ST7FLIT2-COS/COM Cosmic's low-cost starter kit for ST7FLITE2 and ST7FLITE1 Data brief Features Description The Cosmic starter kit for ST7FLITE2 (ST ordering code: ST7FLIT2-COS/COM) is a lowcost kit that provides everything you need to evaluate ST7FLITE2 and ST7FLITE1 features, including Flash memory with read-out protection, on-board EEPROM data memory, 10-bit ADC, 1% internal RC oscillator, SPI and auto-reload timer. ST7FLITE2 evaluation board - ICD via RS232 connector (RS232 cable is included) - 2 real-time hardware breakpoints, which can be combined to provide advanced breakpoints - ST7FLITE2 microcontroller - LEDs and switches on analog and digital I/O ports - Potentiometer - 9 V battery Cosmic tool suite - IDEA, Integrated Development Environment for ST7 - Integrated editor with syntax highlighting for C and Assembly source files - Project manager for easy access to frequently used functions - Link file generator for point-and-click configuration of memory map - Graphical smart build for easy control of application (re)build and user-defined utilities (No need for a makefile) ) (s ) s ( ct u d o r P e The ST7FLITE2 starter kit takes advantage of the Debug module of the ST7FLITE2 microcontroller (MCU) to provide in-circuit debugging (ICD) via the kit's RS232 connector. s b O t e l o Figure 1. ST7FLITE2 starter kit t c u d o r P e t e l o CXST7 compiler, assembler and linker package - ANSI and ISO standard C compiler - Reentrant and recursive using ANSI stack frame conventions - 7 programming models - C support for zero page - Bit variables s b O ZAP debugger - C and Assembly source-level debugging with coordinated source and disassembly displays - ANSI C debugging for easy access to C objects, including Enums, Bit fields, Structs, Floats, etc. November 2011 Doc ID 11548 Rev 2 For further information contact your local STMicroelectronics sales office. 1/4 www.st.com 4 Product architecture ST7FLIT2-COS/COM 1 Product architecture 1.1 The ST7FLITE2 evaluation board Provides features for evaluation of the included ST7FLITE2 device (analog and digital I/Os, LEDs, switches, and potentiometer). It includes an RS232 connector, which direct ICD connection between the board and the host PC running the ZAP debugging software. The included ST7FLITE2 device allows you to develop applications for all ST7FLITE2x and ST7FLITE1x microcontrollers. 1.2 Cosmic tool suite ) s ( ct The IDEA integrated development environment running on the host PC is preconfigured for use with the Cosmic C compiler for ST7 (CXST7). It integrates a complete range of Cosmic tools for editing, compiling and debugging your application from a single, easy-to-use environment. u d o 1.3 r P e t e l o Cosmic C compiler (CXST7) The 2 K code-size limited version includes syntax extensions for efficient use of all microcontroller specific features (zero page, peripherals, EEPROM, paged memory). s b O The 16 K code-size version of the Cosmic C compiler is available for free download at www.cosmic-software.com. ) (s t c u 1.4 ZAP debugger d o r Full-featured debugging software allows source-level debugging of your embedded application while it runs on the board's ST7FLITE2 thanks to the ICD connection and the MCU's on-chip debugging resources. P e For further information you can refer to www.st.com/mcu, or the Cosmic internet site www.cosmicsoftware.com. t e l o s b O 2/4 Doc ID 11548 Rev 2 ECOPACK(R) ST7FLIT2-COS/COM ECOPACK(R) 2 In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. 3 Revision history Table 1. ) s ( ct Document revision history Date Revision Changes 15-Aug-2005 1 Initial release. 17-Nov-2011 2 Document formatting updated. u d o r P e t e l o ) (s s b O t c u d o r P e t e l o s b O Doc ID 11548 Rev 2 3/4 ST7FLIT2-COS/COM ) s ( ct Please Read Carefully: u d o Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. r P e All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. t e l o No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. ) (s s b O UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. t c u UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. d o r P e t e l o Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. s b O ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2011 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 4/4 Doc ID 11548 Rev 2