Product Overview PolyZen CE (Consumer Electronics) Series The PolyZen CE Series is an integrated overvoltage and overcurrent protection device with a slim profile suited for todays thin mobile devices like tablets and ultrabooks. TE Connectivity PolyZen CE Series The new PolyZen CE (Consumer Electronics) series of circuit protection devices for tablet PCs and other portable consumer electronics is a new extension to the family. Consumer electronics require robust circuit protection to help protect sensitive electronics from overvoltage and overcurrent events that can result in costly product returns and warranty issues. The low-profile (1.0 mm-height) PolyZen CE device, rated at an industry-leading 2.6A, is an innovative solution that offers significant performance advantages over discrete solutions employing fuses, Zeners and other passive devices. The PolyZen CE series offers board designers plug-and-play overvoltage protection devices that relieve them of the time it takes to integrate and test less effective discrete and more costly IC solutions. The PolyZen CE products integrate a precision Zener diode with 5.6V and 13.2V zener voltage (Vz) options and a PolySwitch PPTC (Polymer Positive Temperature Coefficient) device in a single, surface mount assembly. Offered in a compact thin package useful for space constrained applications, the PolyZen CE series uses a thermally protected KEY FEATURES Zener diode to help shield downstream electronics against voltage transients, reversebias and the incorrect use of power supplies. The PolySwitch PPTC element shuts out *Integrated overvoltage and overcurrent protection excessive current while the fault condition remains and helps protect the Zener diode and downstream electronics from damage. *High hold current rating *Plug and play with +5V and +12V Zener voltage option *Low 1.0mm height profile *Single component placement APPLICATIONS * Tablet PCs and Ultra-books * Global Positioning and Navigation Systems * HDDs, SSDs, and Personal Storage * Cigarette Lighter Adaptor Chargers * Cell phone charger port and USB power * Set Top Boxes and Media Players * Automotive Infotainment power * DC power port protection * Industrial handhelds and POS devices BENEFITS * High hold current rating up to 2.6A @ 20C meets Tablet PC requirement * Low profile for thin form factor consumer electronics * Fast clamping Zener diode helps to protect downstream electronics * Integrated plug-and-play device to reduce design and test time * Single component placement for space constrained applications * Protects electronics against reverse polarity power sources * Minimal power dissipation helps to meet total system power budget * RoHS Compliant and Halogen Free te.com TE Connectivity PolyZen CE Series TYPICAL APPLICATION BLOCK DIAGRAM Power Supply PolyZen Protected Electronics (External or internal) GND 2 VIN PolyZen Device 1 + 3 VOUT RLOAD Regulated Output Protected downstream electronics ELECTRICAL CHARACTERISTICS VZ (V) IHOLD (1) (A) IZt (A) @20C Leakage Current RTyp () R1Max () (2) Test Max @60C Voltage Current (V) (mA) VINT MAX (4) (V) (3) Test VINT MAX Current (V) (A) Test Voltage (V) Power (W) Test Voltage (V) 5 +3 -40 +16 -12 1 16 16 5 +5 -40 +16 -12 1 16 16 5 +3 -40 +16 -12 1 16 +16 -12 1 16 Typ. Max. ZEN132V260A16CE 13.20 13.40 13.65 0.1 2.6 2.0 13.15 5.0 0.032 0.045 16 ZEN056V260A16CE 5.45 5.60 5.75 0.1 2.6 2.0 5.25 10.0 0.032 0.045 ZEN132V230A16CE 13.20 13.40 13.65 0.1 13.15 5.0 0.032 0.060 2.3 @ 20C Tripped Power Dissipation (6) IFLT MAX (A) Min. Part Description IFLT MAX (5) ZEN056V230A16CE 5.45 5.60 5.75 0.1 2.3 @ 20C 5.25 10.0 0.032 0.060 16 5 +5 -40 ZEN132V130A24CE 13.20 13.40 13.65 0.1 1.3 @ 20C 13.15 5.0 0.070 0.105 24 3 +3 -40 +24 -16 1 24 ZEN056V130A24CE 5.45 5.60 5.75 0.1 1.3 @ 20C 5.25 10.0 0.070 0.105 24 3 +10 -40 +24 -16 1 24 Electrical characteristics determined at 25C unless otherwise specified. (1) IHOLD: Maximum steady state input current that will not generate a trip event. (2)RTyp: Resistance between VIN and VOUT pins during normal operation at room temperature. (3)R1MAX: The maximum resistance between VIN and VOUT pins. (4)VINT MAX: VINT MAX is defined as the voltage at which typical devices survived at least 100 trip cycles and 24 hours trip endurance at the specified voltage and current. (5)IFLT MAX: Maximum RMS fault current the diode can withstand and remain resettable. (6)The power dissipated by the device when in the "tripped" state. TYPICAL FAULT RESPONSES 20 16 14 14 12 12 10 10 8 8 6 6 4 4 2 2 0 0.00 0 0.00 0.05 VIN VOUT IFLT 0.05 0.10 0.10 0.15 0.15 0.20 Time (sec) Time (sec) te.com VIN IFLT 0.25 0.30 0.30 15 10 VIN VIN VOUT VOUT 20 20 VOUT 0.20 0.25 25 V (V) or I (A) 16 Fault Response: ZEN132V130A24CE TypicalTypical Fault Response: ZEN132V130A24CE / 3A Current Limited (IOUT=0) 24V / 24V 3A Current Limited SourceSource (IOUT=0) 25 V (V) or I (A) 18 18 V (V) or I (A) V (V) or I (A) 20 Fault Response: ZEN056V260A16CE TypicalTypical Fault Response: ZEN056V260A16CE 16VCurrent / 5A Current Limited (IOUT=0) 16V / 5A Limited SourceSource (IOUT=0) 15 10 5 5 0 0.00 0 0.00 IFLT 0.05 0.05 0.10 0.10 0.15 Time (sec) Time (sec) IFLT 0.15 0.20 0.20 TE Connectivity PolyZen CE Series GENERAL CHARACTERISTICS FOR POLYZEN DEVICES Operating temperature range -40 to +85C Storage temperature -40 to +85C ESD withstand 15kV Contact Discharge IEC61000-4-2, Level 4 Diode capacitance 4200pF Typical @ 1MHz, 1VRMS Construction RoHS compliant and Halogen Free DEVICE INFORMATION Pin Configuration and Block Diagram 2-0.50+/-0.05 GND GND = Ground VOUT VOUT = Zener regulated voltage output 3.80+/-0.05 Zener Diode 3.00+/-0.015 VIN VIN = Protected input to Zener diode 1.81+/-0.015 3 VOUT VIN Polymer PTC 2-0.80+/-0.015 2 3 0.72+/-0.015 3.00+/-0.05 1 1 VIN Pin 1.12+/-0.05 Name Pin Function 2-1.20+/-0.05 Pin Number 2.21+/-0.05 2 GND 2-0.40+/-0.015 VOUT GND 3.80+/-0.015 Mechanical Dimension and Recommended Pad Layout Recommended Pad Layout L 2-0.50+/-0.05 0.72+/-0 3 VOUT 3.80+/-0.05 H Recommended Solder Stencil (mm) (mm) Min 2-0.50+/-0.05 2-0.40+/-0.015 Max W 3.8 4.0 4.2 Height H 0.8 1.0 1.2 Dimension A 3 0.7 VOUT 0.8 0.9 5.2 3.80+/-0.05 0.72+/-0.015 3.80+/-0.015 Solder thinkness - 0.15mm te.com 3.00+/-0.015 Width 1.12+/-0.05 2-0.80+/-0.015 5.0 1.81+/-0.015 2 GND4.8 3.00+/-0.05 L 2-1.20+/-0.05 Length 2.21+/-0.05 1 VIN Typical 1.81+/-0.015 3.00+/-0.05 2-1.20+/-0.05 1 VIN W 1.12+/-0.05 2.21+/-0.05 2 GND A 2-0.40 3.80+ TE Connectivity PolyZen CE Series RECOMMENDED REFLOW PROFILE Classification Reflow Profiles Pb-Free Assembly Average Ramp-up Rate (TsMAX to Tp) 3C/second max Average Ramp-down Rate (Tp to TL) 6C/second max Preheat * Temperature Min (TsMIN) 150C * Temperature Max (TsMAX) 200C * Time (ts Preheat) 60-180 seconds Critical Zone TL to Tp Tp Ramp-up Ramp-down TL Temperature (T) Profile Feature TsMAX TsMIN Time maintained above: * Temperature (TL) 217C * Time (tL) 60-150 seconds tL ts Preheat t 25C to Peak Peak / Classification Temperature * Temperature (Tp) tp Time (t) 260C Time within 5C of actual peak * Time (tp) 20-40 seconds Time 25C to peak Temperature 8 minutes max PART NUMBERING SYSTEM ZEN 056V 260A 16 CE Special Labeling CE = PolyZen CE Series VINT MAX Rating 16 = 16V PPTC Hold Current Group 260 = 2.6A Zener Voltage Group 056 = 5.6V PolyZen Product Family DEVICE MARKING INFORMATION VVVII #### VVVII Zener Voltage Hold Current Part Description 05613 5.6V 1.3A ZEN056V130A24CE 05623 5.6V 2.3A ZEN056V230A16CE 05626 5.6V 2.6A ZEN056V260A16CE 13213 13.2V 1.3A ZEN132V130A24CE 13223 13.2V 2.3A ZEN132V230A16CE 13226 13.2V 2.6A ZEN132V260A16CE #### te.com Last 4 digits of batch number TE Connectivity PolyZen CE Series TAPE AND REEL 10 DIMENSION pitches cumulative tolerance on tape 0.2mm. K D P0 P2 E 10 pitches cumulative 10 pitches cumulative tolerance on tape 0.2mm. tolerance on tape 0.2mm. F Max. 5 B0K K D D P2 W P0 P2P0 E E 0 t A0 Max. 5 Max. 5 B1 B1 D1 P F F B0 User B0 Direction of Feed K0 K0 t t W A0 A0 P P D1 W D1 User Direction of Feed User Direction of Feed 100mm 100mm 100mm Dimension (mm) D0 1.55 + 0.1 - 0.0 E1 1.75 0.1 P0 4.0 0.1 T max 0.35 B1 max 6.2 D1 min 1.5 F 5.5 0.05 K1 max 1.7 P2 2.0 0.05 W 12.0 0.3 P1 8.0 0.1 A0 4.3 0.05 B0 5.3 0.05 K0 1.3 0.05 Note: 1. Materials: Conductive PS. 2. All dimensions meet EIA-481-D. Allowable Camber to be 1mm/100mm Noncumulative Over 250mm 1mm Max. Symbol Allowable Camber to be 1mm/100mm Allowable Camber to be 1mm/100mm Noncumulative Over 250mm Noncumulative Over 250mm 1mm Max. 1mm Max. 1mm Max. 1mm Max. 1mm Max. Matte Finish These Area Lock Feature (6 places) Lock Feature (6 places) Lock Feature (6 places) Amax 330.0 Nmin These Area Matte Finish Matte Finish These Area +0.25 -4.00 102.0 Ref A Amaxmax +0.25 330.0+0.25 -4.00 330.0 -4.00 See "Detail A" N Nmin min Symbol Dimension (mm) Amax 330 Nmin 102 W1 8.4 W2 11.1 102.0 Ref 102.0 Ref W1 (measured at hub) W2 (measured at hub) o20.2 Min See "Detail A" See "Detail A" o13.0 +0.5 -0.2 2.0 +/- 0.5 o20.2 Min o20.2 Min Detail A o13.0 +0.5 -0.2 o13.0 +0.5 -0.2 2.0 +/- 0.5 2.0 +/- 0.5 Detail A Detail A te.com W1 (measured at hub) at hub) W1 (measured W2 (measured at hub) W2 (measured at hub) TE Connectivity PolyZen CE Series POLYZEN PRODUCT FAMILY PACKAGE QUANTITY Reel Quantity Standard Box Quantity 4,000 20,000 MATERIAL INFORMATION RoHS Compliant ELV Compliant Halogen Free* Directive 2002/95/EC Compliant Directive 2000/53/EC Compliant HF * Halogen Free refers to: Br900ppm, Cl900ppm, Br+Cl1500ppm. te.com FOR MORE INFORMATION TE Circuit Protection 308 Constitution Drive Menlo Park, CA USA 94025-1164 Tel : (800) 227-7040, (650) 361-6900 Fax : (650) 361-4600 www.circuitprotection.com www.circuitprotection.com.hk (Chinese) www.te.com/japan/bu/circuitprotection/ (Japanese) Brazil Tel : 55-11-2103-6090 Fax : 55-11-2103-6216 Japan Tel : 81-44-900-5110 Fax : 81-44-900-5140 China, Beijing Tel : 86-10-6569-3488 x 16526 Fax : 86-10-6569-3206 Singapore / Indonesia Thailand / Malaysia / Vietnam Tel : 60-4-8102112 Mobile : 60-194725628 Fax : 60-4-6433288 UK / Eire / Benelux / Israel / Korea China, Shanghai South Africa / Nordic / Baltic / Others Tel : 82-2-3415-4654 Tel : 86-21-6106-7379 Tel : 49-89-6089485 Fax : 82-2-3486-1786 Fax : 86-21-6485-3255 India Fax : 49-89-6089394 Tel : 91-80-4161-3745 Taiwan China, Shenzhen / Guangzhou Mobile : 91-99-0248-8886 Germany / Austria / Switzerland / Tel : 886-2-8768-2788 x 211 Tel : 86-755-2515-4797 Eastern Europe / Russia Fax : 886-2-8768-1277 Fax : 86-755-2598-0419 Tel : 49-89-6089584 Fax : 49-89-6089394 China, Hong Kong Australia / Philippines Tel : 852-2738-8181 Tel : 63-2-988-9465 France/ Italy / Iberia / Fax : 852-2735-1185 Fax : 63-2-848-0205 Greece / Turkey Tel : 33-1-34208455 Part numbers in this brochure are RoHS Compliant*, unless marked otherwise. *as defined www.te.com/leadfree Fax : 33-1-34208479 te.com (c) 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. RCP0138E 08/2012 PolyZen, TE Connectivity and TE connectivity (logo) are trademarks. Other logos, product and/or company names might be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this brochure, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.