BURNDY Wedge WEJTAPTM POWER LUG WEJTAPTM POWERLUGTM terminals are made of cast aluminum alloy for termination of ACSR and Aluminum conductors. 4 HOLE POWER LUG 2 HOLE POWER LUG 4 HOLE FLAG F-7 Fig. 2 Fig. 1 TAP GROOVE FOR CONNECTOR SELECTION CATALOG NUMBER 4/0 STANDARD ACSR 336.4 STANDARD ACSR 795 STANDARD ACSR WCAB30R-2N WCAB30R-4N WCBB30R-4N WCAY39R-2N WCAY39R-4N WCBY39R-4N WCAY49R-2N WCAY49R-4N WCBY49R-4N STANDARD CONDUCTOR ACSR ASC/AAC 6 Str. - 266.8 6 Str. - 300 266.8 - 556.5 336.4 - 636 605 - 1033.5 715.5 - 1113 Fig. 3 FIGURE HOLES IN PAD C 1 2 3 1 2 3 1 2 3 2 4 4 2 4 4 2 4 4 1-1/4 3 1-3/4 1-1/4 3 3-3/4 1-3/4 3-1/2 4 DIMENSIONS D N 3 3 3-1/2 3 3 3-1/2 3-1/2 3-1/2 4 NOTE: The recommended connector and booster are ordered separately. Catalog number is for the POWERLUGTM only. MULTIPLE CONDUCTOR TAP APPLICATION CONNECTOR WCY 64 PB WCY 65 PB WCY 63 PB WCB 11 PB WCY 54 PB WCY 53 PB WCY 64 PB WCB 11 PB WCB 12 PB *RUN GROOVE Three - 1/0 ACSR (6/1) Diameter = 0.398 Three - 1/0 ACSR (6/1) Diameter = 0.398 Three - 2/0 ACSR (6/1) Diameter = 0.447 Three - #4 stranded Diameter = 0.232 Three - 1/0 stranded Diameter = 0.368 Three - 1/0 stranded Diameter = 0.368 Three - 2/0 stranded Diameter = 0.414 Three - #4 stranded Diameter = 0.232 Three - #4 stranded Diameter = 0.232 * Electrically, the three smaller conductors are the likely taps, however, during installation, they are located in the larger run groove due to their larger aggregate sum. *TAP GROOVE One - 4/0 ACSR (6/1) Diameter = 0.563 One - 3/0 ACSR (6/1) Diameter = 0.502 One - 4/0 ACSR (6/1) Diameter = 0.563 One - 1/0 ACSR (6/1) Diameter = 0.398 One - 4/0 stranded Diameter = 0.522 One - 3/0 stranded Diameter = 0.464 One - 4/0 stranded Diameter = 0.522 One - 1/0 stranded Diameter = 0.368 One - #4 solid copper hard drawn Diameter = 0.204 5/8 5/8 7/8 5/8 5/8 1 5/8 5/8 3/4 T 0.34 0.30 0.30 0.34 0.30 0.30 0.69 0.69 0.69 BURNDY Wedge The BURNDY(R) WEJTAPTM System has a wide variety of connectors available for many different conductor ranges. The following pages list some common conductors and the appropriate connector. ACSR to ACSR ACSR to AAC ACSR to Copper AAC to AAC AAC to Copper Stirrup Information page F10 page F11 page F12 page F13 page F14 pages F18 through F24 ORDERING INFORMATION Power boosters may be ordered separately in boxes of 25. Red boosters Blue boosters Yellow boosters Cat. #WPBRN Box 25 Cat. #WPBBN Box 25 Cat. #WPBYN Box 25 For information about conductors which F-8 are not listed, and for further ordering information, please contact BURNDY(R) at 1-800-346-4175.