FM CONNECTOR 1.0mm Emboss Tape Connectors for FFC and FPC pitch Features------------------------ * Compact Having no complicated cam or slide mechanism, this connector is small with a mounting height of only 4.4mm and a width of 3.0mm. * Double-sided contact This connector has highly resilient phosphor bronze contacts, each of which has two independent mating spring members that ensure continuity even when subjected to severe vibration. Because each of the contacts simultaneously mates with both sides of the FFC or FPC, the engineer has greater freedom in designing his circuitry. * Simple snap-in action The FFC or FPC are securely connected by simply inserting their leads into the connector. The FM connector, a miniature connector with a thickness of only 3.0mm, was developed to connect flexible flat cables (FFC) or flexible printed circuits (FPC) with a lead pitch of 1.0mm to printed circuit boards. It is ideally suited for connections inside high-density equipment or between mechanical units. The contact is constructed to ensure a stable connection and high reliability even under vibration and impact. Connection is easy with a simple snap-in action. * Surface mount model (SMT) This connector is also available in a surface mount configuration. Its housing is made of heat resistant resin so that it is not adversely affected during reflow soldering. Because of its tiny size and ability to be surface mounted, this connector meets the demand for high-density mounting of components inside electronic products. Specifications ------------------- * Current rating: 0.5A AC, DC * Voltage rating: 50V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/20m max. After environmental testing/30m max. * Insulation resistance: 800M min. * Withstanding voltage: 500V AC/minute * Applicable FFC and FPC: Conductor pitch/1.0mm Conductor width/0.7mm Mating part thickness/0.33+0.02 -0.03 mm * Applicable PC board thickness: 0.8 to 1.6mm <Note>FFC/FPC to be actually used should be checked for applicability. * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. Standards ---------------------- 0 1 Recognized E60389 Certified LR20812 1 FM CONNECTOR Connector --------------------------------------------------------------- Top entry type (SMT type) (Through-hole type) B C A B C A 7.3 1.5 4.4 1.0 Insertion depth 2.8 2.8 Circuit No.1 2.0 0.5 0.4 2.0 3.0 3.0 Insertion depth 4.4 1.5 1.0 2.9 Circuit No.1 0.4 Circuit No.1 Side entry type (SMT type) (Through-hole type) B C A 1.5 1.0 B C A 4.4 2.8 1.5 1.0 Insertion depth 0.4 3.0 4.4 2.8 3.0 3.0 Insertion depth Circuit No.1 1.9 Circuit No.1 Circuit No.1 0.4 0.5 4.35 2.0 Through-hole type connector Dimensions (mm) Model No. of Through-hole type Circuits Top entry type Side entry type 3 03FM-1.0BT 4 04FM-1.0BT 5 Q'ty / box A B C 03FM-1.0ST 2.0 5.0 4.1 2,000 04FM-1.0ST 3.0 6.0 5.1 2,000 05FM-1.0BT 05FM-1.0ST 4.0 7.0 6.1 2,000 6 06FM-1.0BT 06FM-1.0ST 5.0 8.0 7.1 1,000 7 07FM-1.0BT 07FM-1.0ST 6.0 9.0 8.1 1,000 8 08FM-1.0BT 08FM-1.0ST 7.0 10.0 9.1 1,000 10 10FM-1.0BT 10FM-1.0ST 9.0 12.0 11.1 1,000 11 11FM-1.0BT 11FM-1.0ST 10.0 13.0 12.1 1,000 12 12FM-1.0BT 12FM-1.0ST 11.0 14.0 13.1 1,000 SMT type connector on embossed-tape Circuits Q'ty / reel Dimensions (mm) Model No. Top entry type Side entry type A B C 3 - 03FM-1.0SP-1.9-TF 2.0 5.0 4.1 - 2,500 4 04FM-1.0BP-TF 04FM-1.0SP-1.9-TF 3.0 6.0 5.1 1,000 2,500 5 05FM-1.0BP-TF 05FM-1.0SP-1.9-TF 4.0 7.0 6.1 1,000 2,500 6 06FM-1.0BP-TF 06FM-1.0SP-1.9-TF 5.0 8.0 7.1 1,000 2,500 7 07FM-1.0BP-TF 07FM-1.0SP-1.9-TF 6.0 9.0 8.1 1,000 2,500 8 08FM-1.0BP-TF 08FM-1.0SP-1.9-TF 7.0 10.0 9.1 1,000 2,500 10FM-1.0BP-TF-A 10FM-1.0SP-1.9-TF 9.0 12.0 11.1 1,000 2,000 12FM-1.0SP-1.9-TF 11.0 14.0 13.1 - 2,000 10 12 - Material and Finish (Through-hole type) Contact: Phosphor bronze, copper-undercoated, tin-plated (reflow treatment) Housing: PBT, UL94V-0 (SMT type) Contact: Phosphor bronze, copper-undercoated, tin-plated (reflow treatment) Housing: PPS, UL94V-0 RoHS compliance This product displays (LF)(SN) on a label. 2 Top entry type Side entry type FM CONNECTOR Lead section dimensions of FFC and FPC ------------------------------------- (FPC) (FFC) 1.0x(N+1)0.12 1.00.15 0.70.1 1.00.15 0.33 +0.02 -0.03 R0.3 1.00.1 1.0x(N-1)0.1 1.00.15 0.33 +0.02 -0.03 0.70.1 7.5 Conductor 3.0min. 3.0min. 1.00.05 1.0x(N-1)0.1 10.0 1.00.15 1.0x(N+1)0.12 Conductor Reinforcing layer Film cover layer Reinforcing layer Base layer Note: N --- Number of circuits PC board layout and Assembly layout ---------------------------------------- Top entry type (Through-hole type) (viewed from soldering side) 2.00.05 (SMT type) (viewed from component side) 2.0min. 1.5min. 3.0 (SMT type) (viewed from component side) 2.0min. 1.5min. 1.00.05 1.00.05 Circuit No.1 0.60.05 3.0 4.4 3.6 1.2 3.0 1.9 3.0 2.00.15 5.0min. 4.4 0.75 3.0 3.0 Side entry type (Through-hole type) (viewed from soldering side) 2.00.05 2.0 2.9 Circuit No.1 2.00.05 4.4 0.750.05 0.60.05 4.4 1.00.05 0.9min. 1.00.05 Note: 1. Tolerances are non-cumulative: 0.05mm for all centers. 2. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. 3. It is recommended that surface mount connectors be secured using thermosetting resin or something similar. Contact JST for details. 3