303
Dimensions are shown for
reference purposes only. Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change. www.tycoelectronics.com
Technical support:
Refer to inside back cover.
P&B
Catalog 1308242
Issued 3-03JWD/JWS series
Dual In-Line Package &
Single In-Line Package
Dry Reed Relays
File E29244 File LR81479
Ordering Information – Boldface items are more likely to be stocked.
Features
• JWD has dual in-line package (DIP) configuration. (14-pin DIP)
• JWS has single in-line package (SIP) configuration.
• Low cost, dry reed reliability with various contact arrangements.
• Wave solderable and immersion cleanable.
• Optional coil suppression diode.
JWD
JWS
Note: Magnetic shielding may be required between relays when they are placed in very
close proximity to one another.
Outline Dimensions
Nom. Resis- Must Must Max. Nom. Wir-
Relay Volt- tance Operate Release Volt- Coil ing
Part Diode age ±10% Voltage Voltage age Power Dia.
No. (VDC) (Ohms) (VDC) (VDC) (VDC) (mW) No.
JWD (DIP units) with 1 Form A (SPST-NO) contacts rated 10W max.
JWD-107-1 No 5/6 500 3.8 0.5 19 50/72 1
JWD-107-5 Yes 5/6 500 3.8 0.5 19 50/72 1
JWD-107-3 No 12 1,200 9.6 1.0 19 120 1
JWD-107-7 Yes 12 1,200 9.6 1.0 19 120 1
JWD-171-5 No 24 2,150 19.2 2.0 40 268 2
JWD-171-10 Yes 24 2,150 19.2 2.0 40 268 2
JWD (DIP units) with 2 Form A (DPST-NO) contacts rated 10W max.
JWD-171-21 No 5/6 200 3.8 0.5 14 125/180 3
JWD-171-25 Yes 5/6 200 3.8 0.5 14 125/180 3
JWD-171-23 No 12 500 9.6 1.0 19 288 3
JWD-171-27 Yes 12 500 9.6 1.0 19 288 3
JWD-171-24 No 24 2,200 19.2 2.0 40 262 3
JWD-171-28 Yes 24 2,200 19.2 2.0 40 262 3
JWD (DIP units) with 1 Form B (SPST-NC) contacts rated 10W max.
JWD-171-12 No 5/6 500 3.8 0.5 7 50/72 4
JWD-171-17 Yes 5/6 500 3.8 0.5 7 50/72 4
JWD-171-14 No 12 1,200 9.6 1.0 16 120 4
JWD-171-19 Yes 12 1,200 9.6 1.0 16 120 4
JWD-171-15 No 24 2,200 19.2 2.0 40 262 4
JWD-171-20 Yes 24 2,200 19.2 2.0 40 262 4
JWD (DIP units) with 1 Form C (SPDT) contacts rated 3W max.
JWD-172-1 No 5/6 200 3.8 0.5 12 125/180 5
JWD-172-5 Yes 5/6 200 3.8 0.5 12 125/180 5
JWD-172-3 No 12 500 9.6 1.0 19 288 5
JWD-172-7 Yes 12 500 9.6 1.0 19 288 5
JWD-172-4 No 24 2,200 19.2 2.0 38 262 5
JWD-172-8 Yes 24 2,200 19.2 2.0 38 262 5
JWD-172-155 No 5/6 200 3.8 0.5 12 125/180 6
JWD-172-159 Yes 5/6 200 3.8 0.5 12 125/180 6
JWD-172-157 No 12 1,000 9.6 1.0 19 144 6
JWD-172-161 Yes 12 1,000 9.6 1.0 19 144 6
JWD-172-158 No 24 2,150 19.2 2.0 38 268 6
JWD-172-162 Yes 24 2,150 19.2 2.0 38 268 6
JWS (SIP units) with 1 Form A (SPST-NO) contacts rated 10W max.
JWS-117-1 No 5 500 3.8 0.5 16 50 7
JWS-117-6 Yes 5 500 3.8 0.5 16 50 7
JWS-117-3 No 12 530 9.6 1.0 19 272 7
JWS-117-8 Yes 12 530 9.6 1.0 19 272 7
JWS-117-13 No 12 1,850 9.6 1.0 30 78 7
JWS-117-18 Yes 12 1,850 9.6 1.0 30 78 7
JWS-117-5 No 24 2,150 19.2 2.0 36 268 7
JWS-117-10 Yes 24 2,150 19.2 2.0 36 268 7
Wiring Diagrams (Top Views)
Mechanical Data
Termination: Printed circuit terminals on 0.100" (2.54mm) grid centers.
Enclosure Type: Black molded epoxy package.
Weight: 0.08 oz. (2.3g) approximately.
Environmental Data
Temperature Range: -35°C to +85°C.
Shock: 100 g, max., in three planes for 8 ms, 1/2 wave pulse.
Vibration: 20 g, max., between 10 and 2,000 Hz.
Operate Data @ 25°C
Operate Time (Including Bounce)†: 1.5 ms, max.
Release Time (Including Bounce)†: 0.5 ms, max., for Forms A & B;
3.0 ms, max., for Form C.
† At or from Nominal Coil Voltage.
Coil Data @ 25°C
See Ordering Information table.
Initial Insulation resistance
Between Mutually Insulated Conductors: 1010 ohms at 100VDC.
Initial Dielectric Strength
Between Open Contacts: 250VDC for Forms A & B; 175VDC for Form C.
Between Contacts and Coil: 500VDC.
Contact Data @ 25°C
.770 MAX.
(19.56)
.315 (8.0) MAX.
WITH TERMINALS
VERTICAL
.125 ± .010
(3.18 ± .254)
.100 TYP .
(2.54) .600
(15.24)
.020 TYP.
(.51)
.300 MAX.
(7.62)
4° MAX.
TYP..012 TYP.
(.3)
12 67
.018 TYP.
(.46)
.020 TYP.
(.51)
.800 MAX.
(20.32)
1357
.200 TYP.
(5.08)
.260 MAX.
(6.6)
.307 MAX.
(7.8)
.125 ± .010
(3.18 ± .254)
.010 TYP.
(.25)
Note: Terminal numbers are for reference only and do not appear on relays.
6+217
8 9 1314
76 +21
8 9 1314
▼
76 +21
8 9 1314
▼
▼
6+217
8 9 1314
▼
MAGNET
▼
▼
▼
▼
▼
1+3 5 7
▼
6+217
131489
▼
▼
6+217
13 1489
▼
▼
▼
▼
▼
Dia. 5 Dia. 6 Dia. 7
Dia. 1 Dia. 2 Dia. 3 Dia. 4
Arrangements: 1 Form A (SPST - NO) on JWD & JWS. 1 Form B (SPST - NC),
1 Form C (SPDT) and 2 Form A (DPST-NO) on JWD only.
Material: Ruthenium.
Expected Mechanical Life: 100 million operations.
Expected Electrical Life:
Resistive Load End of Life Criteria No. of Operations
Forms A & B 20VDC, 500mA 500mV Loss 1 x 106
20VDC, 250mA 500mV Loss 20 x 106
Low Level (5VDC, 1mA) 50 Ohms 100 x 106
Form C 12VDC, 500mA 500mV Loss 1 x 106
10VDC, 10mA 50 Ohms 25 x 106
Low Level (5VDC, 1mA) 50 Ohms 100 x 106
Contact Ratings:
Maximum Switched Voltage: 100VDC for Forms A & B; 28VDC for Form C.
Maximum Switched Current: 500mA for all models.
Maximum Switched Power:10W for Forms A & B; 3W for Form C.
Initial Contact Resistance: 200 milliohms, max. at 10mA, 6VDC.
Users should thoroughly review the technical data before selecting a product
part number. It is recommended that users also seek out the pertinent
approvals files of the agencies/laboratories and review them to ensure the
product meets the requirements for a given application.
