HYR -2001 - General Application
Specifications/Dimensions
1. C: Center gap O: Off center gap
2. Breakdown voltage specifications are based on Pull -In sensitivity of 25 AT
or higher. Contact ALEPH for information for switches with less than 25 AT
sensitivity. HYR4000, HYR5000, HYR9000 Series are specified on basis of
the lowest AT Pull -In sensitivity range.
3. High IR model is available. Specify P/N HYR2010
Item Value
Contact Form 1A
Contact Position 1C
Contact Material Rhodium
Max. Contact Rating 10W
Max. Switching Voltage 200VDC
Max. Switching current 0.5A
Max. Initial Contact Resistance 100mW
Pull in Value (AT) 15-50
Min. Drop out Value (AT) 6
Min. Breakdown Voltage 2300VDC
Max. Contact Capacitance 0.4pF
Min. Insulation Resistance 1010 W3
Typ. Resonant Frequency 3kHz
Electrical Life (Resistive loads) 107 (5VDC, 10mA)
106 (100VDC, 100mA)
Features General application
Test Coil - TC- 0502 Test Coil
Number of Turns 5,000
Wire Gauge AWG #40
Coil Resistance 420W
About Aleph | Products | Contact Us
4700 Aircenter Circle | Reno, NV 89502
(775) 827 -8000 | Fax: (775) 827 -8044
© Copyright 1999 - 2009, Aleph America Corporation Site design by Softnet
Print this page E-mail to a friend Home > Products > Reed Switches > Dry Reed Switches > HYR -2001
