BURNDY
Wedge
WEJTAP™
POWER LUG
WEJTAP™ POWERLUG™ terminals are
made of cast aluminum alloy for termination
of ACSR and Aluminum conductors.
F-7
Fig. 1 Fig. 2 Fig. 3
2 HOLE POWER LUG 4 HOLE POWER LUG 4 HOLE FLAG
MULTIPLE CONDUCTOR TAP APPLICATION
*Electrically, the three smaller conductors are the
likely taps, however, during installation, they are
located in the larger run groove due to their larger
aggregate sum.
NOTE: The recommended connector and booster are ordered
separately. Catalog number is for the POWERLUG™ only.
TAP GROOVE
FOR CONNECTOR CATALOG STANDARD CONDUCTOR HOLES DIMENSIONS
SELECTION NUMBER ACSR ASC/AAC FIGURE IN PAD C D N T
4/0 WCAB30R-2N 121-1/4 3 5/8 0.34
STANDARD WCAB30R-4N 6 Str. - 266.8 6 Str. - 300 2 4 3 3 5/8 0.30
ACSR WCBB30R-4N 341-3/4 3-1/2 7/8 0.30
336.4 WCAY39R-2N 121-1/4 3 5/8 0.34
STANDARD WCAY39R-4N 266.8 - 556.5 336.4 - 636 2 4 3 3 5/8 0.30
ACSR WCBY39R-4N 343-3/4 3-1/2 1 0.30
795 WCAY49R-2N 121-3/4 3-1/2 5/8 0.69
STANDARD WCAY49R-4N 605 - 1033.5 715.5 - 1113 2 4 3-1/2 3-1/2 5/8 0.69
ACSR WCBY49R-4N 34443/4 0.69
CONNECTOR *RUN GROOVE *TAP GROOVE
WCY 64 PB Three - 1/0 ACSR (6/1) Diameter = 0.398One - 4/0 ACSR (6/1) Diameter = 0.563
WCY 65 PB Three - 1/0 ACSR (6/1) Diameter = 0.398One - 3/0 ACSR (6/1) Diameter = 0.502
WCY 63 PB Three - 2/0 ACSR (6/1) Diameter = 0.447One - 4/0 ACSR (6/1) Diameter = 0.563
WCB 11 PB Three - #4 stranded Diameter = 0.232One - 1/0 ACSR (6/1) Diameter = 0.398
WCY 54 PB Three - 1/0 stranded Diameter = 0.368One - 4/0 stranded Diameter = 0.522
WCY 53 PB Three - 1/0 stranded Diameter = 0.368One - 3/0 stranded Diameter = 0.464
WCY 64 PB Three - 2/0 stranded Diameter = 0.414One - 4/0 stranded Diameter = 0.522
WCB 11 PB Three - #4 stranded Diameter = 0.232One - 1/0 stranded Diameter = 0.368
WCB 12 PB Three - #4 stranded Diameter = 0.232One - #4 solid copper hard drawn Diameter = 0.204
BURNDY
Wedge
The BURNDY®WEJTAP™ System has a
wide variety of connectors available for
many different conductor ranges.
The following pages list some common
conductors and the appropriate connector.
ACSR to ACSR page F10
ACSR to AAC page F11
ACSR to Copper page F12
AAC to AAC page F13
AAC to Copper page F14
Stirrup Information pages F18 through F24
ORDERING INFORMATION
■Power boosters may be ordered
separately in boxes of 25.
Red boosters Cat. #WPBRN Box 25
Blue boosters Cat. #WPBBN Box 25
Yellow boosters Cat. #WPBYN Box 25
For information about conductors which
are not listed, and for further ordering
information, please contact BURNDY®at
1-800-346-4175.
F-8
