2007-12-07 GaAlAs Infrared Emitter GaAs-IR-Lumineszenzdiode Version 1.0 SFH 483 E7800 Features: Besondere Merkmale: * Fabricated in a liquid phase epitaxy process * Anode is electrically connected to the case * Hergestellt im Schmelzepitaxieverfahren * Anode galvanisch mit dem Gehauseboden verbunden * Hohe Zuverlassigkeit * Gute spektrale Anpassung an Si-Fotoempfanger * Gehausegleich mit BPX 63, BP 103, LD 242, SFH 464 * Anwendungsklasse nach DIN 40 040 GQC * High reliability * Matches all Si-Photodetectors * Same package as BPX 63, BP 103, LD 242, SFH 464 * DIN humidity caregory in acc. with DIN 40 040 GQG Applications Anwendungen * Photointerrupters * Sensor technology * Light curtains * Lichtschranken * Sensorik * Lichtgitter Notes Hinweise Depending on the mode of operation, these devices emit highly concentrated non visible infrared light which can be hazardous to the human eye. Products which incorporate these devices have to follow the safety precautions given in IEC 60825-1 and IEC 62471. Je nach Betriebsart emittieren diese Bauteile hochkonzentrierte, nicht sichtbare Infrarot-Strahlung, die gefahrlich fur das menschliche Auge sein kann. Produkte, die diese Bauteile enthalten, mussen gema den Sicherheitsrichtlinien der IEC-Normen 60825-1 und 62471 behandelt werden. 2007-12-07 1 Version 1.0 SFH 483 E7800 Ordering Information Bestellinformation Type: Radiant Intensity Ordering Code Typ: Strahlstarke Bestellnummer IF= 100 mA, tp= 20 ms Ie [mW/sr] SFH 483 L/M E7800 2 ( 1) Note: measured at a solid angle of = 0.01 sr Anm:: gemessen bei einem Raumwinkel = 0.01 sr Q62703Q4755 Maximum Ratings (TC = 25 C) Grenzwerte Parameter Symbol Values Unit Bezeichnung Operation and storage temperature range Betriebs- und Lagertemperatur Symbol Werte Einheit Top; Tstg -40 ... 80 C Reverse voltage Sperrspannung VR 5 V Forward current Durchlassstrom IF 200 mA Surge current Stostrom (tp 10 s, D = 0) IFSM 2.5 A Total power dissipation Verlustleistung Ptot 470 mW Thermal resistance junction - ambient Warmewiderstand Sperrschicht - Umgebung RthJA 450 K/W Thermal resistance junction - case Warmewiderstand Sperrschicht - Gehause RthJC 160 K/W 2007-12-07 2 Version 1.0 SFH 483 E7800 Characteristics (TA = 25 C) Kennwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Emission wavelength Zentrale Emissionswellenlange (IF = 100 mA) peak 880 nm Spectral bandwidth at 50% of Imax Spektrale Bandbreite bei 50% von Imax (IF = 100 mA, tp = 20 ms) 80 nm Half angle Halbwinkel 23 Active chip area Aktive Chipflache A 0.16 mm2 Dimensions of active chip area Abmessungen der aktiven Chipflache LxW 0.4 x 0.4 mm x mm Distance chip surface to lens top Abstand Chipoberflache bis Linsenscheitel H 2.7 ... 2.9 mm Rise and fall times of Ie ( 10% and 90% of Ie max) Schaltzeiten von Ie ( 10% und 90% von Ie max) (IF = 100 mA, RL = 50 ) tr / tf 600 / 500 ns Capacitance Kapazitat (VR = 0 V, f = 1 MHz) C0 25 pF Forward voltage Durchlassspannung (IF = 100 mA, tp = 20 ms) VF 1.5 ( 1.8) V Forward voltage Durchlassspannung (IF = 1 A, tp = 100 s) VF 2.4 ( 3) V Reverse current Sperrstrom (VR = 5 V) IR 0.01 ( 1) A Total radiant flux Gesamtstrahlungsfluss (IF= 100 mA, tp= 20 ms) e 23 mW 2007-12-07 3 Version 1.0 SFH 483 E7800 Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Temperature coefficient of Ie or e Temperaturkoeffizient von Ie bzw. e (IF = 100 mA, tp = 20 ms) TCI -0.5 %/K Temperature coefficient of VF Temperaturkoeffizient von VF (IF = 100 mA, tp = 20 ms) TCV -2.5 mV / K Temperature coefficient of wavelength Temperaturkoeffizient der Wellenlange (IF = 100 mA, tp = 20 ms) TC 0.25 nm / K Grouping (TA = 25 C) Gruppierung Group Min Radiant Intensity Max Radiant Intensity Gruppe Min Strahlstarke Max Strahlstarke IF= 100 mA, tp= 20 ms IF= 100 mA, tp= 20 ms Ie, min [mW / sr] Ie, max [mW / sr] SFH 483-L E7800 1 2 SFH 483-M E7800 1.6 3.2 Note: An aperture is used in front of the component for measurement of the radiant intensity and the half angle (diameter of the aperture: 1.1 mm; distance of aperture to case back side: 4.0 mm). This ensures that solely the radiation in axial direction emitting directly from the chip surface will be evaluated during measurement of the radiant intensity. Radiation reflected by the bottom plate (stray radiation) will not be evaluated. These reflections impair the projection of the chip surface by additional optics (e.g. long-range light reflection switches). In respect of the application of the component, these reflections are generally suppressed by apertures as well. This measuring procedure corresponding with the application provides more useful values. This aperture measurement is denoted by "E 7800" added to the type designation. Die Messung der Strahlstarke und des Halbwinkels erfolgt mit einer Lochblende vor dem Bauteil (Durchmesser der Lochblende: 1,1 mm; Abstand Lochblende zu Gehauseruckseite: 4,0 mm). Dadurch wird sichergestellt, dass bei der Strahlstarkemessung nur diejenige Strahlung in Achsrichtung bewertet wird, die direkt von der Chipoberflache austritt. Von der Bodenplatte reflektierte Strahlung (vagabundierende Strahlung) wird dagegen nicht bewertet. Diese Reflexionen sind besonders bei Abbildungen der Chipoberflache uber Zusatzoptiken storend (z. B. Lichtschranken groer Reichweite). In der Anwendung werden im allgemeinen diese Reflexionen ebenfalls durch Blenden unterdruckt. Durch dieses der Anwendung entsprechende Messverfahren ergibt sich fur die Anwender eine besser verwertbare Groe. Diese Lochblendenmessung ist gekennzeichnet durch den Eintrag "E 7800", der an die Typenbezeichnung angehangt ist. 2007-12-07 4 Version 1.0 SFH 483 E7800 Relative Spectral Emission Relative spektrale Emission Radiant Intensity Strahlstarke Ie / Ie(100 mA) = f(I F), single pulse, tp = 25 s, TA= 25C Irel = f(), TA = 25C OHR00877 100 OHR00878 10 2 rel % e e (100mA) 80 10 1 60 10 0 40 10 -1 20 0 750 2007-12-07 10 -2 800 850 900 10 -3 950 nm 1000 5 10 0 10 1 10 2 10 3 mA 10 4 F Version 1.0 SFH 483 E7800 Forward Current Durchlassstrom IF = f(VF), single pulse, tp = 100 s, TA= 25C Max. Permissible Forward Current Max. zulassiger Durchlassstrom IF, max = f(TA) OHR00946 240 OHR01173 10 1 F mA F 200 10 0 R thJC = 160 K/W 160 A 10 -1 120 R thJA = 450 K/W 80 10 -2 40 0 10 -3 0 20 40 60 80 C 100 T A, T C OHR00948 tp F mA 5 D= tp T D = 0.005 0.01 0.02 F T 0.05 10 3 0.1 0.2 5 0.5 DC 10 2007-12-07 2 10 -5 10 -4 10 -3 10 -2 1 2 3 4 5 VF Permissible Pulse Handling Capability Zulassige Pulsbelastbarkeit IF = f(tp), TA = 25 C, duty cycle D = parameter 10 4 0 10 -1 s 10 0 tp 6 Version 1.0 SFH 483 E7800 Radiation Characteristics Abstrahlcharakteristik Irel = f() 40 30 20 0 10 OHR01457 1.0 50 0.8 60 0.6 70 0.4 0.2 80 0 90 100 1.0 0.8 0.6 0.4 0 20 40 60 80 Package Outline Mazeichnung 1 o4.1 (0.161) o0.45 (0.018) 2.54 (0.100) spacing 3) .04 5) (0 3 .1 1 (0.0 .0 9 Chip position o4.3 (0.169) 2.7 (0.106) 2 14.5 (0.571) 3.6 (0.142) 12.5 (0.492) 3.0 (0.118) 1.1 0.9 (0. (0 043 .03 ) 5) o5.5 (0.217) o5.2 (0.205) GETY6625 Dimensions in mm (inch). / Mae in mm (inch). 2007-12-07 7 100 120 Version 1.0 SFH 483 E7800 Pinning Anschlussbelegung Pin Description Anschluss Beschreibung 1 Cathode / Kathode 2 Anode / Anode Package Metal Can (TO-18), hermetically sealed, Epoxy, transparent Gehause Metall Gehause (TO-18), hermetisch dicht, Harz, durchsichtig TTW Soldering Wellenloten (TTW) IEC-61760-1 TTW / IEC-61760-1 TTW OHLY0598 300 C T 10 s 250 Normalkurve standard curve 235 C ... 260 C Grenzkurven limit curves 2. Welle 2. wave 200 1. Welle 1. wave 150 ca 200 K/s 2 K/s 5 K/s 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling 0 0 50 100 150 200 t 2007-12-07 8 s 250 Version 1.0 SFH 483 E7800 Disclaimer Disclaimer Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components* may only be used in life-support devices** or systems with the express written approval of OSRAM OS. Bitte beachten! Lieferbedingungen und Anderungen im Design vorbehalten. Aufgrund technischer Anforderungen konnen die Bauteile Gefahrstoffe enthalten. Fur weitere Informationen zu gewunschten Bauteilen, wenden Sie sich bitte an unseren Vertrieb. Falls Sie dieses Datenblatt ausgedruckt oder heruntergeladen haben, finden Sie die aktuellste Version im Internet. Verpackung Benutzen Sie bitte die Ihnen bekannten Recyclingwege. Wenn diese nicht bekannt sein sollten, wenden Sie sich bitte an das nachstgelegene Vertriebsburo. Wir nehmen das Verpackungsmaterial zuruck, falls dies vereinbart wurde und das Material sortiert ist. Sie tragen die Transportkosten. Fur Verpackungsmaterial, das unsortiert an uns zuruckgeschickt wird oder das wir nicht annehmen mussen, stellen wir Ihnen die anfallenden Kosten in Rechnung. Bauteile, die in lebenserhaltenden Apparaten und Systemen eingesetzt werden, mussen fur diese Zwecke ausdrucklich zugelassen sein! Kritische Bauteile* durfen in lebenserhaltenden Apparaten und Systemen** nur dann eingesetzt werden, wenn ein schriftliches Einverstandnis von OSRAM OS vorliegt. *) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. **) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered. *) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. **) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls Sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. 2007-12-07 9 Version 1.0 SFH 483 E7800 Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 2007-12-07 10