APEM www.apem.com D-5
D
TR series
Tiny washable rocker switches
Distinctive features and specifications
MATERIALS
• Case : PBT
• Actuator : polyamide
• Contacts and terminals :
0: brass, gold plated
1: brass, silver plated
3: brass, gold plated
(1,27 micron gold)
8: contact brass, gold plated
+ tin plated terminals
9: contact brass, gold plated
(1,27 micron gold) + tin plated
terminals
• Terminal seal : epoxy
GENERAL SPECIFICATIONS
• Strength of terminals : pull-out force - 10N max.
• Operating temperature : -30°C to +85°C
• Moisture : 21 days 95 % (NFC 20-603 - IEC 68-2-3)
• Cleaning : solvents or water + detergent
• Wave soldering : 260°C - 5 sec.
ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load :
- gold plated contacts : 0,4VA 20V max. AC or DC
- silver plated contacts : 0,5A 48V max. AC or DC
• Minimum load : 10mA 50mV - 10µA 5VDC
• Contact resistance : 20 mΩmax.
• Insulation resistance : 1.000 MΩmin. at 500VDC
• Dielectric strength :
1.000 Vrms 50 Hz min. between terminals and frame
500 Vrms 50 Hz min. between terminals
• Electrical life at full load :
Contacts
Gold plated
Silver plated 60.000 30.000
20.000 10.000
Number of cycles
2 positions 3 positions
Sealed
• Single piece case
• O-ring seal between actuator and bushing
• Epoxy sealed terminals
Wide variety of contact materials
Same PCB layout as tiny toggle (TL), pushbutton (TP)
and slide switches (TG)
D-6 APEM www.apem.com
D
TR series
Tiny washable rocker switches
Overview
TR
SERIES
Number of poles
3Single pole
4Double pole
Electrical functions
6ON - ON
9ON OFF ON
7MOM OFF MOM
8ON OFF MOM
2ON - MOM
Terminals
P0 Straight PC
Y0 Bracket mounting
W0 Right angle, horizontal mounting
WW Right angle, vertical mounting
MW Wire-wrap
ABOUT THIS SERIES
On the following pages, you will find successively :
- model structure of switches
- options in the same order as in above chart
Dimensions : first dimensions are in mm while inches are shown as bracketted numbers.
NOTICE : please note that not all combinations of above numbers are available.
Refer to the following pages for further information.
00
Contacts and terminal
materials
0Brass, gold plated
1Brass, silver plated
3Brass, gold plated
(1,27 micron gold)
8Contact brass, gold
plated + tin plated
terminals
9Contact brass, gold
plated (1,27 micron
gold) + tin plated
terminals (SP only)
Case colour
00 Blue
Rockers
10 Small
20 Large
Special options
00 No special requirement
07 Trimmed terminals - length 3,2 (.125)
08 Extended terminals
18 Switch without ground plate
20 Ground plate with 2 pins
25 Trimmed terminals - length 5 (.196)
30 Wire-wrap on bracket mounting models
50 Crimped ground plate pins
Packaging unit : 50 pieces.
APEM www.apem.com D-7
D
TR series
Tiny washable rocker switches
Right angle terminals - horizontal mounting : TR..W0
Straight terminals - bracket mounting : TR..Y0
Straight PC terminals : TR..P0
MODEL
STRUCTURE
III II I
Single pole Double pole
TR36P0 TR46P0 ON - ON
TR39P0 TR49P0 ON OFF ON
TR37P0 TR47P0 MOM OFF MOM
TR38P0 TR48P0 ON OFF MOM
TR32P0 TR42P0 ON - MOM
• Straight PC, right angle or wire-wrap terminals
• 1 and 2 pole configurations
III II I
Single pole Double pole
TR36Y0 TR46Y0 ON - ON
TR39Y0 TR49Y0 ON OFF ON
TR37Y0 TR47Y0 MOM OFF MOM
TR38Y0 TR48Y0 ON OFF MOM
TR32Y0 TR42Y0 ON - MOM
III II I
Single pole Double pole
TR36W0 TR46W0 ON - ON
TR39W0 TR49W0 ON OFF ON
TR37W0 TR47W0 MOM OFF MOM
TR38W0 TR48W0 ON OFF MOM
TR32W0 TR42W0 ON - MOM
Shown with small rocker (code 10)
1 23
(.027)
(.129)
3.30
0.70
(.598)
(.027)
15.20
0.70
2.54
5.08
5.08
3.50
0.70
ø1.10
2.54
5.08
2.54
ø1.10
3.30
9.60
8.10
0.50
3.30
5.55
(.043 DIA)
(.200)
(.100)
(.043 DIA)
(.100)
(.100)
(.200)
(.200)
(.129)
(.027)
(.218)
(.137)
(.377)
(.019)
(.318) (.129)
(.229)
(.437)
(.350)
5.84
11.10
8.90
24°
5.08
(.200)
2.54
(.100)
2.54
(.100)
14.75
(.580)
IIIIII
321
(.120)
3.05 (.198)
5.05
654
3
6
(.027)
0.70
3.30 8.60
1.00
5.08
Ø1.10
10.16
2.54
Ø1.10
10.16
2.54
9.10
0.50
10.16
5.00
0.40
(.196)
(.129) (.338)
(.019)
(.400)
(.015)
(.039)
(.358)
(.043 DIA)
(.400)
(.100)
(.200)
(.043 DIA)
(.400)
(.100)
(.437)
(.350)
(.229)
11.10
8.90
5.84
24˚
(.200)
5.08
(.580)
14.75
(.100)
2.54
III II I
123
456
14
24˚
5.84
(.229)
(.100)
(.043 DIA)
(.200)
(.100)
(.043 DIA)
(.027)
(.358)
(.039)
(.019)
(.129)
(.196)
5.00
0.50 0.70
9.10
2.54
Ø1.10
2.54
Ø1.10
5.08
1.00
3.30
0.70
(.027)
(.366)
(.452)
(.318)
2.54
(.100) (.200)
5.08
9.308.10
11.50
14.75
(.580)
III II I
123
456
14
D-8 APEM www.apem.com
D
TR series
Tiny washable rocker switches
Wire-wrap terminals : TR..MW
Right angle terminals - vertical mounting : TR..WW
III II I
Single pole Double pole
TR36WW TR46WW ON - ON
TR39WW TR49WW ON OFF ON
TR37WW TR47WW MOM OFF MOM
TR38WW* TR48WW* ON OFF MOM
TR32WW* TR42WW* ON - MOM
III II I
Single pole Double pole
TR36MW TR46MW ON - ON
TR39MW TR49MW ON OFF ON
TR37MW TR47MW MOM OFF MOM
TR38MW TR48MW ON OFF MOM
TR32MW TR42MW ON - MOM
* Functions 2 and 8 : reversed connection available . Consult factory.
PANEL CUT-OUT
With small With large
rocker rocker
PCB MOUNTING
(.452)
(.366)
(.027)
0.70
1.00
5.08
Ø1.10
2.54
Ø1.10
2.54
9.10
0.70
0.50
5.00
(.196)
(.019)
(.039)
(.358)
(.027)
(.043 DIA)
(.100)
(.200)
(.043 DIA)
(.100)
(.229)
5.84 24˚
(.318)
(.598)
(.318)
(.100) (.200)
15.20
8.10 9.30
11.50
8.10
2.54 5.08
14.75
(.580)
III II I
321
456
14
0.50
5.08
3.50
5.08
5.08 2.54
5.08
5.08
5.08
5.08
8.65
3.30
0.70
(.043 DIA)
Ø1.10
(.043 DIA)
Ø1.10
(.100)
(.200)
(.200)
(.200)
(.019)
(.027)
(.137)
(.200)
(.200)
(.340)
(.200)
(.200)
(.129)
(.358)
9.10
(.196)
5.00
(.437)
(.350)
(.229)
11.10
8.90
5.84
(.100)
2.54
24˚
(.580)
14.75
IIIIII
1
2
3
6
5
4
63
(.582)
(.259)
(.582)
(.330)
6.60
8.40
14.8014.80
9.60
(.377)
(.196)
5.00
8.65
4.60
5.55
3.05
(.181)
(.340)
(.218)
(.120)
(.775)
(.775)
19.70
19.70
CONTACT AND TERMINAL MATERIALS
0Brass, gold plated
1Brass, silver plated
3Brass, gold plated (1,27 micron gold)
8Contact brass, gold plated + tin plated terminals
9Contact brass, gold plated (1,27 micron gold) + tin plated terminals (single pole only)
00 Blue
CASE COLOUR
00
APEM www.apem.com D-9
D
TR series
Tiny washable rocker switches
30
SPECIAL OPTIONS
ROCKERS
07 Trimmed terminals - length 3,2 mm (.125) for TR..WW models only
00 No special requirement
08 Extended terminals for TR..W0 models only
18 Switch without ground plate for TR..WW models only
07
08
18
25 Trimmed terminals - length 5 mm (.196) for all models, except TR..WW
25
50 Crimping of ground plate pins.
Retains switch on PCB during handling and wave soldering.
For models TR..W0, TR..WW and TR..Y0 single and double pole.
50
10 20
20 Ground plate with 2 pins for TR..WW models only
20
30 Wire-wrap terminals on models with mounting bracket
Small Large
Rocker
colours
Replace "0" by
number
1blue
1/4 dark blue
2black
3green
4grey
5yellow
6red
7ivory
7/1 white
9orange
Marking on rocker : consult factory.
(.125)
3.20
(.196)
5.00
2.70
(.106)
10.16
(.400)
(.598)
15.20
(.492)
12.50
(.229)
(.437)
(.350)
24˚
(.580)
11.10
8.90
5.84
14.75
(.437)
(.350)
(.580)
24˚
(.300)
11.10
8.90
7.62
14.75