1. Product profile
1.1 General description
Ultra low capacitance bidirectional ElectroStatic Discharge (ESD) protection diode
designed to protect one signal line fro m the damage cause d by ESD and othe r transient s.
The device is housed in a SOD8 82D leadless ultr a small Su rface-Mounted Device (SMD)
plastic package with visible and solderable side pads.
1.2 Features and benefits
1.3 Applications
1.4 Quick reference data
2. Pinning information
[1] The marking bar indicates pin 1.
PESD5V0U1BLD
Ultra low capacitance bidirectional ESD protection diode
Rev. 2 — 27 July 2011 Product data sheet
Bidirectional ESD protection of one line AEC-Q101 qualified
Ultra small SMD plastic package ESD protection up to 10 kV
Solderable side pads IEC 61000-4-2; level 4 (ESD)
Package height typ. 0.37 mm Ultra low leakage current: IRM =5nA
Ultra low diode capacitance Cd=2.9pF
Computers and peripherals High-speed data lines
Audio and video equipment Communication systems
Cellular handsets and accessories Portable electronics
Table 1. Quick reference data
Symbol Parameter Conditions Min Typ Max Unit
VRWM reverse standoff voltage - - 5 V
Cddiode capacitance f = 1 MHz; VR=0V - 2.9 3.5 pF
Table 2. Pinning
Pin Description Simplified outline Graphic symbol
1 cathode (diode 1) [1]
2 cathode (diode 2)
Transparent
top view
21
sym045
21
© Nexperia B.V. 2017. All rights reserved
PESD5V0U1BLD All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 27 July 2011 2 of 11
Nexperia PESD5V0U1BLD
Ultra low capacitance bidirectional ESD protection diode
3. Ordering information
4. Marking
[1] For SOD882D binary marking code description, see Figure 1.
4.1 Binary marking code description
5. Limiting values
Tabl e 3. Ordering i nfo rmation
Type number Package
Name Description Version
PESD5V0U1BLD - leadless ultra small plastic package; 2 terminals;
body 1 0.6 0.4 mm SOD882D
Table 4. Marking codes
Type number Marking code[1]
PESD5V0U1BLD 0001 0000
Fig 1. SOD882D binary marking code description
VENDOR CODE
MARKING CODE
(EXAMPLE)
CATHODE BAR READING DIRECTION
READING DIRECTION
READING EXAMPLE:
0111
1011
006aac477
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
Tjjunction temperature - 150 C
Tamb ambient temperature 55 +150 C
Tstg storage temperature 65 +150 C
© Nexperia B.V. 2017. All rights reserved
PESD5V0U1BLD All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 27 July 2011 3 of 11
Nexperia PESD5V0U1BLD
Ultra low capacitance bidirectional ESD protection diode
[1] Device stressed with ten non-repetitive ESD pulses.
[2] Measured from pin 1 to 2.
Table 6. ESD maximum ratings
Tamb =25
C unless otherwise specified.
Symbol Parameter Conditions Min Max Unit
VESD electrostatic
discharge voltage IEC 61000-4-2
(contact discharge) [1][2] -10kV
machine model - 400 V
MIL-STD-883
(human body model) [2] -10kV
Table 7. ESD standards compliance
Standard Conditions
IEC 61000-4-2; level 4 (ESD) > 15 kV (ai r); > 8 kV (contact)
MIL-STD-883; class 3 (human body model) > 4 kV
Fig 2. 8 /20 s pulse waveform according to
IEC 61000-4-5 Fig 3. ESD pulse waveform according to
IEC 61000-4-2
t (μs)
0403010 20
001aaa630
40
80
120
IPP
(%)
0
e−t
100 % IPP; 8 μs
50 % IPP; 20 μs
001aaa631
I
PP
100 %
90 %
t
30 ns 60 ns
10 %
t
r
= 0.7 ns to 1 ns
© Nexperia B.V. 2017. All rights reserved
PESD5V0U1BLD All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 27 July 2011 4 of 11
Nexperia PESD5V0U1BLD
Ultra low capacitance bidirectional ESD protection diode
6. Characteristics
[1] Non-repetitive current pulse, Transmission Line Pulse (TLP) tp= 100 ns; square pulse;
ANS/IESD STM5-1-2008.
Table 8. Characteristics
Tamb =25
C unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
VRWM reverse standoff
voltage --5V
IRM reverse leakage current VRWM = 5 V - 5 100 nA
VBR breakdown voltage IR=5mA 5.57 9.5V
Cddiode capacitance f = 1 MHz; VR=0V - 2.9 3.5 pF
rdyn dynamic resistance IR=10A [1] -0.8-
f=1MHz; T
amb =25C
Fig 4. Diode capacitance as a function of reverse
voltage; typical values Fig 5. V-I characteristics for a bidirectio nal
ESD pr otection diode
VR (V)
054231
006aab036
2.2
2.6
3.0
Cd
(pF)
1.8
006aaa676
−V
CL
−V
BR
−V
RWM
V
CL
V
BR
V
RWM
−I
RM
I
RM
−I
R
I
R
−I
PP
I
PP
−+
© Nexperia B.V. 2017. All rights reserved
PESD5V0U1BLD All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 27 July 2011 5 of 11
Nexperia PESD5V0U1BLD
Ultra low capacitance bidirectional ESD protection diode
Fig 6. ESD clamping test setup and waveforms
006aab037
50 Ω
RZ
CZ
DUT
(DEVICE
UNDER
TEST)
GND
GND
450 Ω
RG 223/U
50 Ω coax
ESD TESTER
IEC 61000-4-2 network
CZ = 150 pF; RZ = 330 Ω
4 GHz DIGITAL
OSCILLOSCOPE
10×
ATTENUATOR
GND
GND
unclamped +8 kV ESD pulse waveform
(IEC 61000-4-2 network) clamped +8 kV ESD pulse waveform
(IEC 61000-4-2 network) pin 1 to 2
unclamped −8 kV ESD pulse waveform
(IEC 61000-4-2 network) clamped −8 kV ESD pulse waveform
(IEC 61000-4-2 network) pin 1 to 2
vertical scale = 10 A/div
horizontal scale = 15 ns/div
vertical scale = 10 A/div
horizontal scale = 15 ns/div vertical scale = 10 V/div
horizontal scale = 100 ns/div
vertical scale = 10 V/div
horizontal scale = 100 ns/div
© Nexperia B.V. 2017. All rights reserved
PESD5V0U1BLD All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 27 July 2011 6 of 11
Nexperia PESD5V0U1BLD
Ultra low capacitance bidirectional ESD protection diode
7. Application information
The PESD5V0U1BLD is designed for the protection of one bidire ctional data or signal line
from the damage caused by ESD and surge pulses. The device may be used on lines
where the signal polarities are both, positive and negative with respect to ground.
Circuit board layout and protection device placement
Circuit board layout is critical for the suppression of ESD, Electrical Fast Transient (EFT)
and surge transients. The following guidelines are recommended:
1. Place the PESD5V0U1BLD as close to the input terminal or connector as possible.
2. The path length between the PESD5V0U1BLD and the protected line should be
minimized.
3. Keep parallel signal paths to a minimum.
4. Avoid running protected conductors in parallel with unprotected conductors.
5. Minimize all Printed-Circuit Board (PCB) conductive loops including power and
ground loops.
6. Minimize the length of the transient return path to ground.
7. Avoid using shared transient return paths to a common ground point.
8. Ground planes should be used whenever possible. For multilayer PCBs, use ground
vias.
8. Test information
8.1 Quality information
This product has been qualified in accordance with the Automotive Electronics Council
(AEC) standard Q101 - Stress test qualification for discrete semiconductors, and is
suitable for use in automotive applications.
Fig 7. Applicat i on diagram
006aac636
PESD5V0U1BLD
GND
signal line
© Nexperia B.V. 2017. All rights reserved
PESD5V0U1BLD All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 27 July 2011 7 of 11
Nexperia PESD5V0U1BLD
Ultra low capacitance bidirectional ESD protection diode
9. Package outline
10. Packing information
[1] For further information and the availability of packing methods, see Section 14.
11. Soldering
Fig 8. Package outline SOD882D
10-08-06Dimensions in mm
0.65
0.30
0.22
0.30
0.22
0.55
0.45
0.65
0.55 0.4
max
1.05
0.95
2
cathode marking on top side
1
Table 9. Packing methods
The indicated -xxx are the last thre e digits of the 12NC ordering code.[1]
Type number Package Description Packing quantity
10000
PESD5V0U1BLD SOD882D 2 mm pitch, 8 mm tape and reel -315
Reflow soldering is the only recommended soldering method.
Fig 9. Reflow soldering footprint SOD882D
© Nexperia B.V. 2017. All rights reserved
PESD5V0U1BLD All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 27 July 2011 8 of 11
Nexperia PESD5V0U1BLD
Ultra low capacitance bidirectional ESD protection diode
12. Revision history
Table 10. Revision history
Document ID Release date Data sheet status Change notice Supersedes
PESD5V0U1BLD v.2 20110727 Product data sheet - PESD5V0U1BLD v.1
Modifications: •Section 2 “Pinning informa tion” is corrected.
PESD5V0U1BLD v.1 20110504 Product data sheet - -
© Nexperia B.V. 2017. All rights reserved
PESD5V0U1BLD All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 27 July 2011 9 of 11
Nexperia PESD5V0U1BLD
Ultra low capacitance bidirectional ESD protection diode
13. Legal information
13.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of de vice(s) descr ibed in th is docume nt may have cha nged since this docume nt was publis hed and ma y dif fer in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nexperia.com.
13.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Nexperia does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liab ility for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and tit le. A short data sh eet is intended
for quick reference only and shou ld not be rel ied u pon to cont ain det ailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local Nexperia sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall pre vail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Nexperia and its customer, unless Nexperia and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the Nexperia product is
deemed to off er functions an d qualities beyond those described in the
Product data sheet.
13.3 Disclaimers
Limited warr a nty and liability — Information in this documen t is believed to
be accurate and reliable. However, Nexperia does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information.
In no event shall Nexperia be liable for any indirect, incidental,
punitive, special or consequ ential damages (including - wit hout limitatio n - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Nexperia’s aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of Nexperia.
Right to make changes — Nexperia reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all informa tion supplied prior
to the publication hereof .
Suitability for use — Nexperia products are not designed,
authorized or warranted to be suit able fo r use in li fe support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of a Nexperia product can reasonably be expected
to result in perso nal injury, death or severe propert y or environmental
damage. Nexperia accepts no liability for inclusion and/or use of
Nexperia products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Nexperia makes no
representation or warranty tha t such application s will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and ope ration of their applications
and products using Nexperia products, and Nexperia
accepts no liability for any assistance with applicati ons or customer product
design. It is customer’s sole responsibility to determine whether the Nexperia
product is suitable and fit for the customer’s applications and
products planned, as well as fo r the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
Nexperia does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using Nexperia
products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). Nexperia does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanent ly and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — Nexperia
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nexperia.com/profile/terms, unless otherwise
agreed in a valid written individua l agreement. In case an individual
agreement is concluded only the ter ms and conditions of the respective
agreement shall apply. Nexperia hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of Nexperia products by customer.
No offer to sell or license — Nothing i n this document may be interpreted or
construed as an of fer t o sell product s that is open for accept ance or t he grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulatio ns. Export might require a prior
authorization from national authorities.
Document status[1][2] Product status[3] Definition
Objective [short] data sheet Development This document contains data from the objective specification for product development.
Preliminary [short] dat a sheet Qualification This document contains data from the preliminary specification.
Product [short] dat a sheet Production This document cont ains the product specification.
© Nexperia B.V. 2017. All rights reserved
PESD5V0U1BLD All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 27 July 2011 10 of 11
Nexperia PESD5V0U1BLD
Ultra low capacitance bidirectional ESD protection diode
Quick reference data — Th e Quick reference data is an extract of th e
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
13.4 Trademarks
Notice: All referenced b rands, produc t names, service names and trademarks
are the property of their respect i ve ow ners.
14. Contact information
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Nexperia PESD5V0U1BLD
Ultra low capacitance bidirectional ESD protection diode
15. Contents
1 Product profile. . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 General description . . . . . . . . . . . . . . . . . . . . . 1
1.2 Features and benefits. . . . . . . . . . . . . . . . . . . . 1
1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.4 Quick reference data . . . . . . . . . . . . . . . . . . . . 1
2 Pinning information. . . . . . . . . . . . . . . . . . . . . . 1
3 Ordering information. . . . . . . . . . . . . . . . . . . . . 2
4 Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
4.1 Binary marking code description. . . . . . . . . . . . 2
5 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2
6 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 4
7 Application information. . . . . . . . . . . . . . . . . . . 6
8 Test information. . . . . . . . . . . . . . . . . . . . . . . . . 6
8.1 Quality information . . . . . . . . . . . . . . . . . . . . . . 6
9 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 7
10 Packing information . . . . . . . . . . . . . . . . . . . . . 7
11 Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
12 Revision history. . . . . . . . . . . . . . . . . . . . . . . . . 8
13 Legal information. . . . . . . . . . . . . . . . . . . . . . . . 9
13.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 9
13.2 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
13.3 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
13.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 10
14 Contact information. . . . . . . . . . . . . . . . . . . . . 10
15 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
© Nexperia B.V. 2017. All rights reserved
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release:
27 July 2011