XPort Embedded Device Server
Minimal engineering effort required to web-enable
virtually any electronic device
Remote command and control of edge devices
Real-time edge device status via e-mail alerts
256-bit AES encryption for secure communications
EMC/EMI-compliant; RoHS-compliant
Everything you need – all in a single RJ45 package
Full Networking in a Tiny Package
XPort removes the complexity – of designing network
connectivity into a product by incorporating all of the
required hardware and software inside a single
embedded solution. Smaller than your thumb, it includes
all essential networking features, including a 10Base-
T/100Base-TX Ethernet connection, proven operating
system, an embedded web server, e-mail alerts, a full
TCP/IP protocol stack, and 256-bit AES encryption for
secure communications. This easy-to-embed networking
processor module enables engineers to focus on their
core competency while reducing development time and
cost and increasing product value.
Integrated Network Communications Module
XPort is powered by our DSTni™network processor SoC,
which includes a 10/100 MAC/PHY and 256 KB of SRAM.
It features a built-in web server for communications with
a device via a standard Internet browser. Web capability
can be used for remote configuration, real-time
monitoring or troubleshooting. XPort has 512 KB of on-
module Flash for web pages and software upgrades.
It acts as a dedicated co-processor that optimizes
network activities permitting the host microprocessor
to function at maximum efficiency.
Building Intelligent Devices
With XPort you can embed intelligence into any
electronic product for applications such as:
• Remote diagnostics and upgrades
• Asset tracking and replenishment
• Automation and control
• Power management
• Remote collaboration
• Personalized content delivery
Robust, Feature-Rich Software Suite
Eliminating the need to negotiate the intricacies of
Transmission Control Protocol (TCP) or Internet Protocol
(IP), XPort incorporates:
•Robust Real Time Operating System (RTOS)
•Full-featured network protocol stack
•Proven, ready-to-use serial-to-wireless application
•Built-in web server for device communication and
configuration via a standard browser
The Windows-based DeviceInstaller™makes configuring
one or more XPorts in a subnet quick and easy.
•Install and configure XPort and load firmware
•Assign IP & other network specific addresses
•Set wireless parameters
•Load custom web pages and view specific
device data
•Enable web-based configuration of the device
•Ping or query the attached device(s) over
the network
•Allow Telnet communication with the device(s)
XPort®is a compact, integrated solution to web-enable
any device with serial capability. By incorporating
XPort to a product design, manufacturers can offer
network connectivity as a standard feature within
weeks — so they can be accessed and controlled
over the Internet.
Build Network Connectivity into Your Products,
Quickly and Simply
Embedded Device Server XPort
Embedded Device Server XPort
15353 Barranca Parkway |Irvine |CA 92618 |USA |Tel: 800.526.8764 |Fax: 949.450.7249 |www.lantronix.com
©2008, Lantronix, Inc. Lantronix and XPort are registered trademarks, and DSTni and DeviceInstaller are trademarks of Lantronix, Inc. All other trademarks are the property of their respective owners.
Specifications subject to change without notice. All rights reserved. 910-430 03/08 DGS2500
Features and Specifications
Serial Interface
Interface:CMOS (Asynchronous,5V tolerant)
Data Rates: 300 bps to 921,600 bps
Characters: 7 or 8 data bits
Parity: odd, even, none
Stop Bits: 1 or 2
Control Signals: DTR/DCD, CTS, RTS
Flow Control: XON/XOFF, RTS/CTS
Programmable I/O: 3 PIO pins (software selectable)
Network Interface
Interface: Ethernet 10Base-T or 100Base-TX (Auto-Sensing)
Connector: RJ45
Protocols: TCP/IP, UDP/IP, ARP, ICMP, SNMP, TFTP, Telnet,
DHCP, BOOTP, HTTP and AutoIP
Indicators (LED)
10Base-T connection
100Base-TX connection
Link & activity indicator - Full/half duplex
Management
SNMP, Telnet, serial,internal Web server,and Microsoft
Windows®-based utility for configuration
Security
Password protection
Optional 256-bit AES Rijndael encryption
Internal Web Server
Storage capacity: 384 KB for web pages
Architecture
CPU: Based on the DSTni-EX enhanced 16-bit,48MHz or 88MHz
x86 architecture
Memory: 256 KB SRAM and 512 KB Flash
Firmware: upgradeable via TFTP and serially
Power
Input voltage:3.3 VDC
Environmental
Extended Temp: -40° to 85°C (-40° to 185°F)
Commercial Temp: 0° to 70°C (32° to 158°F)
Storage: -40° to 85°C (-40° to 185°F)
Packaging
Dimensions: 33.9 x 16.25 x 13.5 mm (1.33 x .64 x .53 in)
Weight: 9.6 g (0.34 oz)
Warranty
2-year limited warranty
Included Software
MS Windows-based DeviceInstaller software and MS
Windows-based Com Port Redirector
EX Chip Hardware Diagram
Internal Software Portfolio
186 Core
16-Bit CPU
24-Bit Address
16K Bytes
Boot ROM
256 Kbytes
SRAM
I/O Lines
Serial
Peripheral Interface
(SPI)
Timing
and Control
ADDRESS/DATA BUS
CPU
TIMERS
UART
DMA
INTRPT
CNTLR
WATCH
DOG 10/100 Mbs
Ethernet Interface
PHY
OEM Specific
Device Server Application
Operating System
SNMP, DHCP SMTP, Rijndael
TCP, UDP
IP, ICMP
Ethernet
Web Server, TFTP, Telnet
Drivers
EX Chip
External Reset
Serial Data In
Serial Data Out
Configurable Pin 1
Configurable Pin 2
Configurable Pin 3
3.3 VDC Power
Signal Ground
Power Filters
25 MHz
Clock
1.8 VDC
Regulator
512 Kbytes
Flash Memory
Isolation
& Filtering
Magnetics
Chassis
(Earth) Ground
Ethernet
Transmit & Receive
RJ45 Wiper
Contacts
10/100 Mbit Link Status LED
Full/Half Duplex Activity LED
XPort Hardware and Software
XPort Evaluation Kit
The XPort Evaluation Kit includes everything you need to
integrate the XPort into your next product design, including:
• An XPort Evaluation Board and reference
design including CAD PCB files and complete BOM
• Universal AC power adapter
• Network (CAT5) and serial cable
• Connector adapter
• Data sheet
• Lantronix utilities CD containing new
Com Port Redirector, DeviceInstaller
• Sample code and application notes
• Complete user manual
13.5 mm
16.25 mm
XPort Actual Size
33.9 mm
The included
DeviceInstaller
software makes
configuring XPort
quick and easy!
Model Part Number Description
XPort XE XP1001000-03R XPort RoHS Extended Temperature
Min. Quantity: 50 Units XP1001001-03R XPort RoHS Commercial Temperature
XP1001000M-03R XPort XE RoHS Extended Temperature, with MODBUS
XPort SE XP1002000-03R XPort RoHS Extended Temperature, with Encryption
Min. Quantity: 50 Units XP1002001-03R XPort RoHS Commercial Temperature,with Encryption
XPort SE SMPL XP100200S-03R XPort RoHS Extended Temperature,with Encryption - Sample
XPort 485 XP1004000-03R XPort RS-485 RoHS Extended Temperature,with Encryption
Min. Quantity: 50 Units
XPort 485 SMPL XP100400S-03R XPort RS-485 RoHS Extended Temperature,with Encryption - Sample
XPort Evaluation Kit XP100200K-03 XPort Evaluation Kit, with Encryption
