POWER
NLP40 Series
Single, Dual and Triple Output
Total Power: 40 - 50 W
Input Voltage: 90 - 264 Vac
120 - 370 Vdc
# of Outputs: Single, dual, triple
SPECIAL FEATURES
4.25 x 2.5 x 1.15 inch package
(1U applications)
Universal input
Overvoltage and short circuit
protection
40 W with free air convection
EN55022, EN55011 conducted
emission level B
EN61000-4-2, -3, -4, -5, -6 immunity
compliant
UL, VDE and CSA safety approvals
NLP40 enclosure kit available
RoHS compliant
SAFETY
VDE0805/EN60950/IEC950
File 10401-3336-0093
Licence No. 93662
UL 60950 File No. E132002
CSA C22.2 No. 950
File No. LR41062C
Electrical Specications
Input
Input voltage range
(See Note 9)
Universal input 90 - 264 Vac
120 - 370 Vdc
Input frequency range 47 - 440 Hz
Input surge current 120 Vac, cold start
230 Vac, cold start
15 A max.
30 A max.
Safety ground leakage current
120 Vac, 60 Hz
230 Vac, 50 Hz
0.2 mA
0.4 mA
Input current 120 Vac
230 Vac
1.4 A rms
0.7 A rms
Input fuse UL/IEC127 250 Vac H 3.15 A
Output
Total regulation
(Line and load)
Main output
Auxiliary outputs
±2.0%
±5.0%
Rise time At turn-on 1.0 s, max.
Transient response Main output
25% step at 0.1 A/µs
5.0% max. dev.,
1 ms rec. to 1.0%
Temperature coefficient ±0.02%/°C
Overvoltage protection Main outputs 135%, ±15%
Short circuit protection Cyclic operation Continuous
Minimum output current Single
Multiple
0 A
(See Note 5)
Data Sheet
NLP40 Series Data Sheet
EMC Charateristics (10)
Conducted emissions EN55022, FCC part 15 Level B
Radiated emissions EN55022, FCC part 15 Level A
ESD air EN61000-4-2, level 3 Perf. criteria 1
ESD contact EN61000-4-2, level 3 Perf. criteria 1
Surge EN61000-4-5, level 3 Perf. criteria 1
Fast transients EN61000-4-4, level 3 Perf. criteria 1
Radiated immunity EN61000-4-3, level 3 Perf. criteria 1
Conducted immunity EN61000-4-6, level 3 Perf. criteria 1
General Specications
Hold-up time 120 Vac
230 Vac
12 ms @ 40 W
20 ms @ 40 W
Efficiency 75% typical
Isolation voltage Input/output
Input/chassis
3000 Vac
1500 Vac
Switching frequency Fixed 65 kHz, ±5 kHz
Approvals and standards
(See Note 8)
UL, CSA VDE 60950, IEC950, UL1950
VDE0805, CSA C22.2 No. 950
Weight 200 g (7.06 oz)
MTBF demonstrated MIL-HDBK-217F 150,000 hours min.
Environmental Specications
Thermal performance Operating ambient (see derating curve) 0° C to +70 °C
(See Notes 6, 7, 9) Non-operating -40 °C to +70 °C
50 °C to 70 °C ambient, convection cooled Derate to 50% load
0 °C to 50 °C ambient, convection cooled 40 W
0 °C to 50 °C ambient, 20 CFM forced air 50 W
Peak (0 °C to +50 °C, 60 s) (See Note 2)
Relative humidity Non-condensing 5 to 95% RH
Altitude Operating 10,000 feet max.
Non-operating 30,000 feet max.
Vibration (See Note 4): 5-500 Hz 2.4 G rms peak
Shock Per MIL-STD-810E 516.4 Part IV
NLP40 Series Data Sheet
Output
Voltage
Output Current Ripple(3) Total
Regulation Model Number(11,12)
Max(1) Peak(2) Fan(1)
+3.3 V (IA)4 A 5 A 4.5 A 50 mV ±2.0% NLP40-76T366J(5)
+12 V (IB)2 A 3 A 3 A 120 mV ±5.0%
–12 V (IC)0.2 A 1 A 0.5 A 120 mV ±5.0%
+5 V (IA)4 A 5 A 4.5 A 50 mV ±2.0% NLP40-7608J(5)
+12 V (IB)2 A 3 A 3 A 120 mV ±5.0%
–12 V (IC)0.2 A 1 A 0.5 A 120 mV ±5.0%
+5 V (IA)4 A 5 A 4.5 A 50 mV ±2.0% NLP40-7610J(5)
+15 V (IB)1.6 A 2 A 2 A 150 mV ±5.0%
–15 V (IC)0.2 A 1 A 0.5 A 150 mV ±5.0%
+12 V (IA)1.8 A 2.2 A 2.1 A 120 mV ±2.0% NLP40-7627J(5)
-12 V (IB)1.8 A 2.2 A 2.1 A 120 mV ±5.0%
+5 V (IA)4 A 5 A 4.5 A 50 mV ±2.0% NLP40-7629J(5)
+12 V (IB)2 A 3 A 3 A 120 mV ±5.0%
3.3 V (IA)8 A 10 A 9 A 50 mV ±2.0% NLP40-76S3J
5 V 8 A 10 A 9 A 50 mV ±2.0% NLP40-7605J
12 V 3.3 A 4.5 A 4 A 120 mV ±2.0% NLP40-7612J
15 V 2.6 A 3.6 A 3.3 A 150 mV ±2.0% NLP40-7615J
24 V 1.6 A 2.5 A 2 A 240 mV ±2.0% NLP40-7624J
48 V 0.8 A 1.1 A 1 A 300 mV ±2.0% NLP40-7617J
Notes
1. Maximum output power is 40 W for natural convection cooling. With 20 CFM fan cooling, the maximum output power is 50 W.
2. Peak output current lasting less than 60 seconds with duty cycle less than 5%. During peak loading, output voltage may exceed total reg. limits.
3. Figure is peak-to-peak. Output noise measurements are made across a 50 MHz bandwidth using a 12 inch twisted pair, terminated with a 47 µF
capacitor.
4. Three orthogonal axes, random vibration 10 minutes for each axes, 2.4 G rms 5 Hz to 500 Hz.
5. For multiple output units (except -7627J, 76T366J) to maintain stated regulation then:
0.25 ≤ IA / IB ≤5, for IB > 0.3 A
0.50 ≤ IA / IB ≤5, for IB < 0.3 A
For maximum output current I(C) on triple output models, i.e. for IC = IMax., I Amin. ≥0.5 A and IA ≥ IB.
For NLP40-7627J only, to maintain stated regulation then: 0.5 ≤ IA/ IB ≤ 2.
For NLP40-76T366J only, to maintain stated regulation then: 0.25 ≤ IA/ IB ≤ 4.
6. For optimum reliability, no part of the heatsink should exceed 120 °C, and no semiconductor case temperature should exceed 130 °C.
7. CAUTION: Allow a minimum of 1 second after disconnecting line power when making thermal measurements.
8. This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product.
9. When the input voltage is <90 Vac the operating range is 0 °C to +40 °C.
10. For system EMI compliance, a ground choke may be required before connecting the ground wire to the chassis. It is recommended that this
ground choke be placed as close as possible to the systems ac inlet to eliminate noise pick-up in the system.
11. The ‘J’ suffix indicates that these parts are Pb-free (RoHS6/6) compliant. TSE RoHS 5/6 (non Pb-free) compliantversions may be available on
special request, please contact your local sales representative for details.
12. NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool
at http://www.artesyn.com/power to find a suitable alternative.
13. This product is a Component Power Supply and is only for inclusion by professional installers within other equipment and must not be operated
as a standalone product. EMC compliance to appropriate standards must be verified at the system level. This product is for sale to OEMs and
System Integrators, including through Distribution Channels. It is not intended for sale to End Users.
NLP40 Series Data Sheet
Mechanical Drawing
C5
MAXIMUM COMPONENT
HEIGHT 1.15 (29.21)
TOLERANCE: .xxx ± 0.005"
.xx ± 0.02"
ALL DIMENSIONS IN INCHES (mm)
4.25
(107.95)
1
N
J2
4.00
(101.60)
2.25
(57.15)
2.50
(63.50)
F1
L
J1
P1
Mounting
Hole Diameter
0.138 (3.50) Typical
0.125
(3.175)
T1
DERATING CURVE
Output Power (Watts)
0°C 10°C 20°C 30°C 40°C 50°C 60°C 70°C
20W
40W
50W
20 CFM FORCED AIR COOLING
25W
NATURAL
CONVECTION
COOLING
NLP40 Series Data Sheet
WORLDWIDE OFFICES
Americas
2900 S.Diablo Way
Tempe, AZ 85282
USA
+1 888 412 7832
Europe (UK)
Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX
United Kingdom
+44 (0) 1384 842 211
Asia (HK)
14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon
Hong Kong
+852 2176 3333
For more information: www.artesyn.com/power
For support: productsupport.ep@artesyn.com
Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and
service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names,
trademarks, or registered trademarks of their respective owners. © 2016 Artesyn Embedded Technologies, Inc.
All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal.
www.artesyn.com
NLP40 Series-DS 21Mar2016
Input Pin Connections
J1
Pin 1 AC Line
Pin 2 No Pin
Pin 3 AC Neutral
P1
Pin 1 Safety Ground
Input and Output Connectors Mating Connectors
AC (J1) Molex 26-60-4030 type Molex 09-50-3031 or equivalent with Molex 08-50-0105 or equivalent crimpterminals
DC (J2) Molex 26-60-4060 type Molex 09-50-3061 with Triurcon 6838 or equivalent crimp terminals
Output Pin Connections
J2 SINGLE DUAL TRIPLE
Pin 1 +Vout V (B) V (B)
Pin 2 +Vout V (A) V (A)
Pin 3 +Vout V (A) V (A)
Pin 4 Return Return Return
Pin 5 Return Return Return
Pin 6 Return Return V (C)
