COMMERCIAL AND MILITARY GRADES
SUBMINIATURE
PUSHBUTTONS
P7
66 OTTO 2007 Full Line Catalog Specifications Subject To Change Without Notice
®
The P7 series incorporates OTTO’s patented double-break design in a
significantly smaller package than the P1 series. These subminiature
switches allow the switch density todays technologies require in
control grips and panels.
The long life snap-action design is protected from the environment by
asilicon rubber boot, operating on a “rolling sleeve principle that
gives long sealed life and smooth operation.
The P7 series is designed to meet the requirements of MIL-S-8805
including low level switching (10 mA @ 30 mV) with power switching
up to 5 amps at 28 VDC as well.
A variety of mounting styles are offered to best match the
application. The P7-1, P7-2, P7-7, and P7-8 Case Styles feature a
swaged bushing shape to allow press-fit installation in aircraft flight
control and hand grips and similar applications. The other series
featurethreaded bushing mounting. The P7-3 Case Style has a front
panel bezel while the P7-5 and P7-6 have conventional bushings for
rear panel mounted installations. Silver or black bezels are standard.
Othercolors available on special order.
Pushbuttons are available in a choice of nine colors. Excellent tactile
feedback assures the operator that contact transfer had been made.
A choice of MIL-SPEC and commercial versions of these switches are
offered: Moistureproof and dusttight to IP64 and MIL-PRF-8805
Design 2. Watertight to IP68. Watertight to MIL-PRF-8805 Design 3.
Consult the ordering code to specify.
QualityFeatures:
Low level switching capability
Low contact resistance: .025 ohms max
High contact pressure
Six circuit variations
Positive tactile feedback
Variety of mounting styles
Sealed against dust and moisture
Qualified toMIL-PRF-8805/110
Watertight IP68 available
SEALED SUB-SUBMINIATURE PUSHBUTTON SNAP-ACTION SWITCHES
Standard Characteristics/Ratings:
ELECTRICAL: (at 28 VDC or 115 VAC, 60/400 Hz.)
LOAD SINGLE CIRCUIT 2-CIRCUIT
Resistive 5 Amps 4 Amps
Inductive 3 Amps 2 Amps
Lamp 2 Amps
Low LevelOption: 30 mV @10ma. for 25,000 cycles
MATERIALS:
Case: Aluminum alloy, anodized
Button: Thermoplastic
Seal: Internal silicone rubber
Terminals: The terminals are suitable for soldering
OPERATIONAL:
Operating Force: 1.7 lbs. ±.5 lbs.
Also available 12oz. ±4oz.. on special order
Mechanical Life: 1,000,000 cycles
Electrical Life: 25,000 cycles
Dielectric Withstanding: 1050 Vrms.
Temperature Range: -55°C to +85°C
MINI SIZED PER MIL-PRF-8805/110 SUBMINIATURE
PUSHBUTTONS
P7
Specifications Subject To Change Without Notice www.ottoexcellence.com 67
PUSHBUTTONS
P7 PART NUMBER CODE
P7 X X X X X X
Case Terminal Style/ Circuit Contact Bezel Color Button
Style Construction Grade Form Rating Button Dia. Color
1. Style 1 0. Special1. N.O. 1. Standard 1. Clear–Standard 1. Red
2. Style 2 A. Standard Commercial Solder 2. N.C. 2. Low Level 2. Black–Standard 2. Black
3. Style 3 B.StandardWatertight Commercial Solder 3. N.C.3-T
erminal 3. Clear–.3123. Orange
5.Style 5 1.Solder/Military/Short 4. N.O.3-Terminal 4. Black–.3124. Y
ellow
6. Style 6 2. Solder/Commercial/Short 5. 5-Terminal 5. Green
7
.Style 7 3. Solder/Mil.Watertight/Short 6. Two Circuit6. Blue
8. Style 8 4. P.C. Pin/Commercial 7. Purple
5. P.C. Pin/Military 8. Gray
6. P
.C. Pin/MIL Watertight 9.White
7. Solder/Com. Watertight/Short
8. P.C. Pin/Com. Watertight
P7-1 Series
Case Style 1
Press-fit Mount
Also available with
P.C. terminals.
P7-2 Series
Case Style 2
Press-fit Mount
Also available with
P.C. pins.
P7-6 Series
Case Style 6
15/32"
Threaded
Bushing
Also available with
P
.C. pins.
P7-7 Series
Case Style 7
Press-fit
Mount
Also available with
P.C. pins.
P7-3 Series
Case Style 3
Bezel/Threaded
Bushing
Also available with
P.C. pins.
P7-5 Series
Case Style 5
1/4" Threaded
Bushing
Also available with
P. C . p i n s .
P7-8 Series
Case Style 8
Press-fit Mount
Guarded Button
Also available with
P. C . p i n s .
Terminal
Style
“A & B
Standard
Specials are serialized. Subsequent numerals do not specify standard features.
Not available with Case Style 1, 2 and 5.
A
P
.C. Pin
Mounting
Pattern
(As viewed from
switch bottom.
See above drawings
for terminal
identification.)
SEALED AGAINST DUST AND MOISTURE, LOW LEVEL SWITCHING OPTION
SPECIAL PURPOSE DESIGNS
SPECIAL
PUSHBUTTONS
P7
68 OTTO 2007 Full Line Catalog Specifications Subject To Change Without Notice
EXAMPLES OF CUSTOMIZED P7 SEALED PUSHBUTTONS
Special Longer Length Button
Panel seal gasket and watertight enclosure. Button is
black nylon. Bezel is black anodized aluminum alloy.
Available in two versions:
Actuation OTTO Part Number
Momentary P7-500001
Push-Pull Maintained P7-500017
Special Large Button, Press Fit
Available with a .375" dia. button with three color options.
Color OTTO Part Number
Red P7-900001
Black P7-900002
White P7-900009
Contact Factory for additional button color options
Special Snap-On Button, Wire leads
Features changeable snap-on button caps available
in two diameters and in a range of colors. Switch is
splash-proof sealed per MIL-S-8805 and is supplied
with a silicone panel gasket.
Part Number: P7-500018
Button Color .440" Dia. .375" Dia.
Red 400725-1 400723-1
Black 400725-2 400723-2
Orange 400725-3 400723-3
White 400725-9 400723-9
Contact factory for additional button color options
P7-500001, P7-500017,
Momentary Push-Pull