SL300 thru SL 1200
NOTES:
FAST RECOVERY, 100ns.HIGH VOLTAGE
40 ma, MINIATURE RECTIFIERS
EDI
Type
PRV
Volts
SL300 3,000
SL500 5,000
SL800 8,000
SL1000 10,000
SL1200 12,000
Average Rectified Forward Current @ 50
oC, IO
Max. Peak Surge Current, IFSM
Max. Forward Voltage Drop @ 25 mA, VF
Max. DC Reverse Current @ PRV and 25
oC, IR
Max. DC Reverse Current @ PRV and100oC, IR
Ambient Operating Temperature Range, T
A
Storage Temperature Range, T
STG
40 mA
3 Amp
26Volts
1
15
-55 oC to +150 oC
-55 oC to +150 oC
A
A
(8.3ms) (Fig.2)
rr 100nanosec
1 INCH MINIMUM LEADS
SMALL SIZE MOLDED PACKAGE
PRV 3,000 TO 12,000 VOLTS
AVALANCHE CHARACTERISTICS
LOW LEAKAGE
Max. Reverse Recovery (Fig.4) t
1.It is recommended that a proper heat sink be used on the terminals of this device between the body and
soldering point to prevent damage from excess heat.
2.If operated over 10,000v/inch in length, devices should be immersed in oil or re - encapsulated.
EDI reserves the right to change these specifications at any time without notice.
ELECTRICAL CHARACTERISTICS (at TA=25 C Unless Otherwise Specified)
o
100
75
50
25
0
0 25 50 75 100 125 150
FIG.1
OUTPUT CURRENT vs AMBIENT TEMPERATURE
FIG.2
NON- REPETITIVE SURGE CURRENT
0.1SEC 1.0SEC
100
75
50
25
0
1 2 345
6
7 9 10 20 30 40 50 608
CYCLES(60 Hz)
SL300 thru SL1200
FIG.3
21 GRAY OAKS AVENUE * YONKERS. NEW YORK 10710 914-965-4400 * FAX 914-965-5531 * 1-800-678-0828
ELECTRONIC DEVICES, INC. DESIGNERS AND MANUFACTURERS OF SOLID STATE DEVICES SINCE 1951.
AMBIENT TEMPERATURE O
( C)
% MAXIMUM SURGE
REVERSE RECOVERY TEST METHOD
LEAD-SOLDER DIPPED COPPER
MARKING:CATHODE BAND
AND DEVICE TYPE
FIG.4
RECOVERY WAVE FORM RECOVERY WA VE FORM
IF=2MA
rr
D.U.T.
SCOPE
50
N I
N I
IR=5MA
T
IRR=1MA
WAVE FORMS
PULSE
GENERATOR
CIRCUIT
1000
0.1
MECHANICAL
Ee-mail:sales@edidiodes.com Wwebsite: http://www.edidiodes.com
*
.125 Dia.
.400
.021 Dia.
1.0Min Both Ends
% RATED FWD CURRENT
+
-
