AZ820
2/17/99W
SUBMINIATURE
DIP RELAY
FEATURES
•Low profile for compact board spacing
•DC coils to 48 VDC
•Life expectancy to 10 million operations
•Standard PC 0.1" grid terminal spacing
•Fits standard 16 pin IC socket
•Epoxy sealed for automatic wave soldering and cleaning
•Meets FCC Part 68.302 1500 V lightning surge
•Meets FCC Part 68.304 1000 V dielectric
•UL file E43203, CSA file LR36664
CONTACTS
Arrangement DPDT (2 Form C)
Bifurcated crossbar contacts
Ratings Resistive load:
Max. switched power: 30 W or 60 VA
Max. switched current: 2 A
Max. switched voltage:150 VDC or 300 VAC
UL Rating: 1 A at 30 VDC
0.5 A at 125 VAC
Material Silver palladium, gold clad
Resistance < 50 milliohms initially
GENERAL DATA
Life Expectancy Minimum operations
Mechanical 1 x 107
Electrical 5 x 105at 1 A 30 VDC
(see table for additional figures)
Operate Time (typical) 5 ms at nominal coil voltage
Release Time (typical) 2 ms at nominal coil voltage
(with no coil suppression)
Capacitance Contact to contact: 1.5 pF
Contact set to contact set: 1.5 pF
Contact to coil: 2.6 pF
Bounce At 10 mA contact current
(typical) 2 ms at operate N.O. side
3 ms at operate N.C. side
Dielectric Strength 1000 Vrms N.C. contact to coil, energized
(at sea level for 1 min.) 1500 Vrms all other points
1000 Vrms across contacts
Meets FCC Part 68.302 lightning surge
Meets FCC Part 68.304 1000 V dielectric
Insulation Resistance 1000 megohms min. at 20°C, 500 VDC,
50% RH
Dropout Greater than 10% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating -55°C (-67°F) to 75°C (167°F)
Storage -55°C (-67°F) to 120°C (248°F)
Vibration 0.062" DA at 10–55 Hz
Shock 20 g
Enclosure P.B.T. polyester
Terminals Tinned copper alloy, P.C.
Max. Solder Temp. 270°C (518°F)
Max. Solder Time 5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight 5 grams
COIL
Power
At Pickup Voltage 250 mW
(typical)
Max. Continuous 1.1 W at 20°C (68°F)
Dissipation .9 W at 40°C (104°F)
Temperature Rise 45°C (81°F) at nominal coil voltage
Temperature Max. 120°C (248°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Relay adjustment may be affected if undue pressure is exerted
on relay case.
4. Specifications subject to change without notice.