SPEC NO: DSAB2954 REV NO: V.1 DATE: MAY/19/2002 PAGE: 1 OF 5
APPROVED : J. Lu CHECKED :Joe Lee DRAWN:L.ZHANG
SURFACE MOUNT DISPLAY
APSC03-41MBWA BLUE
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the lead emerge package.
4. Specifications are subject to change without notice.
Features
!0.3 INCH DIGIT HEIGHT.
!LOW CURRENT OPERATION.
!EXCELLENT CHARACTER APPEARANCE.
!I.C. COMPATIBLE.
!MECHANICALLY RUGGED.
!GRAY FACE,WHITE SEGMENT.
!PACKAGE : 1100PCS / REEL.
Package Dimensions& Internal Circuit Diagram
Description
The Blue source color devices are made with GaN on SiC
Light Emitting Diode.
Static electricity and surge damage the LEDS. It is
recommended to use a wrist band or anti-electrostatic glove
when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
D
SPEC NO: DSAB2954 REV NO: V.1 DATE: MAY/19/2002 PAGE: 2 OF 5
APPROVED : J. Lu CHECKED :Joe Lee DRAWN:L.ZHANG
Electrical / Optical Characteristics at T)=25°°
°°
°C
Absolute Maximum Ratings at T)=25°°
°°
°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Selection Guide
.oNtraP.oNtraP .oNtraP .oNtraP.oNtraPeciDeciD eciD eciDeciDepyTsneLepyTsneL epyTsneL epyTsneLepyTsneL
)dcm(vI)dcm(vI )dcm(vI )dcm(vI)dcm(vI
Am01@ noitpircseDnoitpircseD noitpircseD noitpircseDnoitpircseD
.niM.niM .niM .niM.niM.pyT.pyT .pyT .pyT.pyT
AWBM14-30CSPA)NaG(EULBDESUFFIDETIHW9.15 dnaH.tR,edohtaCnommoC
lamiceD
retemaraPretemaraP retemaraP retemaraPretemaraP eulBeulB eulB eulBeulBstinUstinU stinU stinUstinU
noitapissidrewoP 501Wm
tnerruCdrawroFCD 03Am
]1[tnerruCdrawroFkaeP 051Am
egatloVesreveR 5V
erutarepmeTgnitarepO 04- °58+oTC °C
erutarepmeTegarotS 04- °58+oTC °C
lobmySlobmyS lobmyS lobmySlobmySretemaraPretemaraP retemaraP retemaraPretemaraPeciveDeciveD eciveD eciveDeciveD.pyT.pyT .pyT .pyT.pyT.xaM.xaM .xaM .xaM.xaMstinUstinU stinU stinUstinUsnoitidnoCtseTsnoitidnoCtseT snoitidnoCtseT snoitidnoCtseTsnoitidnoCtseT
λkaep htgnelevaWkaePeulB034mnI
F
Am02=
λDhtgnelevaWetanimoDeulB664mnI
F
Am02=
λ∆ 2/1 htdiw-flaHeniLlartcepSeulB06mnI
F
Am02=
CecnaticapaCeulB001FpV
F
zHM1=f;V0=
V
F
egatloVdrawroFeulB8.35.4V I
F
Am02=
I
R
tnerruCesreveReulB01AuV
R
V5=
SPEC NO: DSAB2954 REV NO: V.1 DATE: MAY/19/2002 PAGE: 3 OF 5
APPROVED : J. Lu CHECKED :Joe Lee DRAWN:L.ZHANG
Blue APSC03-41MBWA
SPEC NO: DSAB2954 REV NO: V.1 DATE: MAY/19/2002 PAGE: 4 OF 5
APPROVED : J. Lu CHECKED :Joe Lee DRAWN:L.ZHANG
Recommended Soldering Pattern
(Units : mm)
APSC03-41MBWA
SMT Reflow Soldering Instruction
Number of reflow process shall be less than 2 times and cooling
process to normal temperature is required between first and
second soldering process.
SPEC NO: DSAB2954 REV NO: V.1 DATE: MAY/19/2002 PAGE: 5 OF 5
APPROVED : J. Lu CHECKED :Joe Lee DRAWN:L.ZHANG
Tape Specification
(Units : mm)
