Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor's system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. ES1A - ES1D ES1A - ES1D Features * For surface mount applications. * Glass passivated junction. * Low profile package. * Easy pick and place. * Built-in strain relief. * Superfast recovery times for high efficiency. SMA/DO-214AC COLOR BAND DENOTES CATHODE Fast Rectifiers Absolute Maximum Ratings* TA = 25C unless otherwise noted Value Parameter Symbol 1A 50 1B 100 1C 150 1.0 1D 200 Units VRRM IF(AV) Maximum Repetitive Reverse Voltage Average Rectified Forward Current, @ TA=120C IFSM Non-repetitive Peak Forward Surge Current 8.3 ms Single Half-Sine-Wave Storage Temperature Range 30 A -50 to +150 C Operating Junction Temperature -50 to +150 C Tstg TJ V A *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. Thermal Characteristics Parameter Symbol Value Units PD Power Dissipation 1.47 W RJA Thermal Resistance, Junction to Ambient* 85 C/W RJL Thermal Resistance, Junction to Lead* 35 C/W *Device mounted on FR-4 PCB 0.013 mm. Electrical Characteristics Symbol TA = 25C unless otherwise noted Device Parameter 1A VF Forward Voltage @ 1.0 A trr Reverse Recovery Time IF = 0.5 A, IR = 1.0 A, IRR = 0.25 A Reverse Current @ rated VR IR CT Total Capacitance VR = 4.0 V, f = 1.0 MHz 2010 Fairchild Semiconductor Corporation TA = 25C TA = 100C 1C 1B Units 1D 0.92 V 15 ns 5.0 100 A A pF 7.0 ES1A-ES1D, Rev. C1 ES1A - ES1D 10 1.5 1.25 Forward Current, IF [A] Average Rectified Forward Current, IF [A] Typical Characteristics 1 0.75 RESISTIVE OR INDUCTIVE LOAD P.C.B. MOUNTED ON 0.2 x 0.2" (5.0 x 5.0 mm) COPPER PAD AREAS 0.5 0.25 0 0 25 50 75 100 125 Ambient Temperature [C] 150 0.01 TA = 25 C Pulse Width = 300 s 2% Duty Cycle 0.6 0.8 1 1.2 Forward Voltage, VF [V] 1.4 Figure 2. Forward Voltage Characteristics 1000 30 25 Reverse Current, IR [uA] Peak Forward Surge Current, IFSM [A] 0.1 0.001 0.4 175 Figure 1. Forward Current Derating Curve 1 20 15 10 5 0 1 2 5 10 20 Number of Cycles at 60Hz 50 100 Figure 3. Non-Repetitive Surge Current 100 T A = 125 C 10 TA = 75 C 1 T A = 25 C 0.1 0 40 60 80 100 120 140 20 Percent of Rated Peak Reverse Voltage [%] Figure 4. Reverse Current vs Reverse Voltage Total Capacitance, C T [pF] 14 12 10 8 6 4 2 0 0.1 1 10 Reverse Voltage, V R [V] 100 Figure 5. Total Capacitance 50 NONINDUCTIVE 50 NONINDUCTIVE +0.5A trr (-) DUT 50V (approx) 50 NONINDUCTIVE Pulse Generator (Note 2) 0 -0.25A (+) OSCILLOSCOPE (Note 1) NOTES: 1. Rise time = 7.0 ns max; Input impedance = 1.0 megaohm 22 pf. 2. Rise time = 10 ns max; Source impedance = 50 ohms. -1.0A 1.0cm SET TIME BASE FOR 5/ 10 ns/ cm Reverse Recovery Time Characterstic and Test Circuit Diagram 2010 Fairchild Semiconductor Corporation ES1A-ES1D, Rev. C1 B B 5.60 4.80 0.13 M C B A 2.65 2.95 2.50 B 1.65 1.20 4.30 4.75 B 4.00 TOP VIEW A 2.50 MAX LAND PATTERN RECOMMENDATION A 2.20 1.90 B C 0.203 0.050 2.05 1.95 0.30 0.05 0.13 M C B A SIDE VIEW 8 0 R0.15 4X GAGE PLANE 0.45 8 0 1.75 0.41 0.15 1.52 0.75 DETAIL A SCALE 20 : 1 NOTES: A. EXCEPT WHERE NOTED, CONFORMS TO JEDEC DO214 VARIATION AC. B DOES NOT COMPLY JEDEC STANDARD VALUE. C. ALL DIMENSIONS ARE IN MILLIMETERS. D. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR PROTRUSIONS. E. DIMENSIONS AND TOLERANCE AS PER ASME Y14.5-2009. E. LAND PATTERN STD. DIOM5025X231M F. DRAWING FILENAME: MKT-DO214ACrev2 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com