P7 PS P3 P1 ELECTRICAL SPECIFICATIONS: NOTE: OPERATING TEMPERATURE RANGE: . _A0'C TO +85C PINS NOT ELECTRICALLY CONNECTED ARE OMITTED. 1.0 INDUCTANCE: (P6J6) : (P1vJ1) : 65 uH TYP @.01V, 10KHz 2.0 DC RESISTANCE: P6J6 : .5 OHM MAX P3-J3 : .5 OHM MAX P2J2 : .5 OHM MAX P1J1 : .5 OHM MAX 3.0 3.0 COMMON MODE: : CMA (dB) FREQUENCY <MHz> TYPICAL MIN 1 8 5 5 17 15 20 23 15 70 20 20 200 22 17 Bel Stewart Connector * 11118 Susquehanna Trail, South MagJac 300 11 6 Glen Rock, Pa 17327-9199 717.234.7512 http://www.stewartconnector.com THIS DRAWING AND THE SUBJECT MATTER SHOWN THEREON ARE CONFIDENTIAL AND PROPERTY OF BEL STEWART CONNECTOR AND SHALL NOT BE REPRODUCED, COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN CONTENT OF BEL STEWART SHEET DRAWING NO. S|46002 O02 CONNECTOR. THE SUBJECT MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING. 1 OF 2 =) l - .267 [6.78] MAX | 670 [17.02] MAX 7 125 [3.18]}.010 [0.25] th MogJade LED POLARITY (ENLARGED VIEW) e 6 SINGLE COLOR LED Part Number CNTRY YYWW FC Bel Stewart qf c: 125 [3.17}4.010 [0.25] 155 [3.94]4.010 [0.25] (SIGNAL) 050 [1.27] +] 085 [2.159] 9.035 +.003 [0.89 +0.08] (8) (SHIELD) (POSTS) .640 [16.26] MAX | PIN #1 +O 9.062 +.003 [1.57 0.08] Ov 050 [1.27] (7) - 128 [3.25] 125 [3.18] Q~ 0 B ||--.024 pat ~, 374 a [9.50] 535 [13.589] $$$ bob L 450 [11.43] - = [2.54] 250 [6.35] |.153 [3.886] a i" 9.040 +.003 [1.02 +0.08] (4) 0) (LED'S) 100 [2.54] P.C.B. RECOMMENDED HOLE LAYOUT SEEN FROM COMPONENT SIDE ALL CENTERLINE DIMENSIONS ARE BASIC. ~ PIN: Jt Y LED [*I YELLOW | = g = g -- LED GREEN LED SPECIFICATIONS N 1. > OTES: CONNECTOR MATERIALS: HOUSING: THERMOPLASTIC UL94 V0 CONTACT/SHIELD: COPPER ALLOY SHIELD PLATING: NICKEL OR TIN CONTACT PLATING: SELECTIVE GOLD, 50 MICRO-INCHES MIN. IN CONTACT AREA. PIN NOT ELECTRICALLY CONNECTED MAYBE OMITTED. SEE ELECTRICAL DRAWING FOR OMITTED PINS. TOLERANCES COMPLY WITH F.C.C. DIMENSION REQUIREMENTS. ALL TOLERANCES NOT OTHERWISE SPECIFIED TO BE +.005 [0.13] WAVE SOLDER COMPATIBLE PREHEAT 125C/90SECS. * FORWARD | * FORWARD | POWER LUMINOUS INTENSITY 10mA STANDARD LED | voctace (wax) | vouTAce (Tp) | DISSIPATION | WAVELENGTH WN MAX YELLOW DIFFUSED 25 a 105 mW 590 nm 2 NCD a MCD DIFFUSED 26V 225 V 105 mw 555 nm 2 NCD a McD WITH A FORWARD CURRENT OF 20 mA Bel Stewart Connector M * 11118 Susquehanna Trail, South ac Glen Rock, Pa 17327-9199 THIS DRAWING AND THE SUBJECT MATTER SHOWN THEREON ARE CONFIDENTIAL AND PROPERTY OF BEL STEWART CONNECTOR AND SHALL NOT BE REPRODUCED, COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN CONTENT OF BEL STEWART CONNECTOR, THE SUBJECT MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING, 717.234.7512 http://www.stewartconnector.com SHEET DRAWING NO. REV. 2 OF 2 SI-46002) 03