CPC1002NTR - Clare - Datasheet.Live

www.clare.com

DS-CPC1002N-R04 1

CPC1002N

Single-Pole, Normally Open

4-Pin SOP OptoMOS® Relay

RoHS

2002/95/EC e3

Part # Description

CPC1002N 4-Pin SOP (100/tube)

CPC1002NTR 4-Pin SOP (2000/reel)

Parameter Rating Units

Blocking Voltage 60 VP

Load Current 700 mA

Max On-resistance 0.55 Ω

LED Current to operate 2 mA

Applications

Features

Description

Ordering Information

Pin Configuration

• Security

• Passive Infrared Detectors (PIR)

• Data Signalling

• Sensor Circuitry

• Instrumentation

• Multiplexers

• Data Acquisition

• Electronic Switching

• I/O Subsystems

• Meters (Watt-Hour, Water, Gas)

• Medical Equipment—Patient/Equipment Isolation

• Aerospace

• Industrial Controls

• Designed for use in security systems complying

with EN50130-4

• Only 2mA of LED current required to operate

• Small 4-Pin SOP Package

• TTL/CMOS Compatible input

• 100% Solid State

• High Reliability

• Arc-Free With No Snubbing Circuits

• 1500Vrms Input/Output Isolation

• No EMI/RFI Generation

• Immune to radiated EM fields

• SMD Pick & Place, Wave Solderable

• Tape & Reel Version Available

The CPC1002N is a miniature, normally open

(1-Form-A) DC solid state relay in a 4-Pin SOP

package that employs optically coupled MOSFET

technology to provide 1500Vrms of input to output

isolation. The super-efficient MOSFET switches and

photovoltaic die use Clare’s patented OptoMOS

architecture. The optically coupled output is controlled

by the input's highly efficient GaAlAs infrared LED.

The CPC1002N uses Clare’s state of the art double-

molded vertical construction packaging to produce

one of the world’s smallest relays. The CPC1002N

offers board space savings of at least 20% over the

competitor’s larger 4-Pin SOP relay.

+ Control

– Control

DC +

DC -

Switching Characteristics

of Normally Open Devices

Form-A

ILOAD

10%

90%

ton toff

Approvals

• UL Recognized Component: File E76270

• CSA Certified Component: Certificate 1175739

• EN/IEC 60950-1 Certified Component:

TUV Certificate B 09 07 49410 004

www.clare.com

2R04

CPC1002N

Absolute Maximum Ratings are stress ratings. Stresses in

excess of these ratings can cause permanent damage to

the device. Functional operation of the device at conditions

beyond those indicated in the operational sections of this

data sheet is not implied.

Absolute Maximum Ratings @ 25ºC

Parameter Ratings Units

Blocking Voltage 60 VP

Reverse Input Voltage 5 V

Input Control Current

Peak (10ms)

50 mA

Input Power Dissipation 70 mW

Total Power Dissipation 1400 mW

Isolation Voltage Input to Output 1500 Vrms

Operational Temperature -40 to +85 °C

Storage Temperature -40 to +125 °C

1 Derate linearly 3.33 mW / ºC

Parameter Conditions Symbol Min Typ Max Units

Output Characteristics

Load Current, Continuous 1IF=2mA IL- - 700 mA

Peak Load Current t=10ms ILPK --1A

On-Resistance 2IL=100mA RON - 0.35 0.55 Ω

Off-State Leakage Current VL=60VPILEAK --1μA

Switching Speeds

Turn-On IF=3mA, VL=10V ton - 1.3 5 ms

Turn-Off toff - 0.41 2

Output Capacitance VL=50V; f=1MHz COUT -25 -pF

Input Characteristics

Input Control Current 3IL=100mA IF- 0.55 2 mA

Input Dropout Current - IF0.3 - - mA

Input Voltage Drop IF=5mA VF0.9 1.2 1.4 V

Reverse Input Current VR=5V IR--10μA

Common Characteristics

Capacitance Input to Output - CI/O -1 -pF

1 Load current derates linearly from 700mA @ 25oC to 420mA @80oC.

2 Measurement taken within 1 second of on-time.

3 For applications requiring high temperature operation (greater than 60oC) a LED drive current of 3mA is recommended.

Electrical Characteristics @ 25ºC

CPC1002N

www.clare.com 3

R04

PERFORMANCE DATA*

*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written speciﬁ cations, please

contact our application department.

1.0 1.2 1.4 1.61.1 1.3 1.5

Turn-On (ms)

Device Count (N)

Typical Turn-On Time

(IF=3mA, IL=100mA, TA=25ºC)

0.38 0.40 0.42 0.440.430.410.39

Turn-Off (ms)

Device Count (N)

Typical Turn-Off Time

(IF=3mA, IL=100mA, TA=25ºC)

0.32 0.34 0.36 0.380.33 0.35 0.37

Device Count (N)

Typical On-Resistance Distribution

(IL=100mA, TA=25ºC)

On-Resistance (Ω)

0.50 0.60 0.700.45 0.55 0.65 0.75

LED Current (mA)

Device Count (N)

Typical IF for Switch Operation

(IL=100mA, TA=25ºC)

0.50 0.60 0.700.45 0.55 0.65 0.75

LED Current (mA)

Device Count (N)

Typical IF for Switch Dropout

(IL=100mA, TA=25ºC)

68 70 72 7469 71 73

Blocking Voltage (VP)

Device Count (N)

Typical Blocking Voltage Distribution

(TA=25ºC)

1.17 1.19 1.21 1.23 1.25

LED Forward Voltage Drop (V)

Device Count (N)

Typical LED Forward Voltage Drop

(IF=5mA, TA=25ºC)

LED Forward Current (mA)

Turn-On (ms)

05 1015202530354045

Typical Turn-On

vs. LED Forward Current

(IL=100mA)

LED Forward Current (mA)

Turn-Off (ms)

05 1015202530354045

0.7

0.6

0.5

0.4

0.3

0.2

0.1

Typical Turn-Off

vs. LED Forward Current

(IL=100mA)

Temperature (ºC)

-40 -20 0 20 40 60 80 100

LED Forward Voltage Drop (V)

1.0

1.1

1.2

1.3

1.4

1.5

1.6

Typical LED Forward Voltage Drop

vs. Temperature

IF=1mA

IF=2mA

IF=5mA

IF=10mA

IF=20mA

IF=50mA

Turn-On (ms)

-40

2.50

2.25

2.00

1.75

1.50

1.25

1.00

0.75

0.50

0.25

-20 0 20 40 60 80 100

Typical Turn-On vs. Temperature

(IF=3mA, IL=100mA)

Temperature (ºC)

Turn-Off (ms)

-40

1.0

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

-20 0 20 40 60 80 100

Typical Turn-Off vs. Temperature

(IF=3mA, IL=100mA)

Temperature (ºC)

www.clare.com

4R04

CPC1002N

PERFORMANCE DATA*

*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written speciﬁ cations, please

contact our application department.

LED Current (mA)

-40

1.50

1.25

1.00

0.75

0.50

0.25

-20 0 20 40 60 80 100

Typical IF for Switch Operation

vs. Temperature

(IL=100mA)

Temperature (ºC)

LED Current (mA)

-40

1.50

1.25

1.00

0.75

0.50

0.25

-20 0 20 40 60 80 100

Temperature (ºC)

Typical IF for Switch Dropout

vs. Temperature

(IL=100mA)

-40

1.2

1.0

0.8

0.6

0.4

0.2

-20 0 20 40 60 80 100

Typical On-Resistance vs. Temperature

(IL=100mA)

Temperature (ºC)

On-Resistance (Ω)

=2mA

=5mA

Load Voltage (V)

Load Current (mA)

600

500

400

300

200

100

0 0.05 0.10 0.15 0.20 0.25 0.30

Typical Load Current vs. Load Voltage

(IF=2mA, TA=25ºC)

Load Current (mA)

900

800

700

600

500

400

300

200

100

Typical Maximum Load Current

vs. Temperature

-40 -20 0 20 40 60 80 120100

Temperature (ºC)

IF=5mA

IF=2mA

Blocking Voltage (VP)

-40

-20 0 20 40 60 80 100

Typical Blocking Voltage

vs. Temperature

Temperature (ºC)

-40

0.016

0.014

0.012

0.010

0.008

0.006

0.004

0.002

-20 0 20 40 60 80 100

Leakage (μA)

Temperature (ºC)

Typical Leakage vs. Temperature

Measured Across Pins 3&4

(VL=60V)

Time

Load Current (A)

2.0

1.8

1.6

1.4

1.2

1.0

0.8

0.6

0.4

0.2

10μs 100μs 1ms 100ms 1s10ms 10s 100s

Energy Rating Curve

CPC1002N

www.clare.com 5

R04

Manufacturing Information

Moisture Sensitivity

All plastic encapsulated semiconductor packages are susceptible to moisture ingression. Clare classified all

of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry

standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to

the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled

according to the limitations and information in that standard as well as to any limitations set forth in the information or

standards referenced below.

Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced

product performance, reduction of operable life, and/or reduction of overall reliability.

This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according

to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.

Device Moisture Sensitivity Level (MSL) Rating

CPC1002N MSL 3

ESD Sensitivity

This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.

Reflow Profile

This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020

must be observed.

Device Maximum Temperature x Time

CPC1002N 260ºC for 30 seconds

Board Wash

Clare recommends the use of no-clean flux formulations. However, board washing to remove flux residue is

acceptable. Since Clare employs the use of silicone coating as an optical waveguide in many of its optically isolated

products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes.

Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy

should not be used.

RoHS

2002/95/EC e3

Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications

and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of

Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability,

fitness for a particular purpose, or infringement of any intellectual property right.

The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other

applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental

damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice.

Specification: DS-CPC1002N-R04

OptoMOS® is a registered trademark of Clare, Inc.

8/20/2010

For additional information please visit our website at: www.clare.com

CPC1002N

MECHANICAL DIMENSIONS

Recommended PCB Land Pattern

2.54

(0.10)

5.60

(0.2205)

1.30

(0.0512)

0.60

(0.0217)

Dimensions

(inches)

Pin 1

4.089 ± 0.203

(0.161 ± 0.008)

2.54 Typ

(0.100 Typ)

6.096 ± 0.102

(0.240 ± 0.004)

3.810 ± 0.076

(0.150 ± 0.003) 0.432 ± 0.127

(0.017 ± 0.005)

0.200 ± 0.025

(0.008 ± 0.001)

1.02 ± 0.025

(0.040 ± 0.001)

2.184 Max

(0.086 Max)

0.381 TYP.

(0.015 TYP.)

Lead to package standoff:

MIN: 0.0254 (0.001)

MAX: 0.102 (0.004)

0.762 ± 0.102

(0.030 ± 0.004)

Dimensions

(inches)

NOTE: All dimensional tolerances per Standard EIA-481-2 except as noted

Embossment

Embossed

Carrier

330.2 Dia

(13.00 Dia)

Top Cover

Tape Thickness

0.102 Max

(0.004 Max)

ser Direction of Fee

User Direction of Feed

K0=2.70

(0.106)

K1=2.30

(0.091)

B0=4.70

(0.185)

W=12.00

(0.472)

P=8.00

(0.315)

A0=6.50

(0.256)

CPC1002N

CPC1002N Tape & Reel