EMC filters Series/Type: B84776*A000 Date: November 2012 (c) EPCOS AG 2012. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. 2-line filters B84776*A000 IEC inlet filters Power line filters for 1-phase systems Rated voltage 250 V AC/DC Rated current 1 A to 10 A Construction 2-line filter with IEC connector, fuse holder and switch Appliance connector according to IEC/EN 60320-1 Fuse holder for 2 fuses 5 x 20 mm Metal case 2-pole rocker switch Versions Standard version (B84776A*) Medical version with low leakage current (B84776M*) Features Easy to install Compact design Cost optimized construction Degree of protection from front side IP 401) UL and cUL approval obtained ENEC 10 approval is pending Applications Switched-mode power supplies for industrial electronics telecom systems data systems DC applications Measuring instruments Medical engineering Terminals Line side: IEC inlet C14 according to IEC/EN 60320-1 Load side: Tab connectors 6.3 x 0.8 mm Marking Marking on component: Manufacturer's logo, ordering code, rated voltage, rated current, rated temperature, climatic category, date code Minimum data on packaging: Manufacturer's logo, ordering code, quantity, date code 1) To IEC 60529 Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 10 2-line filters B84776*A000 IEC inlet filters Typical circuit diagram of B84776A*A000 (standard version) Typical circuit diagram of B84776M*A000(medical version) Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 10 2-line filters B84776*A000 IEC inlet filters Technical data and measuring conditions of B84776*A000 Rated voltage Rated frequency Test voltage line to line for 2 s Test voltage line to case for 2 s (B84776A*) Test voltage line to case for 2 s (B84776M*) Rated temperature Climatic category (IEC 60068-1) Rocker switch VR fR Vtest Vtest Vtest 250 50/60 760 2000 2500 V DC/AC Hz V AC V AC V AC TR 40 25/085/21 C Rating 10 A (1/2 HP) / 250 V AC Inrush current 82 A Electrical life time ON OFF Mechanical life time ON OFF 10000 cycles 50000 cycles Characteristics and ordering codes of B84776*A000 VR = 250 V AC/DC IR A 1 2 4 6 10 CR X2 F CR Y2 pF 1 x 0.22 1 x 0.22 1 x 0.22 1 x 0.22 1 x 0.22 1 x 0.22 1 x 0.22 1 x 0.22 1 x 0.22 1 x 0.22 2 x 2200 2 x 2200 2 x 2200 2 x 2200 2 x 2200 LR Ileak1) mH 2 x 7.6 2 x 7.6 2 x 2.0 2 x 2.0 2 x 1.0 2 x 1.0 2 x 0.46 2 x 0.46 2 x 0.33 2 x 0.33 mA 0.173 0 0.173 0 0.173 0 0.173 0 0.173 0 Rbleed Approx. weight M g 1 90 1 90 1 90 1 90 1 90 1 90 1 90 1 90 1 130 1 130 Ordering code Approvals B84776A0001A000 B84776M0001A000 B84776A0002A000 B84776M0002A000 B84776A0004A000 B84776M0004A000 B84776A0006A000 B84776M0006A000 B84776A0010A000 B84776M0010A000 P P P P P P P P P P x x x x x x x x x x x x x x x x x x x x x = approval is granted P = approval is pending 1) Calculation according draft proposal IEC 609391 Ed. 3 (20081029), annex A, "Calculation of leakage current" at 50 Hz. In practice are up to double values to be expected due to the insulation resistance values of the used ceramic capacitors. For the medical version results computationally the value 0. In practice are values 1 ... 2 A to be expected due to the insulation resistance values of the used materials. Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 10 2-line filters B84776*A000 IEC inlet filters Dimensional drawing Dimensions in mm ISO 2768-cl Please read Cautions and warnings and Important notes at the end of this document. Page 5 of 10 2-line filters B84776*A000 IEC inlet filters Insertion loss (typical values at Z = 50 ) Filter for 1 A Filter for 2 A Filter for 4 A Filter for 6 A Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 10 2-line filters B84776*A000 IEC inlet filters Insertion loss (typical values at Z = 50 ) Filter for 10 A Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 10 2-line filters B84776*A000 IEC inlet filters Insertion loss (typical values at Z = 50 ) Filter for 1 A Filter for 2 A Filter for 4 A Filter for 6 A Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 10 2-line filters B84776*A000 IEC inlet filters Insertion loss (typical values at Z = 50 ) Filter for 10 A Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 10 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. Page 10 of 10