3MTM Twin Axial Cable SL8800 Series 30 AWG 100 ohm Internal Cable *Example Construction above - see drawings for specific constructions and product dimensions Physical Description Signal Pair Construction Wire ......................... 30 AWG Solid Copper - Silver or Tin Plated Insulation .................... Solid Polyolefin (natural color) Wire/Insulated Diameter ... 0.25/0.79 mm Auxiliary Signal Lines (if included) Ground Wire Primary Shield Wire ......................... 30 AWG Solid Copper Tin Plated Insulation .................... Solid Polyolefin (natural color) Wire/Insulated Diameter ... 0.25/0.56 mm ....................................... ....................................... 30 AWG Solid Copper Tin Plated or 32 AWG Stranded 7/40 Copper Tin Plated Aluminum/Polyester at 0.022 mm total thickness Aluminum In Longitudinal Construction 100% Coverage Approvals and Compliance ........................... UL AWM Style 21008 File E42769 -20C to 80C 150V Horizontal Flame RoHS Compliant (see back) Halogen Free (see back) Cable Marking ........................................ Example 3M (Part Number) 30 AWG (Signal Plating) (Lot) 3M SL8801/12-10DA5-00 30 AWG Silver TW602-1 Electrical Properties (Signal Pairs) Impedance ....................................... 100 +/- 5 ohms Capacitance ....................................... 50 pF/m (Typical) Propagation Delay ..................................... 4.95 ns/m (Typical) Intrapair Skew (TDT 3m).............................. <10 ps/m Withstanding Voltage ............................ 1500 V Insulation Resistance ............................ 1000 Megohms Conductor Resistance (max) Attenuation (typical) ....................... ............................ Frequency (GHz) Tin Plating (dB/m) Silver Plating (dB/m) 0.5 -0.90 -0.85 370 /km Resonance-Free 1.0 -1.4 -1.2 2.0 -2.2 -1.7 5.0 -4.0 -3.2 10.0 -7.5 -4.9 15.0 -10.9 -6.8 20.0 -14.6 -8.8 Mechanical Properties Minimum Bend Radius 3 ............................. 1.0 mm (one-time fold) Document PS-0105 Revision Date : 9/29/11 Rev. A RoHS Compliance Statement "RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (including decaBDE); or (b) 0.01% (by weight) for cadmium. Halogen Free Compliance Statement Halogen-free is defined as both (1) no halogen compounds are intentionally added to the product or used in the manufacturing process for the product, and (2) any impurities present are less than 900 ppm bromine, less than 900 ppm chlorine, and/or less than 1500 ppm total bromine and chlorine. The latter are the levels set forth in certain industry standards for printed circuit boards, such as the International Electrotechnical Commission (IEC) 61249-2-21standard. Unless otherwise stated by 3M in writing, this information represents 3M's knowledge and belief based on information provided by third party suppliers to 3M. Important Notice Warranty; Limited Remedy; Limited Liability Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. 3M's product warranty is for one (1) year from the date of manufacture. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. 3 Document PS-0105 Revision Date : 9/29/11 Rev. A