NEXT FIND IT Table of Contents CLICK FOR PDF FILE CLICK FOR PDF FILE CLICK FOR PDF FILE OVERVIEW - Inductive Proximity Sensors CYLINDRICAL Inductive Proximity Sensors LIMIT STYLE Inductive Proximity Sensors Introduction ........................................4 Operation ............................................5 Introduction/Operation .......................8 Selection Guide, DC styles................12 Selection Guide, AC styles ................14 Product Specifications......................16 Introduction/Operation .....................68 Selection Guide.................................71 Product Specifications......................72 CLICK FOR PDF FILE CLICK FOR PDF FILE BLOCK STYLE Inductive Proximity Sensors RING STYLE Inductive Proximity Sensors ACCESSORIES for Inductive Proximity Sensors Introduction/Operation .....................80 Selection Guide.................................82 Product Specifications......................84 Introduction/Operation .....................98 Selection Guide...............................100 Product Specifications....................102 Introduction ....................................113 Mounting Brackets .........................114 Cable Assemblies............................116 Switching Units...............................122 Motion Detectors............................128 OTHER INFORMATION APPENDIX: IP Codes .........................................132 NEMA requirements .......................133 Cross Reference .............................134 Glossary..........................................135 Conversion Charts ..........................137 INDEX .............................................138 TERMS & CONDITIONS .................141 WARRANTY....................................143 CLICK FOR PDF FILE All specifications subject to change without notice or obligation Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 3 PREVIOUS HOME NEXT FIND IT Ring Style Sensors 98 (c)Altech Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 PREVIOUS RING STYLE INDUCTiVE PROXIMITY SENSORS Altech Ring Sensors are used for variety of applications including punching and stamping operations to detect small metal parts and for the identification of metallic contamination in bulk materials. HOME NEXT FIND IT Operating Voltages - Ring Style Mini Ring 10 - 30V DC Standard Ring 10 - 30V DC High Sensitivity RIng 20 - 30V DC Analog Ring 18-30V DC Operating Current- Ring Style The sensitivity of all Altech Ring Sensors is given in terms of a steel metal ball diameter. This is the minimum diameter steel ball that the sensor will detect. Non-ferrous materials will require larger diameter parts for correct sensor detection. See page 4, Figure 1 for rated operating distance correction factors. OUTPUT CONNECTION Mini Ring - Normally Open (NO) Standard Ring - Complementary High Sensitivity - Complementary Analog - 1-9 Volt Analog RING SENSOR MOUNTING When high sensitivity ring sensors are mounted in or near non-target metal objects, care must be exercised in accordance with the recommendations on the diagram. See Figure 12. Mini Ring 200/400 mA Standard Ring 80 mA High Sensitivity Ring 50 mA Analog Ring 5 mA Sensor Wiring Systems - Ring Style Mini Ring 3 Wire Standard Ring 4-Wire High Sensitivity Ring 4-Wire (must connect to PULSO(R) 8102-0900 Amplifier) Analog Ring 3-Wire Fig. 12 RING SENSOR INSTALLATION Ring Sensors installation in Metal Environment (min. permissible values) SENSOR Inside diameter SENSOR = A Metal Plate hole dia. = B* 9702-0259 9713-0059 9701-0259 9701-0759 9711-0059 9700-0159 9703-0159 9704-0159 20 35 51 51 71 100 202 294 30 60 85 85 120 180 260 400 Side Distances d1 d2 10 40 60 50 65 100 150 200 0 0 0 0 0 30 0 0 * Metal plate must not move A d2 d1 d1 d2 D B C D = C is permissible (c)Altech Corp. * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 99 PREVIOUS HOME NEXT FIND IT DC RING SENSORS - SELECTION GUIDE Size (mm) Series Mini Ring 10-30V DC, 200 mA * Static Output * Detect unwanted metal * Detect and count parts Normal Sensitivity Standard Series 10-30V DC, 80 mA * Static Output * Large ring diameters * Complementary Output 0.5 0.8 1.0 1.1 1.6 2.5 3.0 5.0 6.0 12 15 20 * O50 * O100 * O100 * O200 * O300 O50 O50 O70 O100 O200 130 x 130 * * * * * * * * * * 245 x 290 O20 O43 30 NPN * O43 O300 100 9.0 * O20 O 35 Analog Ring 18-30V DC, 5 mA * Analog Output proportional to target size 8.0 * O12 O20 High Sensitivity Standard Series 20-30V DC, 50 mA * Dynamic Output * Large ring diameters * Complementary Output Function Sensitivity - Mimimum Steel Ball Diam. in mm * * * * * * * * * * * * * * * PNP NO NC * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 PREVIOUS Mounting See Instructions Connection Cable 59 HOME NEXT No. of Wires Housing Material No. of LED's Page 3 ABS 1 102 3 ABS 1 102 3 ABS 1 102 4 Aluminum 1 104 4 Aluminum 1 104 4 Aluminum 1 104 4 Aluminum 1 105 4 Aluminum 1 105 4 Aluminum 1 106 4 Aluminum 1 106 4 Aluminum 1 107 4 Aluminum 1 107 4 Aluminum 1 108 4 Aluminum 1 108 4 Aluminum 1 109 4 Aluminum 1 109 4 4 Aluminum Aluminum 1 1 110 110 * * * * * * * * * * * * * * * * * * * * * * * 3 ABS 0 112 * * 3 ABS 0 112 * * * * * * * * * * * * * * * FIND IT Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 101 PREVIOUS HOME NEXT FIND IT * Applications include detection and counting parts in punching/pressing systems * Detect unwanted metal in grinding operations * Static Output * Carries mark DC - 3 WIRE MINI RING SENSORS Plastic Housing, 10 - 30V DC 200mA/400mA, 1 LED for Output Energized Ring Diameter 12mm (.47 in.) Sensitivity (min. dia. steel ball) 2.5mm (.1 in.) Cable or Connector Style Cat. No. * IEC (529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Short Circuit Protection * Reverse Polarity Protection * Temperature Range: -25 to 70C (-13 to 158F) 20mm (.79 in.) 43mm (1.69 in.) 6mm (.24 in.) 9mm (.35 in.) Cable Cable Cable 9702-0400 9702-0500 9705-0500 Ripple Voltage 10% 10% 10% Voltage Range 10V-30V 10V - 30V 10V - 30V Supply Current 10 mA 10 mA 10 mA Max. Load Current 400 mA 200 mA 200 mA Voltage Drop Across Sensor 2.4V 2.4V 2.4V Max. Leakage Currrent 10 A 10 A 10 A Switching Frequency 800 Hz 1000 Hz 500 Hz PBTP (GV 30) ABS ABS PNP NPN Normally Open Normally Closed Normally Open Normally Closed Housing Material 18 24 10 6 10 6 43 20 18 12 26 ,5 73 8 28 47 ,5 58 58 ,5 73 102 24 26,5 20 39 Fixed Cable PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.) cable length, change the last two digits of the part number to 02. For other cable lengths and/or PUR cable, please consult Altech. 35 Note: Sensor dimensions in mm. Altech Corp (R) * 35 Royal Road * Flemington NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 PREVIOUS HOME NEXT FIND IT Metric/in. Conversion Table 8.0 mm 12.0 mm 18.0 mm 20.0 mm 24.0 mm 26.0 mm 26.5 mm 28.5 mm = = = = = = = = .31 in. .47 in. .70 in. .78 in. .94 in. 1.02 in. 1.04 in. 1.12 in. 35.0 mm = 39.0 mm = 43.0 mm = 47.0 mm = 58.0 mm = 73.5 mm = 106.0mm = 1.37 in. 1.53 in. 1.69 in. 1.85 in. 2.32 in. 2.89 in. 4.17 in. This table converts millimeters to inches in reference to the illustrations included on these pages Accessories Wiring Diagrams Note: Wire colors are applicable on cable purchased from Altech PNP Fixed Cable BR + BK LOAD * - BL Normally Open Altech Corp (R) * 35 Royal Road * Flemington NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 103 PREVIOUS HOME * Carries 50mm (1.97 in.) Sensitivity (min. dia. steel ball) FIND IT * Applications include the detection and counting of parts in punching/pressing operations * Detection of unwanted metal in grinding operations * Complementary outputs available * Static Output DC - 4 WIRE RING SENSORS ALUMINUM HOUSING 10-30V DC, 80mA 1 LED for Output Energized Ring Diameter NEXT 3mm (.12 in.) Cable or Connector Style Cat. No. * IEC(529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Temperature Range: -25 to 70C (-13 to 158F) mark 100mm (3.94 in.) 8mm (.31 in.) 100mm (3.94 in.) 6mm (.24 in.) 59 59 59 PNP (Complementary NO/NC) 9705-0659 9708-0559 9708-0659 NPN (Complementary NO/NC) 9705-0259 9708-0059 9708-0159 10% 10% 10% Ripple Voltage Voltage Range 10-30V 10-30V 10-30V Supply Current 25 mA 25 mA 25 mA Max. Load Current 80 mA 80 mA 80 mA 0.5V NPN 0.5V NPN 0.5V NPN 1.5V PNP 1.5V PNP 1.5V PNP Max. Leakage Current 10A 10A 10A Switching Frequency 500Hz 500Hz 500Hz Voltage Drop Across Sensor 6, 7 2 7 45 50 10 0 10 0 80 59 Style Connector 4-pin, Metal, 19mm (.75 in.) device 40 36 104 6 8 0 12 16 6 0 12 90 8 16 19 0 48 11 5 80 36 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 PREVIOUS HOME NEXT FIND IT Metric/in. Conversion Table 6.2 mm 7.0 mm 8.0 mm 8.5 mm 36.0 mm 40.0 mm 45.0 mm 48.0 mm 50.0 mm = .24 in. = .27 in. = .31 in = .33 in. =1.41 in. =1.57 in. =1.77 in. =1.89 in. =1.96 in. 80.0 mm = 3.15 in. 90.0 mm = 3.58 in. 100.0mm = 3.93 in 115.0mm = 4.52 in. 120.0mm = 4.72 in. 160.0mm = 6.29 in. 162.0mm = 6.37 in. 166.0 mm= 6.52 in. 190.0 mm= 7.47 in. Accessories 2 meter (6 ft. 6 in.) DC Cable Assemblies for Quick Disconnect Sensors 202.0mm = 7.94 in. 260.0mm = 10.23 in 290.0mm = 11.41 in. 294.0mm = 11.20 in. 305.0mm = 12.00 in. 340.0mm = 13.40 in. 382.0mm = 15.03 in. 397.0mm = 15.62 in. 200mm (7.87 in.) 300mm (11.81 in.) 15mm (.59 in.) 30mm (1.18 in.) 59 59 9706-0659 9707-0659 9706-0159 9707-0159 10% 10% 10-30V 10-30V 25 mA 25 mA 80 mA 80 mA 0.5V NPN 0.5V NPN 1.5V PNP 1.5V PNP 10A 10A 300Hz 300Hz This table converts millimeters to inches in reference to the illustrations included in this catalog 59 Connector 9512-0200 PVC, Straight Change last digit of connector number to 2 for 5 meter cable Refer to pages 116-121 for more cable information Note: Sensor dimensions in mm. Wiring Diagrams Note: Wire colors are applicable to cable purchased from Altech NPN 29 4 20 2 PNP RED 3 4 RED * 3 LOAD 4 160 162 1 2 BLK LOAD N/C * + 2 LOAD N/C *- BLK - BL 8, 5 39 7 5 8, 38 34 2 0 BL LOAD * WHT N/O WHT N/O 1 26 0 29 30 0 5 + Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 105 PREVIOUS DC - 4 WIRE HIGH SENSITIVITY RING SENSORS ALUMINUM HOUSING 20-30V DC, 50mA 1 LED for Output Energized HOME * Applications include the detection and counting of parts in punching/pressing operations * Detection of unwanted metal in grinding operations * Complementary outputs available * Dynamic output - must be operated with 8102-0900 Unit * Carries Ring Diameter Sensiitivity (min. dia. stel ball) Cable or Connector Style Cat. No. PNP (Complementary NO/NC) NPN (Complementary NO/NC) Ripple Voltage NEXT FIND IT * IEC(529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Short Circuit Protection * Reverse Polarity Protection * Temperature Range: -25 to 70C (-13 to 158F) mark 20mm (.79 in.) 35mm (1.38 in.) .5mm (.02 in.) .5mm (.02 in.) 59 59 9702-0259 9713-0059 10% 10% Voltage Range 20-30V 20-30V Supply Current 35 mA 35 mA Max. Load Current 50 mA 50 mA 1V at 10 mA 1V at 10 mA 3.5V at 50 mA 3.5V at 50 mA Max. Leakage Current 500A 500A Switching Frequency 100Hz 100Hz Voltage Drop Across Sensor 20 35 80 6, 2 45 7 59 Style Connector 4-pin, Metal, 19mm (.75 in.) device 40 11 5 80 0 12 16 6 19 0 48 36 8 90 106 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 PREVIOUS HOME NEXT FIND IT Metric/in. Conversion Table 6.2 mm 7.0 mm 8.0 mm 35.0 mm 36.0 mm 40.0 mm 45.0 mm 48.0 mm 50.0 mm = .24 in. = .27 in. = .31 in. = 1.37 in. = 1.41 in. = 1.57 in. = 1.77 in. = 1.89 in. = 1.96 in. Accessories 2 meter (6 ft. 6 in.) DC Cable Assemblies for Quick Disconnect Sensors 80.0 mm = 3.15 in. 90.0 mm = 3.58 in. 115.0mm = 4.52 in. 120.0mm = 4.72 in. 166.0 mm= 6.52 in. 190.0 mm= 7.47 in. This table converts millimeters to inches in reference to the illustrations included in this catalog 59 Connector 9512-0200 PVC, Straight Change last digit of connector number to 2 for 5 meter cable Refer to pages 116-121 for more cable information 50mm (1.97 in.) 50mm (1.97 in.) .8mm (.03 in.) 1.0mm (.04 in.) 59 59 9701-0759 9701-0259 10% 10% 20-30V 20-30V 35 mA 35 mA 50 mA 50 mA 1V at 10 mA 1V at 10 mA 3.5V at 50 mA 3.5V at 50 mA 500A 500A 100Hz 100Hz Notes: High Sensitivity Ring Sensors have a dynamic output - a short output pulse (10 msec) is released during metal detection. The 8102-0900 switching unit must be ulilized for proper operation. Note: Sensor dimensions in mm. Wiring Diagrams Note: Wire colors are applicable on cables purchased from Altech 50 50 80 NPN 7 6, 2 45 4 3 11 5 WHT 1 2 19 0 48 36 0 BL 12 16 BLK to 8102-0900 switching unit 90 6 8 RED 40 80 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 107 NEXT * Applications include the detection and counting of parts in punching/pressing operations * Detection of unwanted metal in grinding operations * Complementary outputs available * Dynamic output - must be operated with 8102-0900 Unit * Carries FIND IT * IEC(529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Short Circuit Protection * Reverse Polarity Protection * Temperature Range: -25 to 70C (-13 to 158F) mark Ring Diameter 70mm (2.76 in.) 100mm(3.94) Sensitivity (min. dia. steel ball) 1.1mm (.039 in.) 1.6mm (.059 in.) 59 59 9711-0059 9700-0159 10% 10% Cable or Connector Style Cat. No. PNP (Complementary NO/NC) NPN (Complementary NO/NC) Ripple Voltage Voltage Range 20-30V 20-30V Supply Current 35 mA 35 mA Max. Load Current 50 mA 50 mA 1V at 10 mA 1V at 10 mA 3.5V at 50 mA 3.5V at 50 mA Max. Leakage Current 500A 500A Switching Frequency 100Hz 100Hz 10 0 70 Voltage Drop Across Sensor 7 59 Style Connector 4-pin, Metal, 19mm (.75 in.) device 7 80 80 36 8 6 16 12 0 6 16 108 36 8 0 DC - 4 WIRE HIGH SENSITIVITY RING SENSORS ALUMINUM HOUSING 20-30V DC, 50mA 1 LED for Output Energized HOME 12 PREVIOUS Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 PREVIOUS HOME NEXT FIND IT Accessories Metric/in. Conversion Table 7.0 mm = .27 in. 8.0 mm = .31 in. 8.5 mm = .33 in. 36.0 mm = 1.41 in. 70.0 mm = 2.75 in. 80.0 mm = 3.15 in. 100.0mm = 3.93 in. 120.0mm = 5.50 in. 160.0mm = 6.29 in. 162.0mm = 6.37 in. 166.0 mm= 6.52 in. 202.0mm = 7.94 in. 260.0mm =10.23 in. 290.0mm =11.41 in. 294.0mm = 11.20 in. 305.0mm = 12.00 in. 340.0mm = 13.81 in. 382.0mm = 15.03 in. 397.0mm = 15.62 in. 2 meter (6 ft. 6 in.) DC Cable Assemblies for Quick Disconnect Sensors This table converts millimeters to inches in reference to the illustrations included in this catalog 59 Connector 9512-0200 PVC, Straight Change last digit of connector number to 2 for 5 meter cable Refer to pages 116-121 for more cable information 200mm (7.87 in.) 300mm (11.81 in.) 3.0mm (.118 in.) 5.0mm (.196 in.) 59 59 9703-0159 9704-0159 10% 10% 20-30V 20-30V 35 mA 35 mA 50 mA 50 mA 1V at 10 mA 1V at 10 mA 3.5V at 50 mA 3.5V at 50 mA 500A 500A 100Hz 100Hz Notes: High Sensitivity Ring Sensors have a dynamic output - a short output pulse (10 msec) is released during metal detection. The 8102-0900 switching unit must be ulilized for proper operation. Note: Sensor dimensions in mm. Wiring Diagrams Note: Wire colors are applicable on cables purchased from Altech 29 4 20 2 NPN 4 162 3 RED 160 WHT 1 2 BLK to 8102-0900 switching unit 7 39 5 8, 5 8, 30 5 26 29 0 0 34 38 0 2 BL Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 109 PREVIOUS HOME * Applications include the detection and counting of parts in punching/pressing operations * Detection of unwanted metal in grinding operations * Complementary outputs available * Dynamic output - must be operated with 8102-0900 Unit DC - 4 WIRE HIGH SENSITIVITY RING SENSORS ALUMINUM HOUSING 20-30V DC, 50mA 1 LED for Output Energized * Carries Ring Diameter NPN (Complementary NO/NC) * IEC(529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Short Circuit Protection * Reverse Polarity Protection * Temperature Range: -25 to 70C (-13 to 158F) mark 245 x 290mm (9.65 x 11.42 in.) 5mm (.196 in.) 12mm (.472 in.) Cable or Connector Style Cat. No. (Complementary NO/NC) FIND IT 130 x 130mm (5.12 in. x 5.12 in.) Sensitivity (min. dia. steel ball) PNP NEXT Ripple Voltage 59 59 9709-0359 9709-0259 10% 10% Voltage Range 20-30V 20-30V Supply Current 35 mA 35 mA Max. Load Current 50 mA 50 mA 1V at 10 mA 1V at 10 mA 3.5V at 50 mA 3.5V at 50 mA Max. Leakage Current 500A 500A Switching Frequency 100Hz 100Hz Voltage Drop Across Sensor Note: Sensor dimensions in mm. 0 7 29 16 0 13 13 5 29 0 0 24 19 31 31 0 59 Style Connector 4-pin, Metal, 19mm (.75 in.) device 72 108 34 9 3 32 8 34 2 31 7 18 8 7 110 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 PREVIOUS HOME NEXT FIND IT Metric/in. Conversion Table 7.0 mm = .27 in. 9.0 mm = .35 in. 31.0 mm = 1.22 in. 72.0 mm = 2.83 in. 108.0mm = 4.24 in. 130.0 mm= 5.11 in. 160.0 mm= 6.29 in. 188.0 mm = 7.39 in. 190.0 mm = 7.43 in. 245.0mm = 9.63 in. 297.0mm =11.67 in. 317.0mm =12.45 in. 342.0mm =13.44 in. This table converts millimeters to inches in reference to the illustrations included in this catalog Notes: High Sensitivity Ring Sensors have a dynamic output - a short output pulse (10 msec) is released during metal detection. The 8102-0900 switching unit must be ulilized for proper operation. Accessories 2 meter (6 ft. 6 in.) DC Cable Assemblies for Quick Disconnect Sensors 59 Connector 9512-0200 PVC, Straight Change last digit of connector number to 2 for 5 meter cable Refer to pages 116-121 for more cable information Wiring Diagrams Note: Wire colors are applicable on cables purchased from Altech NPN 4 3 1 2 RED WHT BLK to 8102-0900 switching unit BL Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 111 PREVIOUS HOME NEXT FIND IT * Analog output voltage proportional to metal target size * Carries mark DC - 3 WIRE ANALOG RING SENSORS 18-30V DC, 5mA 1-9 Volt Analog Output Metric/in. Conversion Table * IEC(529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Short Circuit Protection * Overload Protection * Temperature Range: -25 to 70C (-13 to 158F) 18.0 mm 20.0 mm 24.0 mm 26.0 mm 35.0 mm = .70 in. = .78 in. = .94 in. = 1.02 in. = 1.37 in. 43.0 mm = 58.0 mm = 73.5 mm = 106.0mm = 1.7 in. 2.3 in. 2.9 in. 4.2 in. This table converts millimeters to inches in reference to the illustrations included on these pages Accessories Ring Diameter 20mm (.79 in.) 43mm (1.69 in.) Sensitivity (steel ball dia.) O 0.5mm - O6mm O 1mm - O20mm Cable or Connector Style Cat. No. Cable Cable 9714-2000 9714-4300 Voltage Range 18V - 30V DC 18V - 30V DC Supply Current 10 mA 10 mA Maximum Load Current 5mA 5 mA Switching Frequency 50Hz 50Hz Temperature Drift 0.4V 0.4V Repeatability 1% 1% Housing Material ABS ABS 1 - 9V DC 1 - 9V DC Output Voltage Range The analog output voltage can be digitized by the 8100-2100 switching unit and 8100-2400/2500 modules. (Separate Accessory items - refer to pages 125 - 126 for more information.) Note: Sensor dimensions in mm. Wiring Diagrams Note: Wire colors are applicable to cable purchased from Altech 35 26 18 43 24 Analog * - BL 10 10 6 6 24 + BLK 58 58 20 18 BR ,5 73 ,5 112 Fixed Cable 73 Fixed Cable PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.) cable length, change the last two digits of the part number to 02. For other cable lengths and/or PUR cable, please consult Altech. Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490