PCI9030-AA60PIF - PLX Technology, Inc.

PCI 9030

SMARTarget™ I/O Accelerator

As PCI evolves in today's complex systems, PLX continues to provide market

leading, high performance 32-bit PCI solutions. In this tradition, PLX is offering

the PCI 9030 SMARTarget I/O Accelerator.

There are many ways to do a PCI target design. Many PCI chip and core

designs only attempt to implement the minimum PCI v2.1 bus interface signaling

and call it complete. This leaves the burden of connectivity, performance and

system compatibility on the designer. Only the PCI 9030 has SMARTarget tech-

nology, a set of advanced features which go far beyond the minimum to pro-

vide the best possible performance and flexibility to simplify the design. A basic

target design is one thing, but a SMARTarget design is much more.

The PCI 9030 brings PLX's industry leading experience in the world of PCI

designs to you in a way that is simple and convenient to use. The PCI 9030 is

the perfect solution for applications such as:

Migrating Legacy Designs to PCI

Whether you are migrating an ISA or other older design to PCI, or upgrading

your current PCI target design, the PCI 9030 with SMARTarget technology pro-

vides the fastest and easiest route to PCI. The PCI 9030 has the industry's most

flexible local bus which allows for multiple interface options to a wide variety

of memory and I/O devices. Combine that with fully tested, compatible PCI v2.2

compliance, and your design risk is virtually zero.

CompactPCI Hot Swap Designs

Building upon PLX's experience in CompactPCI, the PCI 9030 is the industry's

first CompactPCI Hot Swap Ready Target device. This allows all of your

CompactPCI I/O board designs to be compatible with both traditional

CompactPCI and the new Hot Swap system designs.

Smaller Form Factor Designs

The PCI 9030 offers a 180-pin mBGA packaging option. Where space is a consid-

eration, this ultra-thin, dime-sized package is an ideal solution. This allows for

flexibility in real estate sensitive designs such as PMC or PC-MIP Mezzanine

cards, and PCMCIA PC-Cards.

SMARTarget Technology

Performance Features

■

PCI v2.2 compliant 32-bit

33MHz Target Interface Chip

enabling PCI Burst Transfers

up to 132Mbytes/second.

■

Up to 60MHz Local Bus oper-

ation enabling burst transfers

up to 240Mbytes/second

■

PCI Target Read Ahead Mode

■

PCI Target Programmable

Burst

■

PCI Target Delayed Write

■

Posted Memory Writes

Flexibility Features

■

Programmable 32-bit Local

Bus operates up to 60MHz

■

Supports 5 PCI to Local

Address spaces

■

Nine Programmable GPIOs

■

Four programmable

Chip selects

■

CompactPCI Hot Swap Ready

■

Big/Little Endian Conversion

■

Interrupt Generator

■

PCI v1.1 Power Management.

■

3.3V, 5V Tolerant PCI Signaling

■

3.3V CMOS device in 180-pin

mBGA or 176-pin PQFP

■

JTAG

Actual Size

■

Posted Memory Writes. A PCI memory

write can be posted to the PCI 9030 for

later transfer to the Local bus. This

allows for maximum PCI performance

and avoids potential deadlock situations.

SMARTarget Flexibility Features

■

Programmable Local Bus operates up

to 60MHz and supports both non-

multiplexed and multiplexed 32-bit

address/data protocol, and Dynamic

Local Bus width control allowing slave

accesses of 8-,16- or 32-bit devices.

■

Supports 5 PCI to Local Address

spaces. These spaces (Space 0,1,2,3 and

Expansion ROM Spaces) allow a PCI

Bus Master to access the local memory

spaces with individually programmable

wait states, bus width, and burst

capabilities.

■

The PCI 9030 has 9 programmable

General Purpose I/Os which may

be used for a variety of purposes.

■

Four programmable Chip

selects eliminate decode logic.

■

CompactPCI Hot Swap Ready

■

Supports Automatic on-the-fly Big

Endian and Little Endian conversion

for all operations and data types.

■

Interrupt Generator can assert PCI inter-

rupts from external and internal sources.

■

Fully supports the Vital Product Data

(VPD) PCI v2.2 extension including New

Capabilities Structure. Provides an alter-

nate access method for user or system

defined parameters or configuration data.

■

PCI Target Programmable Burst. The PCI

9030 may be programmed for several

burst lengths, including unlimited burst.

This allows for maximum transfer rates

on both the PCI and local bus.

■

PCI Target Delayed Write. The PCI 9030

supports PCI Target Delayed Write mode

where the PCI Target Write data is post-

poned in the PCI Target Write FIFO to

allow uninterrupted burst transactions

on the Local bus. This allows for a higher

throughput for conditions in which the

PCI clock frequency is slower than the

Local clock frequency or when Local bus

bursting is desirable.

PCI 9030 SMARTarget I/O

Accelerator

Only the PCI 9030 has SMARTarget tech-

nology, a set of advanced features which

go far beyond the minimum to provide

the best possible performance and flexi-

bility to simplify the design. A basic target

design is one thing, but a SMARTarget

design is much more.

SMARTarget Performance Features:

■

PCI v2.2 Compliant 32-bit, 33MHz

Target Interface Chip enabling PCI Burst

Transfers up to 132Mbytes/second.

■

Up to 60MHz Local Bus operation

enabling burst transfers up to

240Mbytes/second

■

PCI Target Read Ahead Mode. The

PCI 9030 will prefetch a programmable

amount of data from the local bus.

The prefetched data can then be burst

transferred on the PCI bus from the PCI

9030 internal PCI Target Read FIFO. The

prefetch size can be programmed to

match the PCI master burst length or can

be used as PCI Target Read Ahead mode

data. This feature allows for increased

bandwidth and reduced read latency.

32-bit 60MHz Local Bus

32-bit, 33MHz Compact PCI Bus

I/O

PCI 9030

SMARTarget

™

Device

ENUM#

LED

I/O

I/O Memory

32-bit 60MHz Local Bus

32-bit, 33MHz System PCI Bus

Memory

PCI 9030

SMARTarget

™

Device

I/O

Figure 1.

Typical PCI Target

Adapter Card

Figure 2.

Typical CompactPCI

Hot Swap Adapter Card

GPIO's and Programmable Chip selects

save additional valuable board space. The

PCI 9030 enables a whole new generation

of mini form factor PCI cards. This is

shown in figure 3 and 4:

Additional Features

■

5V Tolerant Operation- The PCI 9030

requires 3.3 Vcc. It provides 3.3V signal-

ing with 5V I/O tolerance on the PCI

and Local Buses.

■

Serial EEPROM Interface-Contains an

interface for an optional serial EEPROM

that can be used to load configuration

information.

■

Clocks-The Local Bus runs from a local

bus clock and asserts the necessary

internal clocks. This clock runs asynchro-

nously to the PCI clock. The PCI 9030

provides a PCI Buffered clock which can

be used as a local bus clock if desired.

■

PCI Power Management supports both

D0, D3hot and D3cold power states.

■

3.3V, 5V Tolerant PCI Signaling enables

universal PCI adapters

■

3.3V CMOS device in space saving 180

pin mBGA or 176-PQFP

PCI 9030 Applications

PCI Target Adapter Card

The PCI 9030 can be used in a wide vari-

ety of applications in networking, telecom,

imaging, industrial and storage. The PCI

9030 simplifies migration of legacy designs

to PCI by providing a convenient off-the-

shelf solution that can enable you to

have your prototypes operational in as

little as one week. At the same time, the

PCI 9030's built in SMARTarget perfor-

mance features guarantee you will meet

or beat your performance goals. In addi-

tion, SMARTarget flexibility features such

as 3.3V and 5V tolerant I/O buffers and

local bus operation up to 60MHz, enable

you to connect a wide variety of memory

and I/O devices. With SMARTarget in

action, PCI Target Adapter designs have

never been simpler. Figure 1 shows a

typical PCI Target adapter card.

CompactPCI Hot Swap Adapter Card

Hot Swap capability is a requirement for

today's CompactPCI systems.

The PCI 9030 provides an

excellent solution because it is

the industry's first Hot Swap

Ready Target chip. SMARTarget

Technology will ensure a high

performance Hot Swap imple-

mentation. The PCI 9030 is a

PICMG v2.1 Hot Swap Ready

target device including the

following features:

■

PCI specification v2.1

or better

■

Tolerant of Vcc from early power

■

Tolerant of asynchronous reset

■

Tolerant of precharge voltage

■

Has limited I/O pin leakage at

precharge voltage

■

Incorporates the Hot Swap

Control/Status Register (HS_CSR)

■

Incorporates an Extended Capability

Pointer (ECP) mechanism

■

Incorporates added resources for soft-

ware control of ENUM#, the ejector

switch, and the status LED which

indicates to the user insertion /removal

■

Precharge BIOS internal to the

PCI 9030

■

Early power support internal to the

PCI 9030

Figure 2 shows a typical Compact PCI

Hot Swap adapter card.

Small Form Factor PCI Designs

In the real estate conscious world of

PMC, PC-MIP, and PCMCIA PC-Cards,

the PCI 9030's attractive packaging

options are the perfect solution.

SMARTarget Flexibility features such as

32-bit 60MHz Local Bus

32-bit, 33MHz PCI Bus

I/OMemory

PCI 9030

SMARTarget™

Device

(mBGA)

Figure 3.

PMC Card

PCI 9030

SMARTarget™

Device

(mBGA)

32-bit 60MHz

Local Bus

Memory

I/O

Figure 4.

PCMCIA PC-CARD

PLX Technology, Inc.

390 Potrero Ave.

Sunnyvale, CA 94085 USA

Tel: 1-800-759-3735

Fax: 1-408-774-2169

Email: info@plxtech.com

Web Site: www.plxtech.com

2001 by PLX Technology, Inc. All rights reserved. PLX and Data Pipe Architecture are trademarks of PLX Technology, Inc. All oth er product names that appear in this material are for identication purposes only and are acknowledged to be

trademarks or registered trademarks of their respective companies. Information supplied by PLX is believed to be accurate and r eliable, but PLX Technology, Inc. assumes no responsibility for any errors that may appear in this material. PLX

Technology, Inc. reserves the right, without notice, to make changes in product design or specication.

Development Tool Support

As any good designer knows, development tools are just as important as the chips themselves. That is why PLX provides a

complete PCI development environment to speed your time to market. The PCI 9030 is supported with a complete Reference

Design Kit (RDK) with software debug support, and a hardware development kit (HDK) CD-ROM. These tools provide the

easiest PCI target prototyping platform available. With the PLX PCI development environment you can have your hardware

and software prototypes running in as little as one week.

9030-SIL-PB-P1-03 7/2000 5K

CompactPCI

Pr od uc t Or de ri ng I nf or ma ti on

See PLX web site for latest version and product support information.

Part Number Description

PCI 9030-AA60PI PCI SMARTarget I/O Accelerator (PQFP)

PCI SMARTarget I/O Accelerator (PQFP) (Lead-Free)

PCI SMARTarget I/O Accelerator ( BGA) (Lead-Free)

PCI 9030-AA60PI F

PCI 9030-AA60BI F

PCI 9030-AA60BI PCI SMARTarget I/O Accelerator ( BGA)

PCI 9030RDK-LITE PCI 9030 Reference Design kit

CompactPCI 9030RDK-LITE CompactPCI 9030 Reference Design Kit

HDK Collection CD-ROM Hardware Development Kit Collection CD-ROM

Host-SDK Windows Host Side Software Development Kit

32-bit, 33MHz PCI Bus

32-bit, 60MHz Local Bus

Endian

Control Logic

Local Bus

Control Logic

Dynamic Data

Bus Width

Control Logic

Multiplexed/

Non Multiplexed

Control Logic

Local Bus

Interface

Control Logic

PCI Bus

Control Logic

Hot Swap

Control Logic

PCI Bus

Interface

Control Logic

Read

FIFO Write

FIF0

FIFO

Control

Logic

Local

Conguration

PCI

Conguration

Serial

EEPROM

Controller

PLX PCI 9030 Block Diagram