ASSEMBLY TOOLS CONTENTS PAGE Crimping tools and inserts for flexible cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 385 Tool boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 387 Tool sets for semi-rigid cable assembling (solder type) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 389 Selection of common and helpful assembly tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 389 Assembly tools for BMA connectors with hermetic seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 394 Assembly tools for SK connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 394 Spanners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 395 Torque wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 395 Combination tool for MMBX/MMCX/MCX-right angle connectors . . . . . . . . . . . . . . . . . . . . . . . . 396 Special tools for QMA connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 396 Special tools for QN connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 397 Decoupling tool for MMPX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 397 Tap drill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 398 Various tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 398 Tools for HUBER+SUHNER QUICK-FIT connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 399 CRIMPING TOOLS AND INSERTS FOR FLEXIBLE CABLES H+S type Item no. Size Colour code Square-section (centre contact) Hexagonal section (outer contact) 75_Z-0-3-4 22544613 2B orange 1.6 mm / .063 in. 5.5 mm / .217 in. 75_Z-0-4-4 22544612 2C yellow 1.6 mm / .063 in. 6.5 mm / .256 in. HUBER+SUHNER Assembly tools 385 Appendix small crimp tool with fixed inserts small crimp tool with interchangeable inserts 1/2A, 2B, 2C Fig. 1 Fig. 2 H+S type Item no. Description Fig. 75_Z-0-0-50 22544754 tool without inserts 1 75_Z-0-0-51 22544755 tool with various inserts in wooden box (1/2A, 2B, 2C) 2 interchangeable inserts for small crimp tool H+S type Item no. Size Square-section (centre contact) Hexagonal section (outer contact) 76_Z-0-1-1 23000884 0.54/A 0.54 mm / .021 in. 3.3 mm / .130 in. 76_Z-0-2-20 22645153 1/4.95 0.7 mm / .028 in. 4.95 mm / .195 in. 76_Z-0-2-51 22544756 1/2A 0.7/1.6 mm / .028/.063 in. 3.3 mm / .130 in. 76_Z-0-2-53 22645337 1/2.67 0.7 mm / .028 in. 2.7 mm / .106 in. 76_Z-0-3-51 22544757 2B 1.6 mm / .063 in. 5.5 mm / .217 in. 76_Z-0-4-51 22544758 2C 1.6 mm / .063 in. 6.5 mm / .256 in. large crimp tool with interchangeable inserts 1/2A, 2B, 2C, 3D Fig. 1 Fig. 2 H+S type Item no. Description Fig. 75_Z-0-0-1 22543157 tool without inserts 1 76_Z-0-0-15 22543177 tool with various inserts in wooden box (1/2A, 2B, 2C, 3D) 2 386 HUBER+SUHNER Assembly tools TOOL BOXES H+S type Item no. Description 76_Z-0-0-9 22644671 large tool box (empty) 76_Z-0-0-11 22543175 large tool box without tooling but including foam insert for tools and allen key H+S type Item no. Description 75_Z-0-0-2 22543158 press without inserts (for inserts see next page) HUBER+SUHNER Assembly tools 387 Appendix table press with interchangeable inserts interchangeable inserts fitting large crimp tool and table press Square-section (centre contact) Hexagonal section (outer contact) 0.54 mm/.021 in. 3.30 mm / .130 in. 0.7/1.6 mm/.028/.063 in. 3.30 mm / .130 in. 0.7 mm / .028 in. 4.95 mm / .195 in. 1.6 mm / .063 in. 5.50 mm / .217 in. 1.2 mm / .047 in. 5.50 mm / .217 in. 1.6 mm / .063 in. 6.50 mm / .256 in. C 1.22/1.22 1.2 mm / .047 in. 6.50 mm / .256 in. 22543192 8/1.22/1.22 1.2 mm / .047 in. 8.00 mm / .315 in. 22543193 2/8.0 1.6 mm / .063 in. 8.00 mm / .315 in. 76_Z-0-6-1 22649051 3/8.65 2.4 mm / .094 in. 8.65 mm / .341 in. 76_Z-0-6-21 22543194 2/9.75 1.6 mm / .063 in. 9.80 mm / .386 in. 76_Z-0-7-1 22543195 3D 2.4 mm / .094 in. 10.70 mm / .421 in. 76_Z-0-7-7 22543196 2D 1.6 mm / .063 in. 10.70 mm / .421 in. 76_Z-0-7-8 22660322 2.5/D 2.5 mm / .098 in. 10.70 mm / .421 in. 76_Z-0-7-14 22544524 4D 3.3 mm / .130 in. 10.70 mm / .421 in. 76_Z-0-10-14 23002630 12.4 -- 12.40 mm / .488 in. 76_Z-0-0-26 22645880 1/2.67 0.7 mm / .028 in. 2.70 mm / .106 in. H+S type Item no. Size 76_Z-0-1-2 23000885 0.54/A 76_Z-0-2-1 22543181 1/2 A 76_Z-0-2-8 22544191 1/4.95 76_Z-0-3-1 22543185 2B 76_Z-0-3-9 22641133 B 1.22/1.22 76_Z-0-4-1 22543189 2C 76_Z-0-4-8 22543190 76_Z-0-5-8 76_Z-0-5-21 Colour code red orange yellow violet special inserts and tools for large crimp tool and table press H+S type Item no. Description 76_Z-0-0-1 22543170 cutting insert for cables up to 12 mm/4.72 in. outer diameter 76_Z-0-0-2 22543172 spare bladers for cutting insert (10 pieces per package) 76_Z-0-0-3 22543173 support plate for bench mounting of large crimp tool 388 HUBER+SUHNER Assembly tools TOOL SETS FOR SEMI-RIGID CABLE ASSEMBLING (SOLDER TYPE) The tool sets include a solid wooden storage case. The composition of these sets is as indicated in the list of tools. H+S type Item no. Series Description 74_Z-0-0-70 22544725 SMA includes all tools required for economic and reliable assembling of SMA connectors 74_Z-0-0-71 22641350 N includes all tools required for assembling of N connectors to semi-rigid cables 74_Z-0-0-72 22544747 SMA includes only the minimum of tools required for assembling of SMA connectors SELECTION OF COMMON AND HELPFUL ASSEMBLY TOOLS Tool set 74 Z-0-0for series H+S type Item no. W-no. 74_Z-0-0-10 22543120 W10 74_Z-0-0-14 22543124 W14 SMA locator tools for contact and insulators F 74_Z-0-0-21 22543130 W21 SMA torque wrench 1 Nm F 74_Z-0-0-24 22543133 SMA tap drill for SMA (1/4-36 UNS-2B thread) 74_Z-0-0-29 22543138 N dielectric insertion tool for insulators series N 70 71 72 "Soldomat" soldering device for center contacts F F HUBER+SUHNER Assembly tools 389 Appendix W29 Description Tool set 74 Z-0-0H+S type Item no. W-no. for series 74_Z-0-0-35 22544282 W35 N soldering gauge 0.45 mm / .018 in. 74_Z-0-0-52 22544553 W52 SMA dielectric insertion tool for SMA-plugs F F 74_Z-0-0-53 22544554 W53 SMA dielectric insertion tool for SMA-jacks F F 74_Z-0-0-54 22544555 W54 SMA contact holder for pins and sockets F F 74_Z-0-0-55 22544516 W55 SMA F F 74_Z-0-0-56 22544517 W56 SMA soldering gauge 0.25 mm / .010 in. soldering gauge 0.4 mm / .016 in. F F 74_Z-0-0-58 22544557 W58 BMA, SK, N SMA soldering fixture (works with W374) F F F 74_Z-0-0-59 22544558 W59 BMA N SMA inserts for EZ 141 (works with W58 and W442) F F F 74_Z-0-0-60 22544559 W60 BMA N SMA inserts for EZ 86 (works with W58 and W442) F F F 74_Z-0-0-61 22544560 W61 SMA locator tool (works with W58 and W442) 74_Z-0-0-62 22544561 W62 SMA locator tool for SMAplugs without pin (works with W58 and W442) 74_Z-0-0-63 22544562 W63 SMA trim tool for SMAplugs without pin 74_Z-0-0-66 22544616 W66 N locator tool (works with W58 and W442) F 74_Z-0-0-67 22544640 W67 N contact holder for pins and sockets series N F 390 Description 70 71 72 F F HUBER+SUHNER Assembly tools Tool set 74 Z-0-0Item no. W-no. 74_Z-0-0-68 22544715 W68 74_Z-0-0-73 22544688 W73 74_Z-0-0-75 22544807 W75 74_Z-0-0-81 22641423 74_Z-0-0-142 22643462 74_Z-0-0-157 22643029 for series BMA SK, N SMA Description 70 71 72 1 set of blades with protector F F F F adaptor SK SMA assembly tool for hermetic jacks SK SMA positioner for assembly of coupling nuts F W142 SMA rebore tool F W157 BMA SK, N SMA cable stripping jig for EZ 47, EZ 86, EZ 141, SUCOFORM 86 and 141 F F F replacement cutting wheels; set for EZ 47, EZ 86, EZ 141 (works with W157) F F F trim tool for centre contacts F F 74_Z-0-0-160 22643514 74_Z-0-0-164 22643028 74_Z-0-0-196 74_Z-0-0-197 74_Z-0-0-198 22645359 22645360 22645361 replacement support cover for EZ 47 EZ 86 EZ 141 (works with W 157) 74_Z-0-0-207 74_Z-0-0-208 22645363 22645362 replacement cutting weels for EZ 47 EZ 86 EZ 141 (works with W157) 74_Z-0-0-209 22645585 W209 BMA locator tool used with W58 and W442 (for BMA plug) 74_Z-0-0-210 22645586 W210 BMA locator tool used with W58 and W442 (for BMA jack) 74_Z-0-0-213 22645593 W213 BMA removal tool for receptacles with snap-in mechanism 74_Z-0-0-231 22646131 W231 SK locator tool for SKplugs (works with W58 and W442) W164 BMA N SMA F HUBER+SUHNER Assembly tools 391 Appendix H+S type Tool set 74 Z-0-0H+S type Item no. W-no. for series 74_Z-0-0-232 22646132 W232 SK locator tool for SKjacks (works with W58 and W442) 74_Z-0-0-233 22646133 W233 SK inserts for semi-rigid cable EZ 118 (works with W58 and W442) 74_Z-0-0-234 22646134 W234 SK replacement cutting wheels for EZ 118 (works with W157) Description 70 71 72 74_Z-0-0-246 22646873 W246 SMA jacket remover for semi-rigid and Sucoform cables. After cutting and breaking of jacket with tool W-157, remove separated piece with tool W-246. 74_Z-0-0-264 22646290 W264 SK trim tool for centre conductor of semi-rigid cable EZ 118 74_Z-0-0-265 22646291 W265 SK spare blade for W264 74_Z-0-0-270 22648901 W270 1.0/ 2.3 removal tool for 1.0/2.3 inserts 74_Z-0-0-368 23021264 W368 SMA locator tool for SMA female (works with W58 and W442) F F 74_Z-0-0-369 23021266 W369 SMA locator tool for SMA male (works with W58 and W442) F F 74_Z-0-0-374 23022146 W374 BMA SK SMA N support for soldering fixture (works with W58 and W442) 392 HUBER+SUHNER Assembly tools Tool set 74 Z-0-0- 74_Z-0-0-375 Item no. 23022145 W-no. for series Description W375 BMA SK SMA N soldering fixture for centre contacts (works with W374) collecting tank for coolant or flux (works with W374) 74_Z-0-0-441 23024586 W441 BMA SK SMA N 74_Z-0-0-442 23024588 W442 BMA SK SMA N soldering fixture (works with W374) 74_Z-0-0-443 23024584 W443 BMA SK SMA N for positioning locator tools (works with W442) 74_Z-0-3-2 22543148 W3-2 SMA N stripping gauge for insulation EZ 141 74_Z-0-3-4 22543150 W3-4 N trim tool for EZ 141 70 71 F F 72 F HUBER+SUHNER Assembly tools 393 Appendix H+S type ASSEMBLY TOOLS FOR BMA CONNECTORS WITH HERMETIC SEAL H+S type Item no. W-no. Description 74_Z-0-0-211 22645591 soldering fixture for hermetic seal (12_BMA-50-0-3 and 22_BMA-50-0-3) 74_Z-0-0-214 22645579 torque wrench (box spanner) torque 2.00 Nm, 8 mm hex. 74_Z-0-0-215 22645580 screw driver for 12_BMA-50-0-3 to use with 74_Z-0-0-214 ASSEMBLY TOOLS FOR SK CONNECTORS H+S type Item no. W-no. Description 74_Z-0-0-226 22646136 W226 soldering fixture for glass bead 74_Z-0-0-227 22646137 W227 soldering fixture for glass bead 74_Z-0-0-228 22646138 W228 assembling tool for dielectric bead 74_Z-0-0-230 22646130 W230 step drill (only if sliding contacts are not used) 74_Z-0-0-235 22646135 W235 step drill (only if sliding contacts are used) 394 HUBER+SUHNER Assembly tools SPANNERS H+S type Item no. Opening 74_Z-0-0-1 22543111 3/8" 74_Z-0-0-2 22543112 11.0 mm / .433 in. 74_Z-0-0-3 22543113 16.0 mm / .630 in. 74_Z-0-0-16 22543126 8.0 mm / .315 in. 74_Z-0-0-17 22644234 1/4" (6.35 mm / .250 in.) 74_Z-0-0-18 22543127 9.0 mm / .354 in. 74_Z-0-0-19 22543128 5.5 mm / .217 in. 74_Z-0-0-37 22543732 13.0 mm / .512 in. 74_Z-0-0-38 22543733 7.0 mm / .276 in. TORQUE WRENCHES torque wrench (standard style) H+S type Item no. for series Torque Opening Notes 74_Z-0-0-21 22543130 SMA / PC 3.5 1.00 Nm 8.0 mm/.315 in standard style 74_Z-0-0-45 22544232 SMC 0.35 Nm 6.0 mm/.236 in. standard style 74_Z-0-0-77 22544820 SMA 1.00 Nm 8.0 mm/.315 in. box-spanner 74_Z-0-0-78 22641379 SMA economic 0.45 Nm 8.0 mm/.315 in. box-spanner 74_Z-0-0-79 22642374 SMA economic 0.45 Nm 8.0 mm/.315 in. standard style 74_Z-0-0-80 22544821 SMA hermetic 1.95 Nm 7.0 mm/.276 in. standard style 74_Z-0-0-147 22644235 SMC 0.35 Nm 6.0 mm/.236 in. box-spanner 74_Z-0-0-174 22643898 SK 1.30 Nm 8.0 mm/.315 in. standard style 74_Z-0-0-189 22644368 SK hermetic 2.00 Nm 8.0 mm/.315 in. standard style 74_Z-0-0-192 22645084 TNC 1.00 Nm 15.0 mm/.591 in. standard style 74_Z-0-0-193 22645085 N 1.00 Nm 20.0 mm/.787 in. standard style 74_Z-0-0-321 22651994 N 1.00 Nm 19.0 mm/.748 in. standard style 74_Z-0-0-373 23021864 TNC 1.00 Nm 14.0 mm/.551 in. standard style HUBER+SUHNER Assembly tools 395 Appendix box-spanner COMBINATION TOOL FOR MMBX/MMCX/MCX-RIGHT ANGLE CONNECTORS for protective cap mounting and decoupling H+S type Item no. Description 74_Z-0-0-30 22543139 assembly tool for 16_MCX and MMBX right angle connectors (decoupling and cap mounting) 74_Z-0-0-225 22645861 16_MMCX-50-1-1, 16_MMCX-50-1-2, 16_MMCX-50-2-1 (decoupling and cap mounting) 74_Z-0-0-272 22648614 all 11_MMCX- and 16_MMCX-connectors (decoupling and cap mounting) 74_Z-0-0-276 22648710 decoupling tool for bulkhead jacks (MCX 75 :) 74_Z-0-0-350 23004135 removal tool (16_MMCX) SPECIAL TOOLS FOR QMA CONNECTORS decoupling tool for high density applications H+S type Item no. W-no. Description 74_Z-0-0-459 84032400 W459 decoupling tool for high density application (for QMA and QN) H+S type Item no. W-no. for series Description 74_Z-0-0-360 23023444 W360 QMA locator tools for QMA connectors (suitable for semi-rigid cables) assembly tool 396 HUBER+SUHNER Assembly tools SPECIAL TOOLS FOR QN CONNECTORS decoupling tool H+S type Item no. W-no. for series Description 74_Z-0-0-459 84032400 W459 QN / QMA decoupling tool for high density application H+S type Item no. W-no. for series Description 74_Z-0-0-390 23035218 W390 QN locator tool for 11 QN and 16 QN connectors (works with W58 and W442) H+S type Item no. W-no. for series Description 74_Z-0-0-391 23035220 W391 QN locator tool for 24 QN connectors (works with W58 and W442) H+S type Item no. W-no. for series Description 74_Z-0-0-555_---_E 84020011 W555 MMPX decoupling tool (distance washers included) 74_Z-0-0-556_---_E 84031617 W556 MMPX distance washers (for replacement) locator tool locator tool HUBER+SUHNER Assembly tools 397 Appendix decoupling tool for MMPX TAP DRILL H+S type Item no. Thread 74_Z-0-0-24 22543133 1/4-36 UNS-2B 74_Z-0-0-82 22643835 3/8-32 UNEF-2B 74_Z-0-0-229 22646139 1/4-36 UNS (for blind hole threads) 74_Z-0-0-236 22646069 2-56 UNC 74_Z-0-0-237 22646070 10-56 UNS 74_Z-0-0-238 22646071 5/8-24 UNEF VARIOUS TOOLS H+S type Item no. Description 74_Z-0-0-12 22642718 small saw 74_Z-0-0-13 22644241 replacement saw blade for 74 Z-0-0-12 74_Z-0-0-25 22543134 face spanner for fastening nut (22 + 24 QLA) 74_Z-0-0-89 22644721 screw driver for female centre contacts (Series 7/16) 74_Z-0-0-115 22642492 syringe for casting compound 74_Z-0-0-116 22642493 casting compound (resin 6.75 cm3 and accelerator 3.0 cm3), 2 containers 74_Z-0-0-177 22644541 cover insertion tool for 16 SMB/C/S connectors 398 HUBER+SUHNER Assembly tools TOOLS FOR HUBER+SUHNER QUICK-FIT CONNECTORS cable stripping tools for easy cable preparation in one single operation (can be used manually or with electrical power tool) H+S type Item no. Cable type Assembly instructions 74_Z-0-8-15 23000296 3/8": Andrew LDF 2-50 SUCOFEED, 0000180713 74_Z-0-9-15 23001006 1/2" Highflex: 74_Z-0-12-15 23000319 1/2": SUCOFEED, Andrew, NK cables, RFS (Kabelmetal) Andrew, NK cables, RFS (Kabelmetal) SUCOFEED, 0000179418/ 0000201603 0000179113 74_Z-0-23-16 23007928 7/8": Andrew, NK cables, RFS (Kabelmetal) 7/8" Highflex: SUCOFEED, Andrew 0000180164/ 0000201645 0000233737 74_Z-0-23-17 84017918 7/8" Low attenuation: SUCOFEED, Andrew 0000243692/0000236366 74_Z-0-32-14 23010533 1 1/4": SUCOFEED, Andrew, NK cables, RFS (Kabelmetal) 74_Z-0-42-14 23010534 1 5/ 8": SUCOFEED, Andrew, NK cables, RFS (Kabelmetal) 0000179128 0000179128 HUBER+SUHNER QUICK-FIT installation kit Tool kit for all QUICK-FIT Connectors (with additional space for other auxiliary tools and spare parts) H+S type Item no. Description Content Size 74_Z-0-0-600 23002174 tool box all tools of the following table marked with * 620430140 mm/ 24.4171.5 in. HUBER+SUHNER Assembly tools 399 Appendix Stripping tools can be accomodated but are not included Overview necessary tools for the assembly of QUICK-FIT connectors Corrugated copper tube cables 3/ Item no. Part description 74_Z-0-8-15 23000296 stripping tool (3/8" LFD 2-50) 74_Z-0-9-15 23001006 stripping tool (1/2" HF) 74_Z-0-12-15 23000319 stripping tool (1/2") 74_Z-0-23-16 74_Z-0-23-17 74_Z-0-32-14 23007928 84017918 23010533 8" LFD 2-50 H+S type 1/ 2" HF 1/ 2" 7/ 8" 7/ 8" HF 7/ 8" stripping tool 8" + stripping tool (7/ 8" LA) stripping tool (1_1/ 4") (1_5/ X X 7/ 8") 8" 74_Z-0-42-14 23010534 stripping tool 74_Z-0-0-359 23014976 handle (for stripping tools) 74_Z-0-0-402 22652193 74_Z-0-0-424 HF) optional optional optional optional optional X4) X4) X4) * abrasive paper 320 X X X 23001952 * spanner AF 17 mm X 74_Z-0-0-425 23001953 * spanner AF 18 mm X 74_Z-0-0-426 23001954 * spanner AF 19 mm X 74_Z-0-0-427 23001955 * spanner AF 21 mm X 74_Z-0-0-428 23001956 * spanner AF 22 mm 74_Z-0-0-429 23001957 * spanner AF 24 mm 74_Z-0-0-430 23001958 74_Z-0-0-431 23001959 optional optional optional * spanner AF 30 mm X X X * spanner AF 36 mm X X X X1) X1) X X X X2) 22652206 * counter sink 74_Z-0-0-418 22652209 * Stanley knife 74_Z-0-0-420 22652211 * steel brush 74_Z-0-0-422 22652213 * steel measure 200 mm 74_Z-0-0-432 23002005 * screw driver (2) 74_Z-0-0-433 23002007 * screw driver (4) 74_Z-0-0-12 22642718 small metal saw 74_Z-0-0-434 23002166 monkey wrench 3) (min.65mm) optional optional X1) X1) X1) X X X X X X X X X X2) X2) X2) X2) X2) X X X X X X X X X X X X X X X X X X X2) X2) X X X2) small file X X X2) X X2) * = tools included in the HUBER+SUHNER QUICK-FIT installation kit 74_Z-0-0-600, (can be ordered with item no. 23002174) 1) for assembly use either the Stanley knife or the counter sink 2) only necessary without HUBER+SUHNER stripping tool 3) 2 wrenches are needed for assembling 4) handle included in QUICK-FIT stripping tool delivery 400 1 5/8" X (7/ 74_Z-0-0-415 1 1/4" LA HUBER+SUHNER Assembly tools Spare parts for QUICK-FIT cable stripping tools H+S type Item no. Description Application Function 74_Z-0-0-346 23000936 blade 74_Z-0-8-15 74_Z-0-8-16 74_Z-0--9-15 74_Z-0-12-15 stripping jacket 74_Z-0-0-347 23000937 blade 74_Z-0-8-15 74_Z-0-8-16 74_Z-0-12-15 cutting corrugated copper tube deburring inner conductor 74_Z-0-0-348 23000938 triangle knife 74_Z-0-8-15 74_Z-0-8-16 74_Z-0-9-15 74_Z-0-12-15 74_Z-0-0-349 23001008 blade 74_Z-0-9-15 cutting corrugated copper tube 74_Z-0-0-297 22650531 blade 74_Z-0-23-16 74_Z-0-23-17 cutting corrugated copper, foam and inner conductor 74_Z-0-0-355 23008264 blade 74_Z-0-23-16 74_Z-0-32-14 74_Z-0-32-17 stripping jacket 74_Z-0-0-356 23010537 blade 74_Z-0-42-14 stripping jacket Additional tools for HUBER+SUHNER QUICK-FIT cable stripping tools H+S type Item no. Tool description Function 74_Z-0-0-416 22652207 * allen wrench AF 2.5 mm/.098 in. spare blades for the stripping tools 74_Z-0-8-15, 74_Z-0-8-16, 74_Z-0-9-15, 74_Z-0-12-15, 74_Z-0-23-16, 74_Z-0-23-17, 74_Z-0-32-14 and 74_Z-0-42-14 74_Z-0-0-423 23000311 * allen wrench AF 4 mm/.157 in. for removing the BIT adaptor 74_Z-0-0-421 22652212 * screwdriver, Torx 1 (Torx T7) for changing the triangle knife 74_Z-0-0-348 HUBER+SUHNER Assembly tools 401 Appendix * = not included in the HUBER+SUHNER QUICK-FIT installation kit 74_Z-0-0-600