PCI 9030 SMARTargetTM I/O Accelerator SMARTarget Technology Performance Features PCI v2.2 compliant 32-bit 33MHz Target Interface Chip enabling PCI Burst Transfers up to 132Mbytes/second. Up to 60MHz Local Bus operation enabling burst transfers up to 240Mbytes/second PCI Target Read Ahead Mode PCI Target Programmable Burst PCI Target Delayed Write Posted Memory Writes Flexibility Features Programmable 32-bit Local Bus operates up to 60MHz Supports 5 PCI to Local Address spaces Nine Programmable GPIOs Four programmable Chip selects CompactPCI Hot Swap Ready Big/Little Endian Conversion Interrupt Generator PCI v1.1 Power Management. 3.3V, 5V Tolerant PCI Signaling 3.3V CMOS device in 180-pin mBGA or 176-pin PQFP JTAG As PCI evolves in today's complex systems, PLX continues to provide market leading, high performance 32-bit PCI solutions. In this tradition, PLX is offering the PCI 9030 SMARTarget I/O Accelerator. There are many ways to do a PCI target design. Many PCI chip and core designs only attempt to implement the minimum PCI v2.1 bus interface signaling and call it complete. This leaves the burden of connectivity, performance and system compatibility on the designer. Only the PCI 9030 has SMARTarget technology, a set of advanced features which go far beyond the minimum to provide the best possible performance and flexibility to simplify the design. A basic target design is one thing, but a SMARTarget design is much more. The PCI 9030 brings PLX's industry leading experience in the world of PCI designs to you in a way that is simple and convenient to use. The PCI 9030 is the perfect solution for applications such as: Migrating Legacy Designs to PCI Whether you are migrating an ISA or other older design to PCI, or upgrading your current PCI target design, the PCI 9030 with SMARTarget technology provides the fastest and easiest route to PCI. The PCI 9030 has the industry's most flexible local bus which allows for multiple interface options to a wide variety of memory and I/O devices. Combine that with fully tested, compatible PCI v2.2 compliance, and your design risk is virtually zero. CompactPCI Hot Swap Designs Building upon PLX's experience in CompactPCI, the PCI 9030 is the industry's first CompactPCI Hot Swap Ready Target device. This allows all of your CompactPCI I/O board designs to be compatible with both traditional CompactPCI and the new Hot Swap system designs. Smaller Form Factor Designs The PCI 9030 offers a 180-pin mBGA packaging option. Where space is a consideration, this ultra-thin, dime-sized package is an ideal solution. This allows for flexibility in real estate sensitive designs such as PMC or PC-MIP Mezzanine cards, and PCMCIA PC-Cards. Actu al S ize PCI 9030 SMARTarget I/O Accelerator Only the PCI 9030 has SMARTarget technology, a set of advanced features which go far beyond the minimum to provide the best possible performance and flexibility to simplify the design. A basic target design is one thing, but a SMARTarget design is much more. PCI Target Programmable Burst. The PCI 9030 may be programmed for several burst lengths, including unlimited burst. This allows for maximum transfer rates on both the PCI and local bus. Posted Memory Writes. A PCI memory write can be posted to the PCI 9030 for later transfer to the Local bus. This allows for maximum PCI performance and avoids potential deadlock situations. PCI SMARTarget Flexibility Features Programmable Local Bus operates up to 60MHz and supports both nonmultiplexed and multiplexed 32-bit address/data protocol, and Dynamic Local Bus width control allowing slave accesses of 8-,16- or 32-bit devices. Target Delayed Write. The PCI 9030 supports PCI Target Delayed Write mode where the PCI Target Write data is postponed in the PCI Target Write FIFO to allow uninterrupted burst transactions Supports Memory I/O 5 PCI to Local Address spaces. These spaces (Space 0,1,2,3 and Expansion ROM Spaces) allow a PCI Bus Master to access the local memory spaces with individually programmable wait states, bus width, and burst capabilities. I/O 32-bit 60MHz Lo cal Bus I/O PCI 9030 SMARTargetTM Device The PCI 9030 has 9 programmable General Purpose I/Os which may be used for a variety of purposes. I/O Four programmable Chip selects eliminate decode logic. CompactPCI Hot Swap Ready Supports Automatic on-the-fly Big Endian and Little Endian conversion for all operations and data types. 32-bit, 33MHz Sy stem PCI Bus SMARTarget Performance Features: PCI v2.2 Compliant 32-bit, 33MHz Target Interface Chip enabling PCI Burst Transfers up to 132Mbytes/second. Up to 60MHz Local Bus operation enabling burst transfers up to 240Mbytes/second Target Read Ahead Mode. The PCI 9030 will prefetch a programmable amount of data from the local bus. The prefetched data can then be burst transferred on the PCI bus from the PCI 9030 internal PCI Target Read FIFO. The prefetch size can be programmed to match the PCI master burst length or can be used as PCI Target Read Ahead mode data. This feature allows for increased bandwidth and reduced read latency. Interrupt Generator can assert PCI interrupts from external and internal sources. Fully supports the Vital Product Data (VPD) PCI v2.2 extension including New Capabilities Structure. Provides an alternate access method for user or system defined parameters or configuration data. on the Local bus. This allows for a higher throughput for conditions in which the PCI clock frequency is slower than the Local clock frequency or when Local bus bursting is desirable. PCI I/O Memory 32-bit 60MHz Local I/O ENUM# Bus PCI 9030 TM SMARTarget Device I/O LED Figure 2. Typical CompactPCI Hot Swap Adapter Card act PCI Bus 32-bit, 33MHz Comp Figure 1. Typical PCI Target Adapter Card PCI Power Management supports both D0, D3hot and D3cold power states. 32-bit, 33MHz PCI Bus CompactPCI Hot Swap Adapter Card Hot Swap capability is a requirement for today's CompactPCI systems. The PCI 9030 provides an excellent solution because it is Memory I/O the industry's first Hot Swap Ready Target chip. SMARTarget Technology will ensure a high performance Hot Swap imple32-bit 60MHz Local Bus mentation. The PCI 9030 is a PCI 9030 PICMG v2.1 Hot Swap Ready SMARTargetTM target device including the Device (mBGA) following features: PCI specification v2.1 or better Tolerant of Vcc from early power Figure 3. PMC Card Tolerant of asynchronous reset Tolerant of precharge voltage 3.3V, 5V Tolerant PCI Signaling enables Has limited I/O pin leakage at universal PCI adapters precharge voltage 3.3V CMOS device in space saving 180 Incorporates the Hot Swap pin mBGA or 176-PQFP Control/Status Register (HS_CSR) PCI 9030 Applications Incorporates an Extended Capability PCI Target Adapter Card Pointer (ECP) mechanism The PCI 9030 can be used in a wide vari Incorporates added resources for softety of applications in networking, telecom, ware control of ENUM#, the ejector switch, and the status LED which imaging, industrial and storage. The PCI indicates to the user insertion /removal 9030 simplifies migration of legacy designs Precharge BIOS internal to the to PCI by providing a convenient off-thePCI 9030 shelf solution that can enable you to Early power support internal to the have your prototypes operational in as PCI 9030 little as one week. At the same time, the PCI 9030's built in SMARTarget perforFigure 2 shows a typical Compact PCI mance features guarantee you will meet Hot Swap adapter card. or beat your performance goals. In addiSmall Form Factor PCI Designs tion, SMARTarget flexibility features such In the real estate conscious world of as 3.3V and 5V tolerant I/O buffers and PMC, PC-MIP, and PCMCIA PC-Cards, local bus operation up to 60MHz, enable the PCI 9030's attractive packaging you to connect a wide variety of memory options are the perfect solution. and I/O devices. With SMARTarget in SMARTarget Flexibility features such as action, PCI Target Adapter designs have never been simpler. Figure 1 shows a typical PCI Target adapter card. GPIO's and Programmable Chip selects save additional valuable board space. The PCI 9030 enables a whole new generation of mini form factor PCI cards. This is shown in figure 3 and 4: Additional Features 5V Tolerant Operation- The PCI 9030 requires 3.3 Vcc. It provides 3.3V signaling with 5V I/O tolerance on the PCI and Local Buses. Serial EEPROM Interface-Contains an interface for an optional serial EEPROM that can be used to load configuration information. Clocks-The Local Bus runs from a local bus clock and asserts the necessary internal clocks. This clock runs asynchronously to the PCI clock. The PCI 9030 provides a PCI Buffered clock which can be used as a local bus clock if desired. I/O 32-bit 60MHz PCI 9030 Local Bus SMARTargetTM Device (mBGA) Memory Figure 4. PCMCIA PC-CARD Development Tool Support As any good designer knows, development tools are just as important as the chips themselves. That is why PLX provides a complete PCI development environment to speed your time to market. The PCI 9030 is supported with a complete Reference Design Kit (RDK) with software debug support, and a hardware development kit (HDK) CD-ROM. These tools provide the easiest PCI target prototyping platform available. With the PLX PCI development environment you can have your hardware and software prototypes running in as little as one week. 32-bit, 60MHz Local Bus Local Bus Interface Control Logic Serial EEPROM Controller PCI Configuration Register Dynamic Data Bus Width Control Logic Endian Control Logic Local Bus Control Logic Local Configuration Register PCI Bus Interface Control Logic Read FIFO Multiplexed/ Non Multiplexed Control Logic Write FIF0 FIFO Control Logic PCI Bus Hot Swap Control Logic Control Logic 32-bit, 33MHz PCI Bus PLX PCI 9030 Block Diagram Product Ordering Information Part Number PLX Technology, Inc. 390 Potrero Ave. Sunnyvale, CA 94085 USA Tel: 1-800-759-3735 Fax: 1-408-774-2169 Email: info@plxtech.com Web Site: www.plxtech.com Description PCI 9030-AA60PI PCI SMARTarget I/O Accelerator (PQFP) PCI 9030-AA60PI F PCI SMARTarget I/O Accelerator (PQFP) (Lead-Free) PCI 9030-AA60BI PCI SMARTarget I/O Accelerator ( BGA) PCI 9030-AA60BI F PCI SMARTarget I/O Accelerator ( BGA) (Lead-Free) PCI 9030RDK-LITE PCI 9030 Reference Design kit CompactPCI 9030RDK-LITE HDK Collection CD-ROM Host-SDK CompactPCI 9030 Reference Design Kit Hardware Development Kit Collection CD-ROM Windows Host Side Software Development Kit See PLX web site for latest version and product support information. CompactPCI (R) (c) 2001 by PLX Technology, Inc. All rights reserved. PLX and Data Pipe Architecture are trademarks of PLX Technology, Inc. All oth trademarks or registered trademarks of their respective companies. Information supplied by PLX is believed to be accurate and r Technology, Inc. reserves the right, without notice, to make changes in product design or specification. 9030-SIL-PB-P1-03 er product names that appear in this material are for identification purposes only and are acknowledged to be eliable, but PLX Technology, Inc. assumes no responsibility for any errors that may appear in this material. PLX 7/2000 5K