FIND IT NEXT SB MARKING TAGS Blank or Imprinted 10 Tags Per Strip 5mm and 6mm Widths Material: Polyamide 6.6 Standard Color: White, Black Imprint Selection of Colors To simplify selection, Marking tags are indicated within a bar (illustrated below) in the ordering area on each terminal block page of this catalog. The Marking Tags suitable for use are shaded. Select the tag best suited for your application. 1 2 3 4 5 6 7 2430.0 2259/RD 2259/BM 2259/GR 2259/YE 2259/OR 50/500 50/500 50/500 50/500 50/500 50/500 White Red Blue Green Yellow Orange SB5/10FW SB5/10FW 2431.0 2431.0 50/500 25/250 Whiteb Whiteb 8 9 SB5/10FS SB5/10FS 2433.0 2433.0 50/500 25/250 Whiteb Whiteb SB5/10GW SB5/10GW SB5/10GW 2432.0 2432.0 2432.0 50/500 25/250 50/500 Whiteb Whiteb Whiteb SB5/10GS SB5/10GS SB5/10GS 2434.0 2434.0 2434.0 50/500 25/250 50/500 Whiteb Whiteb Whiteb BS1 2034.0 1 10 SB5/10 Tags, Vertical Imprint Consecutive Digits (Specify decade a) Nos. 1-10, 11-20, etc. up to 100 Nos. 101-110, etc. up to 999 A handy Cross Reference is provided on page71 to indicate the marking system which can be used for each terminal block type. 20 19 18 TM2 17 TM1 Nos. 1-10, 11-20, etc. up to 100 Nos. 101-110, etc. up to 999 16 66 BR6 SB5/10/WT SB5/10/RD SB5/10/BM SB5/10/GR SB5/10/YE SB5/10/OR SB5/10 Tags, Horizontal Imprint Consecutive Digits (Specify decade a) 15 66 BR5 Color 5.5mm (.217 in.) 14 SB6 5mm (.197 in.) 13 SB5 Std.Pk. Strips/Tags SB5/10 Tags, Blank, White or Colors 50 Strips (500 Tags) per pack 12 AS3 Cat. No. SB5/10 - 5mm (.197 in.) Wide Tags 11 * * * * * * Type SB Marking Tags are supplied blank for hand marking (use our smudgeproof Marking Pen) or they can be ordered with a horizontal or vertical imprint. The standard tag color is white with black imprint. Tags can be ordered with up to 3 characters each. Imprints can be either consecutive or identical characters. SB tags are supplied in packs of 50 and 25 identical strips, 10 tags per strip. Ordering Information Our most popular tags. The cost effective SB system provides quick and accurate identification. SB Push-On Marking Tags are available in two widths and fit all DIN rail mount and panel mount terminal blocks. The SB5/10 is 5mm (.197 in.) wide and used with our high density 5mm wide terminal blocks. The SB6/10 is 6mm (.236 in.) wide and can be used on all 6mm wide and other width terminal blocks. Up to two SB tags can be easily snapped into marking tag provisions on either side of the terminal block. They can be inserted individually or as strips of 10 tags on 5mm and 6mm wide terminal block assemblies for quick and easy marking. SB5/10 Tags, Horizontal Imprint Identical Characters (specify digits, charactersa) Nos. 1, 2, 3... up to 100 Nos. 101 up to 999 Characters A, B... up to Z, Symbols +, -, 1 1 1 1 1 1 1 1 1 1 SB5/10 Tags, Vertical Imprint Identical Characters (specify digits, charactersa) 2 2 2 2 2 2 2 2 2 2 Nos. 1, 2, 3... up to 100 Nos. 101 up to 999 Characters A, B... up to Z, Symbols +, -, Marking Pen for Hand Marking Black Ink, waterproof and smudgeproof a 66 See HOW-TO-ORDER on page 67. b Imprints on color tags are available, please consult Altech Altech Corp.(R) * 35 Royal Road * Flemington NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 PREVIOUS HOME Ordering Information Type Cat. No. SB6/10 - 6mm (.236 in.) Wide Tags Std.Pk. Color Strips/Tags SB6/10 Tags, Blank, White or Colors 50 Strips (500 Tags) per pack 6mm (.236 in.) FIND IT NEXT SB6/10 SB6/10/RD SB6/10/BM SB6/10/GR SB6/10/YE SB6/10/OR 2035.0 2291/RD 2291/BM 2291/GR 2291/YE 2291/OR 50/500 50/500 50/500 50/500 50/500 50/500 White Red Blue Green Yellow Orange SB6/10FW SB6/10FW 2036.0 2036.0 50/500 25/250 Whitec Whitec SB6/10FS SB6/10FS 2037.0 2037.0 50/500 25/250 Whitec Whitec SB6/10GW SB6/10GW SB6/10GW 2102.0 2102.0 2102.0 50/500 25/250 50/500 Whitec Whitec Whitec c 5.5mm (.217 in.) SB6/10 Tags, Horizontal Imprint Consecutive Digits (Specify decadea) Nos. 1-10, 11-20, etc. up to 100 Nos. 101-110, etc. up to 999 1 2 3 4 5 6 7 8 9 10 SB6/10 Tags, Vertical Imprint Consecutive Digits (Specify decadea) 20 19 18 17 16 15 14 13 12 11 Nos. 1-10, 11-20, etc. up to 100 Nos. 101 up to 999 SB6/10 Tags, Horizontal Imprint Identical Characters (specify digits, charactersa) Nos. 1, 2, 3... up to 100 Nos. 101 up to 999 Characters A, B... up to Z, Symbols +, -, 1 1 1 1 1 1 1 1 1 1 SB6/10 Tags, Vertical Imprint Identical Characters (specify digits, charactersa) Marking Pen for Hand Marking Black Ink, waterproof and smudgeproof a See HOW-TO-ORDER on this page SB6/10GS SB6/10GS SB6/10GS 2103.0 2103.0 2103.0 50/500 25/250 50/500 BS1 2034.0 1 White Whitec Whitec 2 2 2 2 2 2 2 2 2 2 Nos. 1, 2, 3... up to 100 Nos. 101 up to 999 Characters A, B... up to Z, Symbols +, -, c HOW-TO-ORDER Imprinted SB Marking Tags 1. Select the tag size for the terminal block to be marked 2. Select color or imprint 3. Designate color or imprint as a suffix "/___" after the Type and Cat.No. EX: Cat.No. 2037.0/1-10, Type SB6/ 10FS (for 6mm white tags numbered vertically with consecutive digits 1-10 .) EX: Cat. No. 2291/R, Type SB6/10 for blank 6mm red tags.) Imprints on color tags are available, please consult Altech Altech Corp.(R) * 35 Royal Road * Flemington NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 67 PREVIOUS HOME FIND IT NEXT AS 3 MARKING TAGS The versatile AS3 marking tags easily adapt to changing requirements. Create up to 4-character markings from just a few single-character standard tags. Reduce the need for large inventory of custom imprinted tags. AS3 tags are especially suitable for smaller jobs with special marking requirements. Up to four tags can be inserted into marking tag provisions on each side of the terminal block. Refer to the Cross Reference on page 71 for exact number of tags for each terminal block. * Blank or Imprinted * 10 Tags Per Strip * Tag, Carrier Material: Polyamide 6.6 * Standard Color: White, Black Imprint * Selection of Colors To simplify selection, Marking Tags are indicated within a bar (illustrated below) in the ordering area on each terminal block page of this catalog. The marking tags appropriate for use are shaded. Select the tag best suited for your application. AS3 SB5 SB6 BR5 BR6 TM1 Type Cat. No. AS3/10 AS3/10/RD AS3/10/BM AS3/10/GR AS3/10/YE AS3/10/OR 2571.0 2571/RD 2571/BM 2571/GR 2571/YE 2571/OR AS3/10G 2573.0 Type Cat.No. Std. Pk. 3 Tag Carrier 4 Tag Carrier 5 Tag Carrier 6 Tag Carrier SCHT3 SCHT4 SCHT5 SCHT6 2616.0 2617.0 2618.0 2619.0 100 100 100 100 Marking Pen for Hand Marking Black Ink, waterproof and smudgeproof BS1 2034.0 1 AS3 Tag, Blank, White or Colors 50 Strips (500 Tags) per pack 5mm (.197 in.) 2.5mm (.098 in.) Marking Tag Carriers Std. Pk. Strips/Tags 50/500 White 50/500 Red 50/500 Blue 50/500 Green 50/500 Yellow 50/500 Orange 50/500 L TM2 68 A handy Cross Reference Chart is provided on page 71 to indicate the marking system which can be used on each terminal block type. HOW-TO-ORDER AS3 MarkingTags 1. Designate required imprint as a suffix "/___" after the Type and Cat. No. EX: Type AS3/10G, Cat. No. 2573.0/A for identical character A. 68 Color White A A A A A A A A A AS3 Tag, Imprinted on White Identical Charactersa 0 - 9, A - Z, a - z, +, --, 50 Strips (500 Tags) per pack A For applications requiring markings with more than 4 characters, Tag Carriers (SCHT) are available which accept up to 6 AS3 tags. They insert into the standard marking tag provisions on the terminal blocks. (Note : Tag Carriers may overhang due to the extra length.) Ordering Information AS3 tags are supplied in strips of 10 tags (50 identical strips per package, 500 tags) which can be separated at any point. Available in standard white or in a selection of colors, they can be ordered blank for hand marking (use our smudgeproof Marking Pen) or imprinted with a single character black imprint. Imprints are available with consecutive or identical numbers, letters or symbols. Please specify desired imprint when ordering. a See HOW-TO-ORDER on this page Altech Corp.(R) * 35 Royal Road * Flemington NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 Length (L) mm (in.) 9.5 (.37) 12.5 (.49) 15.8 (.62) 19.0 (.75) PREVIOUS HOME FIND IT NEXT BR MARKING TAGS Some circuits require complex marking. Extra large BR tags are ideal whenever multiple digits or extra large markings are required. Their large surface makes them ideal for hand marking or multi-character custom imprinting using the Altech Computer Plotter Marking System. BR tags are offered in 5mm (.197 in.) or 6mm (.235 in.) widths. They can be supplied blank for hand marking, or ordered with vertical or horizontal imprints. Vertical imprints are typically used when mounting the terminal block assembly vertically. However, when multidigit imprints are used, the vertical imprint may be more desirable, even when the rail is mounted horizontally. Ordering Information 20/200 20/200 20/200 20/200 20/200 20/200 White Red Blue Green Yellow Orange BR10/5FW 2611.0 1/10 c White BR10/5FS 2612.0 1/10 c White BR12/6 BR12/6/RD BR12/6/BM BR12/6/GR BR12/6/YE BR12/6/OR 2613.0 2702/RD 2702/BM 2702/GR 2702/YE 2702/OR BR12/6FW 2614.0 1/10 c White BR12/6FS 2615.0 1/10 c White BS1 2034.0 1 Y1851K Y1850J Y1849I Y1848H Y1847G Y1846F Y1845E Y1844D BR6 Tags, Blank, White or Colors 6mm (.236 in.) 69 2610.0 2701/RD 2701/BM 2701/GR 2701/YE 2701/OR BR6 - 6mm (.236) Wide Tags 69 TM1 Y1843C Y1842B BR5 Tags, Vertical Custom Imprint (Specify Imprintb ) To simplify selection, Marking Tags are indicated within a bar (illustrated below) in the ordering area on each terminal block page of this catalog. The Marking Tags appropriate for use are shaded. Select the tag best suited for your application. Refer to the Cross Reference at the end of this section to determine which marking system can be used for each terminal block type. BR6 BR10/5 BR10/5/RD BR10/5/BM BR10/5/GR BR10/5/YE BR10/5/OR 32x 32x 32x 32x 32x 32x 32x 32x 32x 32x 678 679 680 681 682 683 684 685 686 687 Blank or Imprinted 10 Tags Per Strip Material: Polyamide 6.6 Standard Color: White, Black Imprint, Selection of Colors (Blank Only)a BR5 5mm (.197 in.) BR5 Tags Horizontal Custom Imprint (Specify Imprintb ) BR tags easily insert into marking tag provisions on one or both sides of all terminal blocks. They can be inserted individually, or as strips of 10 tags on 5mm and 6mm wide terminal block assemblies for quick and easy marking. SB6 Color 10mm (.394 in.) The 5mm BR tag can be imprinted with up to 6 characters either horizontally or vertically. The 6mm BR tag can be imprinted with up to 8 characters horizontally, or 7 characters vertically. SB5 Std.Pk. Strips/Tags BR5 Tags, Blank, White or Colors 20 Strips (200 Tags) per pack The standard tag color is white, with a black imprint. Tags are supplied in strips of 10 for quick installation. There are 20 strips to a standard pack (200 tags). AS3 Cat. No. BR5 - 5mm (.197) Wide Tags Character imprints can be numeric, alphabetic, symbols, or any combination thereof. * * * * * Type 20/200 20/200 20/200 20/200 20/200 20/200 White Red Blue Green Yellow Orange 12mm (.472 in.) BR6 Tags, Horizontal Custom Imprint (Specify Imprintb ) 20 Strips (200 Tags) per pack I219 I220 I221 I222 I223 I224 I225 I226 I227 I228 3T80 4T81 5T82 6T83 7T84 8T85 9T86 0T87 1T88 2T89 TM2 0-376-G0 0-375-G9 0-374-G8 0-373-G7 0-372-G6 0-371-G5 0-370-G4 0-369-G3 0-367-G1 HOW-TO-ORDER BR Custom Imprinted Tags 1. Select the tag size for the terminal block to be marked. 2. Identify imprint, either horizontal or vertical. 3. Prepare typed Character Imprint Schedule, including digits, letters and/or symbols. (See page 259) 4. Attach Imprint Schedule to your order. 0-368-G2 BR6 Tags, Vertical Custom Imprint (Specify Imprintb ) Marking Pen, for Hand Marking Black Ink, waterproof and smudgeproof If you need further assistance, please contact Altech. c a Imprints on color tags are available, please consult Altech. b See "HOW-TO-ORDER" on this page. No standard pack, order strips of 10 tags as required. Altech Corp.(R) * 35 Royal Road * Flemington NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 69 PREVIOUS HOME FIND IT NEXT TM TOP MARKING EXTRUSIONS TM Top Marking Extrusions snap onto the tops of terminal block assemblies to provide a wide surface for multi-character markings. They also can be used as protective covers for internal jumpers. Extrusions are supplied blank for hand marking or for applying computer inprinted labels. Custom computerimprinted labels, as well as blank labels supplied in rolls are available. Please consult Altech for ordering information. TM Top Marking Extrusions are offered in two widths to fit most standard terminal blocks. TM1 is 12mm (.472 in.) wide. TM2 is 7mm (.276 in.) wide. Both are supplied in .5m (19.7 in.) lengths which can be easily cut to size. * * * * * Large, Marking Surface Easily Cut Extrusions Extrusion Material: PVC Standard Color: White Imprinted Labels Available TM1 TM2 Installed on Terminal Block Assembly Installed on Terminal Block Assembly Ordering Information Type Cat. No. TM1 Top Marking System Blank Extrusion, .5m (19.7 in.) TM1 8884.0 Std. Pk. BS1 2034.0 Cat. No. TM2 8885.0 10 10 BS1 2034.0 10 To simplify selection, Marking Tags are indicated within a bar (illustrated below) in the ordering area on each terminal block page in this catalog. The Marking Tags appropriate for use are shaded. Select the tag best suited for your application. AS3 SB5 SB6 BR5 BR6 TM1 TM2 70 70 A Handy Cross Reference Chart is provided on page 71 to indicate the marking system which can be used on each terminal block type. 70 Std. Pk. 10 TM2 Top Marking System Blank Extrusion, .5m (19.7 in.) Marking Pen for hand marking Black Ink, waterproof and smearproof Type Altech Corp.(R) * 35 Royal Road * Flemington NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 PREVIOUS HOME FIND IT NEXT Marking Tag Cross Reference Maximum Number Of Tags Per Terminal Block Side Are Indicated Terminal Block Type Catalog Page No. SRK2.5 10 RK1.5-4 10 KBL1.5-4 10 RK2.5 10 KBL2.5 10 RK2.5-4 11 KBL2.5-4 11 RK6-10 11 KBL6-10 11 RK16 11 RK35 11 RK50 12 RK95 12 RK150 12 RK240 13 RKD2.5 (all) 16 KBLD2.5 16 RKD4 (all) 16 KBLD4 16 RK2.5-4ZR 18 RK2.5-4ZRL 18 DLI2.5 (all) 19 RKT2.5 (all) 17,25 TRK1.5 20 TK2/K 20 TRK1.5/DS 21 STK1 23 STK1 (LED) 23 SIK10 (all) 22 SIK10/Z (all) 22 SK3X 23 RKD4D (all) 24,25,26,27,28 IK2.5 (all) 30 IKT2.5 (all) 31 SLN2.5 (all) 32 SL2.5 (all) 32 SL4 (all) 33 SL10 (all) 33 SL16 (all) 33 SL35 (all) 33 TSK2.5 29 SRK2.5/15 35 RK1.5-4/15 35 SL4/15 37 TRK1.5/15 36 TRK1.5/15DS 36 STK1/15 37 STK1/15 (LED) 37 BKA2.5 38 BKA4 38 RKB4 39 1 2 3 4 5 6 Terminal Block Width mm (in.) 5 (.197) 6 (.236) 6 (.236) 5 (.197) 5 (.197) 6 (.236) 6 (.236) 8 (.315) 8 (.315) 12 (.472) 16 (.630) 20 (.787) 25 (.984) 31 (1.22) 36 (1.42) 5 (.197) 5 (.197) 6 (.236) 6 (.236) 6 (.236) 6 (.236) 6 (.236) 5 (.197) 6.5 (.256) 8 (.315) 6.5 (.256) 8 (.315) 6 (.236) 8 (.315) 10 (.394) 13 (.512) 6 (.236) 5 (.197) 5 (.197) 6 (.236) 6 (.236) 8 (.315) 10 (.394) 12 (.472) 16 (.630) [2] 5 (.197) 5 (.197) 6 (.236) 7 (.276) 6.5 (.256) 6.5 (.256) 8 (.315) 6 (.236) 5 (.197) 6 (.236) 6 (.236) AS3 SB5 SB6 1 2 20 4 40 4 40 4 40 4 4 4 4 6 6 42 40 42 40 4 4 4/6 6 62 4 2 20 4 4 4 4 4 8 1 10 1 10 1 1 1 1 1 1 TM2 1 X X X X X X X X 23 203 23 20 2 2 2/36 33 23 10 1 1 2/36 X X X X 33 2 24 /15 3 24 /15 24 /15 2 2 1 23 33 /13 33 1 24 2 24 24 1 1 1 23 X 33 /13 33 1 2 2 2 2 2 4 1 1 1 1 1 1 1 X X X 2 1 1 1 2 3 1 24 /15 4 6 2 2 2 1 10 23 203 2 TM11 1 10 2 20 2 20 2 2 2 2 3 3 4 4 BR6 1 1 10 6 42 62 /12 62 BR5 1 1 1 24 1 1 1 1 2 1 14 1 1 X X Top Marking Extrusion, (1) per terminal block assembly Includes (2) per level Includes (1) per level Lever Top Opposite Hinge Side Ground Side Altech Corp.(R) * 35 Royal Road * Flemington NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 71 PREVIOUS HOME NEXT FIND IT WIRE MARKERS Easy to read imprinted Wire Marker sleeves facilitate wiring and can accommodate a wide range of wire sizes. Any desired combination of numbers can be made from only ten standard numbers per wire range -- without ordering custom-imprinted tags. Blank marker sleeves for hand marking, and marker sleeves with alphabetical imprints, as well as -, +, symbols are also available. The flat character imprint surface ensures non-distorted imprints, while the chevron cut prevents misalignment of characters. D E U N I T N O C S I D Wire Markers are available in standard pack reels. Ordering is simple, just indicate the required imprint as a suffix to the Type and Cat. No. (see example below). The tapered Applicator Tool insures fast, easy mounting of markers onto the wire. * 22 - 0 AWG Wire Range * Selection of Imprints * Material: PVC * Standard Color: Yellow, Black Imprint Ordering Information Approx. AWG Wire Marker Sleeves with Identical Number Imprint, 0-9 Packed on Reels (Specifiy Imprinta ) 22-20 18-14 Insulation O.D. Range mm (in.) Hand Application Tool Application Type 1.5- 2.3 (.06-.09) 2.3- 3.0 (.06-.12) WMS6 906.0 1000/Reel 2.0- 3.0 (.08-.12) 3.0- 4.2 (.12-.17) WMS8 908.0 1000/Reel 2.5- 4.8 (.10-.19) 4.8- 5.8 (.19-.23) WMS12 912.0 1000/Reel 4.4- 7.5 (.17-.30) 7.5-10.0 (.30-.39) WMS24 924.0 500/Reel 7.9-10.5 (.31-.41) 10.5-41.5 (.41-.57) WMS36 936.0 250/Reel WMT6 WMT8 WMT12 WMT24 WMT36 806.0 808.0 812.0 824.0 836.0 1 1 1 1 1 Cat. No. Std.Pk. 14-10 8-4 4-0 Applicator Tool Teflon Coated Steel For Use With Wire Marker Types WMS6 WMS8 WMS12 WMS24 WMS36 When ordering, specify Imprint by designating desired imprint as a suffix "/ __" after the Type and Cat. No. EX: Type WMS8/9, Cat. No. 908.0/9 (when ordering the imprint 9) a 72 Altech Corp.(R) * 35 Royal Road * Flemington NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490