SIMATIC Ident RFID system SIMATIC RF690L Smartlabel Compact Operating Instructions Legal information Warning notice system This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are graded according to the degree of danger. DANGER indicates that death or severe personal injury will result if proper precautions are not taken. WARNING indicates that death or severe personal injury may result if proper precautions are not taken. CAUTION indicates that minor personal injury can result if proper precautions are not taken. NOTICE indicates that property damage can result if proper precautions are not taken. If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property damage. Qualified Personnel The product/system described in this documentation may be operated only by personnel qualified for the specific task in accordance with the relevant documentation, in particular its warning notices and safety instructions. Qualified personnel are those who, based on their training and experience, are capable of identifying risks and avoiding potential hazards when working with these products/systems. Proper use of Siemens products Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems. The permissible ambient conditions must be complied with. The information in the relevant documentation must be observed. (c) Siemens AG 2014. All rights reserved C79000-G8976-C364-01, 04/2014 1 1 Characteristics The SIMATIC RF690L High Temp Smartlabel is a passive and maintenance-free data carrier. It operates based on the UHF Class 1 Gen 2 technology and is used to store the "Electronic Product Code" (EPC). The transponder also has a user memory. The SIMATIC RF690L achieves a read distance of up to 4.5 m and can also be mounted on metal. Smartlabel SIMATIC RF690L 1) 2) Features Application Heat-proof UHF label for a wide range of possible applications with high temperatures up to +230 C on metal. Frequency band * * Air interface According to ISO 18000-6C Memory EPC 96... 480 bits 1) user memory: 16 ... 64 bytes 1) Write range * Up to 1.5 m 2) Read range * * Up to 4.5 m on non-metallic surface 2) Up to 2.4 m on metal 2) Mounting Self-adhesive for mounting on metal Europe: 865 ... 868 MHz USA/Canada: 902 ... 928 MHz The EPC memory has a default size of 96 bits. When necessary, the EPC memory size can be expanded to 480 bits in steps of 16 bits at the cost of the user memory. Depending on the environment 2 Ordering data Table 2-1 Ordering data RF690L Article number SIMATIC RF690L (Europe) 6GT2810-2AG00 Delivery package: 400 labels on the roll SIMATIC RF690L (USA, Canada) 6GT2810-2AG10 Delivery package: 400 labels on the roll 2 SIMATIC RF690L Smartlabel C79000-G8976-C364-01, 04/2014 3 Memory organization Transponders with an "Alien Higgs 3" chip have an EPC memory with a standard size of 96 Bits (12 bytes). When necessary, the EPC memory size can be expanded to 480 bits (60 bytes) in steps of 16 bits at the cost of the user memory. The following table shows how many bytes can be added to the EPC memory and how this affects the size of the user memory. Table 3-1 Size of the EPC memory and effect on the user memory EPC memory User memory [bytes] [bits] [bytes] 54 ... 60 432 ... 480 16 46 ... 52 369 ... 416 24 38 ... 44 304 ... 352 32 30 ... 36 240 ... 288 40 22 ... 28 176 ... 224 48 14 ... 20 112 ... 160 56 0 ... 12 0 ... 96 64 4 Technical specifications Table 4-1 Technical specifications of SIMATIC RF690L 6GT2810-2AGx0 Product designation SIMATIC RF690L Memory Chip (manufacturer/type) Alien Higgs 3 Memory configuration * EPC * 96 ... 480 bits 1) * User memory * 16 ... 64 bytes 1) * TID * 12 bytes Type EPC Class 1 Gen 2 Write cycles (typical, at 22 C) > 100 000 MTBF (Mean Time Between Failures) 50 years Mechanical specifications Material Plastic Material surface PEN ungummed, transparent Color Transparent Antenna material Aluminum Type of antenna Dipole Imprint Can be printed using heat transfer technique Roll core diameter 76 mm Roll outer diameter 200 mm Label carrier Siliconized, opaque paper liner (reverse side is not siliconized) SIMATIC RF690L Smartlabel C79000-G8976-C364-01, 04/2014 3 6GT2810-2AGx0 Electrical data Air interface ISO 18000-6C Polarization direction Linear Frequency band * * Europe: 865 ... 868 MHz USA/Canada: 902 ... 928 MHz Writing/reading distance * Write * Up to 1.5 m 2) * Read * * Up to 4.5 m on non-metallic surface 2) Up to 2.4 m on metal 2) * -25 ... +100 C * Above +100 C: 20% reduction in the limit distance * Above +140 : No processing possible * At +230 C: No processing possible; Memory retention tested for 3 cycles each up to 30 minutes; * -25 ... +100 C Permitted ambient conditions Ambient temperature * * During operation During transportation and storage Distance from metal Suitable for direct attachment to metal Degree of protection IP67 Design, dimensions, and weight Europe: 88 x 25 x 1.6 mm USA/Canada: 77 x 25 x 1.6 mm Dimensions (L x W x H) * * Weight Approx. 5 g Type of mounting Single-sided adhesive (self-adhesive labels), acrylate glue 1) 2) 4 The EPC memory has a default size of 96 bits. When necessary, the EPC memory size can be expanded to 480 bits in steps of 16 bits at the cost of the user memory. Depending on the environment SIMATIC RF690L Smartlabel C79000-G8976-C364-01, 04/2014 5 Dimension drawing Figure 5-1 Dimension drawing RF690L (Europe, article number: 6GT2810-2AG00) Figure 5-2 Dimension drawing RF690L (USA/Canada, article number: 6GT2810-2AG10) All dimensions in mm SIMATIC RF690L Smartlabel C79000-G8976-C364-01, 04/2014 5 6 Storage and transportation NOTICE Notes on storage and transportation of rolls Note the following information on the storage and transportation of rolls: * Protect the transponders from direct sunlight and heat (e.g. heating appliances). * Prior to use, store the label rolls in the polyethylene bag or the shrink film of the original packaging. * Store the label rolls in a cool and dry location. Ideal conditions: 18 C 5 C, 40-60 % humidity * Stack several label rolls lying flat and centered one above the other. * Avoid external pressure (e.g. a narrow box). Figure 6-1 Storage of transponders Trademarks All names identified by (R) are registered trademarks of Siemens AG. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner. Disclaimer of Liability We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in this publication is reviewed regularly and any necessary corrections are included in subsequent editions. Siemens AG Industry Sector Postfach 48 48 90026 NURNBERG SIMATIC RF690L Smartlabel C79000-G8976-C364-01, 04/2014 6 SIMATIC RF690L Smartlabel C79000-G8976-C364-01, 04/2014