MD2310FX High voltage NPN power transistor for standard definition CRT display Features State-of-the-art technology: - diffused collector "enhanced generation" Stable performance versus operating temperature variation Low base drive requirement Tight hFE range at operating collector current Fully insulated power package U.L. compliant 3 1 TO-3PF Application 2 Horizontal deflection output for monitor and real flat TV Figure 1. Internal schematic diagram Description The MD2310FX is manufactured using planar technology with diffused collector adopting new and enhanced high voltage structure. The MD product series show improved silicon efficiency bringing updated performance to the horizontal deflection stage. Table 1. Device summary Order code Marking Package Packing MD2310FX MD2310FX TO-3PF Tube October 2009 Doc ID 11801 Rev 5 1/10 www.st.com 10 Electrical ratings MD2310FX 1 Electrical ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit VCES Collector-emitter voltage (VBE = 0) 1500 V VCEO Collector-emitter voltage (IB = 0) 700 V VEBO Emitter-base voltage (IC = 0) 9 V Collector current 14 A Collector peak current (tP < 5 ms) 21 A Base current 7 A PTOT Total dissipation at Tc = 25 C 62 W VINS Insulation withstand voltage (RMS) from all three leads to external heatsink 2500 V TSTG Storage temperature IC ICM IB TJ Table 3. Symbol RthJC 2/10 -65 to 150 C Max. operating junction temperature 150 Thermal data Parameter Thermal resistance junction-case ____________________Max Doc ID 11801 Rev 5 Value Unit 2 C/W MD2310FX 2 Electrical characteristics Electrical characteristics TCASE = 25 C; unless otherwise specified. Table 4. Symbol Electrical characteristics Parameter Test conditions Min. Typ. Max. Unit 0.2 2 mA mA 1 mA ICES Collector cut-off current (VBE = 0) VCE = 1500 V VCE = 1500 V IEBO Emitter cut-off current (IC = 0) VEB = 9 V VCEO(sus) Collector-emitter sustaining voltage (IB = 0) IC = 100 mA VCE(sat)(1) Collector-emitter saturation voltage IC = 7 A IB = 1.75 A 2.5 V IC = 7 A IB = 1.75 A 1.1 V IC = 1 A IC = 7 A IC = 7 A VCE = 5 V VCE = 1 V VCE = 5 V VBE(sat)(1) Base-emitter saturation voltage hFE(1) ts tf DC current gain INDUCTIVE LOAD Storage time Fall time Tc= 125 C 700 IC = 6 A ___ _ _ fh = 64 kHz IB(on) = 0.9 A__ VBE(off) = - 2.7 V LBB(off) = 1.6 H V 28 5.5 6 8.5 2.3 0.12 2.8 0.25 s s 1. Pulse test: pulse duration 300 s, duty cycle 2 %. Doc ID 11801 Rev 5 3/10 Electrical characteristics 2.1 4/10 MD2310FX Typical characteristics Figure 2. Safe operating area Figure 3. Derating curve Figure 4. Output characteristics Figure 5. Reverse biased SOA Figure 6. DC current gain (VCE = 1 V) Figure 7. DC current gain (VCE = 5 V) Doc ID 11801 Rev 5 MD2310FX Electrical characteristics Figure 8. Collector-emitter saturation voltage Figure 10. Power losses Figure 9. Base-emitter saturation voltage Figure 11. Inductive load switching time Doc ID 11801 Rev 5 5/10 Test circuits 3 MD2310FX Test circuits Figure 12. Power losses and inductive load switching test circuit Figure 13. Reverse biased safe operating area test circuit 6/10 Doc ID 11801 Rev 5 MD2310FX 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. Doc ID 11801 Rev 5 7/10 Package mechanical data MD2310FX TO-3PF mechanical data DIM. A C D D1 E F F2 G G1 H L L2 L3 L4 L5 L6 L7 N R Dia mm. typ min. 5.30 2.80 3.10 1.80 0.80 0.65 1.80 10.30 max. 5.70 3.20 3.50 2.20 1.10 0.95 2.20 11.50 5.45 15.30 9.80 22.80 26.30 43.20 4.30 24.30 14.60 1.80 3.80 3.40 10 15.70 10.20 23.20 26.70 44.40 4.70 24.70 15 2.20 4.20 3.80 7627132_C 8/10 Doc ID 11801 Rev 5 MD2310FX 5 Revision history Revision history Table 5. Document revision history Date Revision Changes 18-Oct-2005 1 First release 25-Nov-2005 2 Complete datasheet 15-Dec-2005 3 Legal page inserted 29-Sep-2006 4 New hFE limit 27-Oct-2009 5 Updated TO-3PF package mechanical data Doc ID 11801 Rev 5 9/10 MD2310FX Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2009 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 10/10 Doc ID 11801 Rev 5