PR533 Contactless Interface Controller Rev. 3.3 -- 20 October 2012 206433 Product short data sheet COMPANY PUBLIC 1. General description The PR5331C3HN is a highly integrated transceiver module for contactless reader/writer communication at 13.56 MHz. A dedicated ROM code is implemented to handle different RF protocols by an integrated microcontroller. The system host controller communicates with the PR5331C3HN by using the USB or the HSU link. The protocol between the host controller and the PR5331C3HN, on top of this physical link is the CCID protocol. 1.1 RF protocols PR5331C3HN supports the PCD mode for FeliCa (212 kbps and 424 kbps), ISO/IEC14443 Type A and B (from 106 kbps to 848 kbps), MIFARE (106 kbps), B' cards (106 kbps), picoPass tag (106 kbps) and Innovision Jewel cards (106 kbps) The Initiator passive mode (from 106 kbps to 424 kbps) can be supported through the PC/SC transparent mode. 1.2 Interfaces The PR5331C3HN supports a USB 2.0 full speed interface (bus powered or host powered mode). Alternatively to the USB interface, a High Speed UART (from 9600b up to 1.2 Mb) can be used to connect the PR533 to a host. The R5331C3HN has also a master I2C-bus interface that allows to connect one of the following peripherals: * An external EEPROM: in this case the PR5331C3HN is configured as master and is able to communicate with external EEPROM (address A0h) which can store configuration data like PID, UID and RF parameters * A TDA8029 contact smart card reader 1.3 Standards compliancy PR5331C3HN offers commands in order for applications to be compliant with "EMV Contactless Communication Protocol Specification V2.0.1". PR5331C3HN supports RF protocols ISO/IEC 14443A and B such as compliancy with Smart eID standard can be achieved at application level. PR533 NXP Semiconductors Contactless Interface Controller Support of USB 2.0 full speed, interoperable with USB 3.0 hubs The PR533C3HN in PCD mode is compliant with EMV contactless specification V2.0.1. 1.4 Supported operating systems * * * * * * Microsoft Windows 2000 Microsoft Windows XP (32 and 64 bits) Microsoft Windows 2003 Server (32 and 64 bits) Microsoft Windows 2008 Server (32 and 64 bits) Microsoft Windows Vista (32 and 64 bits) Microsoft Windows 7 (32 and 64 bits) The PR533 is supported by the following OS through the PCSC-Lite driver: * * * * * GNU/Linux using libusb 1.0.x and later Mac OS Leopard (1.5.6 and newer) Mac OS Snow Leopard (1.6.X) Solaris FreeBSD 2. Features and benefits USB 2.0 full speed host interface and CCID protocol support Integrated microcontroller implements high-level RF protocols Buffered output drivers to connect an antenna with minimum number of external components Integrated RF level detector Integrated data mode detector Supports ISO/IEC 14443A Reader/Writer mode up to 848 kbit/s Supports ISO/IEC 14443B Reader/Writer mode up to 848 kbit/s Supports contactless communication according to the FeliCa protocol at 212 kbit/s and 424 kbit/s Supports MIFARE encryption Typical operating distance in Read/Write mode for communication to ISO/IEC 14443A/MIFARE, ISO/IEC 14443B or FeliCa cards up to 50 mm depending on antenna size and tuning I2C-bus master interface allows to connect an external I2C EEPROM for configuration data storage or to control a TDA8029 contact smart card reader Low-power modes Hard power-down mode Soft power-down mode Only one external oscillator required (27.12 MHz Crystal oscillator) Power modes USB bus power mode 2.5 V to 3.6 V power supply operating range in non-USB bus power mode PR533_SDS Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.3. -- 20 October 2012 206433 (c) NXP B.V. 2012. All rights reserved. 2 of 35 PR533 NXP Semiconductors Contactless Interface Controller Dedicated I/O ports for external device control 3. Quick reference data Table 1. Quick reference data Symbol Parameter VBUS bus supply voltage Conditions Min Typ Max Unit 4.02 5 5.25 V 2.5 3.3 3.6 V [1] 2.5 3.3 3.6 V [1] 2.5 3.3 3.6 V (non-USB mode); VBUS = VDDD; VSSD = 0 V VDDA VDDD analog supply voltage digital supply voltage VDDA = VDDD = VDD(TVDD) = VDD(PVDD); VSSA = VSSD = VSS(PVSS) = VSS(TVSS) = 0 V VDD(TVDD) TVDD supply voltage VDD(PVDD) PVDD supply voltage VDD(SVDD) SVDD supply voltage VSSA = VSSD = VSS(PVSS) = VSS(TVSS) = 0 V; reserved for future use IBUS bus supply current Ipd power-down current [1] 2.5 3.3 3.6 V 1.6 - 3.6 V VDDD V maximum load current (USB mode); measured on VBUS 150 mA maximum inrush current limitation; at power-up (curlimoff = 0) 100 mA VDDD 0.1 - VDDA = VDDD = VDD(TVDD) = VDD(PVDD) = 3 V; not powered from USB hard power-down; RF level detector off 10 A soft power-down; RF level detector on 30 A - - 250 A - 15 - mA VDDS = 3 V - - 30 mA analog supply current RF level detector on - 6 - mA IDD(TVDD) TVDD supply current during RF transmission; VDD(TVDD) = 3 V - 60 100 mA Ptot total power dissipation Tamb = 30 to +85 C - - 0.55 W Tamb ambient temperature 30 - +85 C ICCSL suspended low-power device supply current RF level detector on, (without resistor on DP/DM) IDDD digital supply current RF level detector on, VDD(SVDD) switch off IDD(SVDD) SVDD supply current IDDA [1] [1] VDDD, VDDA and VDD(TVDD) must always be at the same supply voltage. PR533_SDS Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.3. -- 20 October 2012 206433 (c) NXP B.V. 2012. All rights reserved. 3 of 35 PR533 NXP Semiconductors Contactless Interface Controller 4. Ordering information Table 2. Ordering information Type number Package Name PR5331C3HN/C350[1][2][3] PR5331C3HN/C360[1][2][3] Description Version HVQFN40 plastic thermal enhanced very thin quad flat package; no leads; 40 terminals; body 6 6 0.85 mm SOT618-1 [1] 50 or 60 refers to the ROM code version described in the User Manual. For differences of romcode versions refer to the release note of the product. [2] Refer to Section 14.4 "Licenses". [3] MSL 2 (Moisture Sensitivity Level). 5. Block diagram The following block diagram describes hardware blocks controlled by PR5331C3HN firmware or which can be accessible for data transaction by a host baseband. RSTPD_N VBUS RSTOUT_N SUPPLY SUPERVISOR DVSS DVDD OSCOUT AVSS REGULATOR 3.3 V SVDD SVDD SWITCH 27 MHz OSC AND FRAC N PLL OSCIN P70_IRQ SIGIN SIGOUT P34 PCR 48 MHz DELATT USB DEVICE TVDD I0 MATX 80C51 CPU I1 44 k ROM 1.2 k BYTES RAM I2C MASTER P50_SCL PVDD Product short data sheet COMPANY PUBLIC RX VMID TX1 P30 P31 TX2 P32_INT0 GPIOs PR533_SDS AVDD TVSS SDA Fig 1. NFC ANALOG FRONT END AND CLUART P33_INT0 P35 aaa-000043 Block diagram All information provided in this document is subject to legal disclaimers. Rev. 3.3. -- 20 October 2012 206433 (c) NXP B.V. 2012. All rights reserved. 4 of 35 PR533 NXP Semiconductors Contactless Interface Controller 6. Pinning information 31 P33_INT1 32 P50_SCL 33 SDA 34 P34 35 SIGOUT 36 SIGIN 37 SVDD 38 RSTPD_N terminal 1 index area 39 DVDD 40 VBUS 6.1 Pinning DVSS 1 30 P32_INT0 LOADMOD 2 29 P31 TVSS1 3 28 P30 TX1 4 27 DELATT TVDD 5 TX2 6 TVSS2 7 24 DM AVDD 8 23 DVSS VMID 9 22 RSTOUT_N 26 PVDD PR533 25 DP P35 20 TESTEN 19 I1 18 I0 17 OSCOUT 16 OSCIN 15 DVSS 14 AUX2 13 AUX1 12 21 P70_IRQ AVSS 11 RX 10 aaa-000044 Transparent top view Fig 2. Pin configuration for HVQFN 40 (SOT618-1) 6.2 Pin description Table 3. PR533 pin description Symbol Pin Type Pad ref voltage Description DVSS 1 G digital ground LOADMOD 2 O TVSS1 3 G TX1 4 O TVDD 5 P TX2 6 O TVSS2 7 G transmitter ground: supplies the output stage of TX2 AVDD 8 P analog power supply VMID 9 P AVDD internal reference voltage: This pin delivers the internal reference voltage. RX 10 I AVDD receiver input: Input pin for the reception signal, which is the load modulated 13.56 MHz energy carrier from the antenna circuit AVSS 11 G AUX1 12 O DVDD auxiliary output 1: This pin delivers analog and digital test signals AUX2 13 O DVDD auxiliary output 2: This pin delivers analog and digital test signals DVSS 14 G PR533_SDS Product short data sheet COMPANY PUBLIC DVDD load modulation output provides digital signal for FeliCa and MIFARE card operating mode transmitter ground: supplies the output stage of TX1 TVDD transmitter 1: transmits modulated 13.56 MHz energy carrier transmitter power supply: supplies the output stage of TX1 and TX2 TVDD transmitter 2: delivers the modulated 13.56 MHz energy carrier analog ground digital ground All information provided in this document is subject to legal disclaimers. Rev. 3.3. -- 20 October 2012 206433 (c) NXP B.V. 2012. All rights reserved. 5 of 35 PR533 NXP Semiconductors Contactless Interface Controller Table 3. PR533 pin description ...continued Symbol Pin Type Pad ref voltage Description OSCIN 15 I AVDD crystal oscillator input: input to the inverting amplifier of the oscillator. This pin is also the input for an externally generated clock (fclk = 27.12 MHz). OSCOUT 16 O AVDD crystal oscillator output: output of the inverting amplifier of the oscillator. I0 17 I DVDD I1 18 I DVDD interface mode lines: selects the used host interface; in test mode I0 is used as test signals. TESTEN 19 I DVDD test enable pin: when set to 1 enable the test mode. when set to 0 reset the TCB and disable the access to the test mode. P35 20 I/O DVDD general purpose I/O signal P70_IRQ 21 I/O PVDD interrupt request: output to signal an interrupt event to the host (Port 7 bit 0) RSTOUT_N 22 O PVDD output reset signal; when LOW it indicates that the circuit is in reset state. DVSS 23 G DM 24 I/O PVDD USB D data line in USB mode or TX in HSU mode; in test mode this signal is used as input and output test signal DP 25 I/O PVDD USB D+ data line in USB mode or RX in HSU mode; in test mode this signal is used as input and output test signal. PVDD 26 P DELATT 27 O PVDD optional output for an external 1.5 k resistor connection on D+. P30 28 I/O PVDD general purpose I/O signal. Can be configured to act either as RX line of the second serial interface UART or general purpose I/O. digital ground I/O pad power supply In test mode this signal is used as input and output test signal. P31 29 I/O PVDD general purpose I/O signal. Can be configured to act either as TX line of the second serial interface UART or general purpose I/O. In test mode this signal is used as input and output test signal. P32_INT0 30 I/O PVDD general purpose I/O signal. Can also be used as an interrupt source In test mode this signal is used as input and output test signal. P33_INT1 31 I/O PVDD general purpose I/O signal. Can be used to generate an HZ state on the output of the selected interface for the Host communication and to enter into power-down mode without resetting the internal state of PR533. P50_SCL 32 I/O DVDD I2C-bus clock line - open-drain in output mode SDA 33 I/O DVDD I2C-bus data line - open-drain in output mode P34 34 I/O SVDD general purpose I/O signal or clock signal for the SAM SIGOUT 35 O SVDD contactless communication interface output: delivers a serial data stream according to NFCIP-1 and output signal for the SAM. In test mode this signal is used as input and output test signal. In test mode this signal is used as test signal output. SIGIN 36 I SVDD contactless communication interface input: accepts a digital, serial data stream according to NFCIP-1 and input signal from the SAM. In test mode this signal is used as test signal input. SVDD 37 PR533_SDS Product short data sheet COMPANY PUBLIC P output power for SAM power supply. Switched on by Firmware with an overload detection. Used as a reference voltage for SAM communication. All information provided in this document is subject to legal disclaimers. Rev. 3.3. -- 20 October 2012 206433 (c) NXP B.V. 2012. All rights reserved. 6 of 35 PR533 NXP Semiconductors Contactless Interface Controller Table 3. PR533 pin description ...continued Symbol Pin Type Pad ref voltage Description RSTPD_N 38 I reset and power-down: When LOW, internal current sources are switched off, the oscillator is inhibited, and the input pads are disconnected from the outside world. PVDD With a negative edge on this pin the internal reset phase starts. DVDD 39 P digital power supply VBUS 40 P USB power supply. [1] Pin types: I= Input, O = Output, I/O = Input/Output, P = Power and G = Ground. 7. Limiting values Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter VDDA Conditions Min Max Unit analog supply voltage 0.5 +4 V VDDD digital supply voltage 0.5 +4 V VDD(TVDD) TVDD supply voltage 0.5 +4 V VDD(PVDD) PVDD supply voltage 0.5 +4 V VDD(SVDD) SVDD supply voltage 0.5 +4 V VBUS bus supply voltage 0.5 +5.5 V - 500 mW - 30 mA 0.5 +4 V Ptot total power dissipation IDD(SVDD) SVDD supply current maximum current in VDDS switch Vi input voltage TX1, TX2, RX pins VESD electrostatic discharge voltage HBM [1] 2.0 kV MM [2] - 200 V CDM [3] - 1 kV 55 +150 C C Tstg storage temperature Tj junction temperature 40 +125 Vi(dyn)(RX) dynamic input voltage on pin RX input signal at 13.56 MHz 0.7 VDD(AVDD) + 1.0 V Vi(dyn)(TX1) dynamic input voltage on pin TX1 input signal at 13.56 MHz 1.2 VDD(TVDD) + 1.3 V Vi(dyn)(TX2) dynamic input voltage on pin TX2 input signal at 13.56 MHz 1.2 VDD(TVDD) + 1.3 V ITX1 current on pin TX1 output signal at 13.56 MHz 300 +300 mA ITX2 current on pin TX2 output signal at 13.56 MHz 300 +300 mA [1] 1500 , 100 pF; EIA/JESD22-A114-A [2] 0.75 mH, 200 pF; EIA/JESD22-A115-A [3] Field induced model; EIA/JESC22-C101-C PR533_SDS Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.3. -- 20 October 2012 206433 (c) NXP B.V. 2012. All rights reserved. 7 of 35 PR533 NXP Semiconductors Contactless Interface Controller 8. Recommended operating conditions Table 5. Operating conditions Symbol Parameter Conditions Min Typ Max Unit VBUS bus supply voltage VSSA = VSSD = VSS(PVSS) = VSS(TVSS) = 0 V 4.02 5 5.25 V supply voltage (non-USB mode); VBUS = VDDD; VSSA = VSSD = VSS(PVSS) = VSS(TVSS) = 0 V 2.5 3.3 3.6 V VDDA analog supply voltage VDDA = VDDD = VDD(TVDD) = VDD(PVDD); VSSA = VSSD = VSS(PVSS) = VSS(TVSS) = 0 V [1][2] 2.5 3.3 3.6 V VDDD digital supply voltage VDDA = VDDD = VDD(TVDD) = VDD(PVDD); VSSA = VSSD = VSS(PVSS) = VSS(TVSS) = 0 V [1][2] 2.5 3.3 3.6 V VDD(TVDD) TVDD supply voltage VDDA = VDDD = VDD(TVDD) = VDD(PVDD); VSSA = VSSD = VSS(PVSS) = VSS(TVSS) = 0 V [1][2] 2.5 3.3 3.6 V VDD(PVDD) PVDD supply voltage supply pad for host interface; VDDA = VDDD = VDD(TVDD) = VDD(PVDD); VSSA = VSSD = VSS(PVSS) = VSS(TVSS) = 0 V [2] 1.6 1.8 to 3.3 3.6 V 30 +25 C Tamb ambient temperature [1] VSSA, VDDD and VDD(TVDD) shall always be on the same voltage level. [2] Supply voltages below 3 V reduces the performance (e.g. the achievable operating distance). +85 9. Thermal characteristics Table 6. Thermal characteristics Symbol Parameter Rth(j-a) thermal resistance from junction to ambient Conditions Min Typ Max Unit in free air with exposed pad soldered on a 4 layer Jedec PCB-0.5 - 37 41.1 K/W 10. Characteristics Unless otherwise specified, the limits are given for the full operating conditions. The typical value is given for 25 C, VDDD = 3.4 V and VDD(PVDD) = 3 V in non-USB bus power mode, VBUS = 5 V in USB power mode. Timings are only given from characterization results. 10.1 Power management characteristics 10.1.1 Current consumption characteristics Typical value using a complementary driver configuration and an antenna matched to 40 between TX1 and TX2 at 13.56 MHz. PR533_SDS Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.3. -- 20 October 2012 206433 (c) NXP B.V. 2012. All rights reserved. 8 of 35 PR533 NXP Semiconductors Contactless Interface Controller Table 7. Current consumption characteristics Symbol Parameter Conditions Min Ipd power-down current VDDA = VDDD = VDD(TVDD) = VDD(PVDD) = 3 V; not powered from USB - 1.3 10 A soft power-down current; not powered from USB; RF level detector on [1] - 9 30 A [1] - 120 250 A - 12 - mA - 3 6 mA VBUS = 5 V; VDDA = VDDD = VDD(TVDD) = VDD(PVDD) = 3 V; VDDS = 0 V; RF level detector on (without resistor on pin DP (D+)) IDDD digital supply current VDDA = VDDD = VDD(TVDD) = VDD(PVDD) = 3 V; RF level detector on IDDA analog supply current VDDA = VDDD = VDD(TVDD) = VDD(PVDD) = 3 V; RF level detector on RF level detector off IDD(SVDD) SVDD supply current sam_switch_en set to 1 TVDD supply current IDD(TVDD) Unit [1] suspended low-power device supply current PVDD supply current Max hard power-down current; not powered from USB; RF level detector off ICCSL IDD(PVDD) Typ continuous wave; VDD(TVDD) = 3 V [1] Ipd is the total currents over all supplies. [2] IDD(PVDD) depends on the overall load at the digital pins. [3] IDD(SVDD) depends on the overall load on VDD(SVDD) pad. [4] IDD(TVDD) depends on VDD(TVDD) and the external circuitry connected to TX1 and TX2. [5] During operation with a typical circuitry the overall current is below 100 mA. - 1.5 5 mA [2] - - 30 mA [3] - - 30 mA [4][5] - 60 100 mA 10.1.2 Voltage regulator characteristics Table 8. Voltage regulator characteristics[1] Symbol Parameter Conditions Min VBUS bus supply voltage USB mode; VSS = 0 V 4.02 5 5.25 V VDDD digital supply voltage after inrush current limitation (USB mode); from IVDDD = 0 mA to IVDDD = 150 mA 2.95 3.3 3.6 V IBUS bus supply current USB mode; measure on VBUS - - 150 mA Iinrush(lim) inrush current limit at power-up (curlimofff = 0) - - 100 mA Vth(rst)reg regulator reset threshold voltage regulator reset 1.90 2.15 2.40 V Vth(rst)reg(hys) regulator reset threshold voltage hysteresis 35 60 85 mV VDDD decoupling capacitor 8 10 - F [1] Typ Max Unit The internal regulator is only enabled when the USB interface is selected by I0 and I1. 10.2 Antenna presence self test thresholds The values in Table 9 are guaranteed by design. Only functional is done in production for cases andet_ithl[1:0]=10b and for andet_ithh[2:0]=011b. PR533_SDS Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.3. -- 20 October 2012 206433 (c) NXP B.V. 2012. All rights reserved. 9 of 35 PR533 NXP Semiconductors Contactless Interface Controller Table 9. Antenna presence detection Parameter Conditions Min Typ Max Unit IVDDD lower current threshold for antenna presence detection andet_ithl[1:0] 00b - 5 - mA 01b - 15 - mA 10b - 25 - mA 11b - 35 - mA IVDDD upper current threshold for antenna presence detection andet_ithh[2:0] PR533_SDS Product short data sheet COMPANY PUBLIC 000b - 45 - mA 001b - 60 - mA 010b - 75 - mA 011b - 90 - mA 100b - 105 - mA 101b - 120 - mA 110b - 135 - mA 111b - 150 - mA All information provided in this document is subject to legal disclaimers. Rev. 3.3. -- 20 October 2012 206433 (c) NXP B.V. 2012. All rights reserved. 10 of 35 PR533 NXP Semiconductors Contactless Interface Controller 10.3 Typical 27.12 MHz Crystal requirements Table 10. Crystal requirements Symbol Parameter Conditions Min Typ Max Unit fxtal crystal frequency 27.107 27.12 27.133 MHz ESR equivalent series resistance - - 100 CL load capacitance - 10 - pF Pxtal crystal power dissipation 100 - - W 10.4 Pin characteristics for 27.12 MHz XTAL Oscillator (OSCIN, OSCOUT) Table 11. Pin characteristics for 27.12 MHz XTAL Oscillator (OSCIN, OSCOUT) Symbol Parameter Conditions RSTPD_N = 0 V Min Typ Max Unit ILI input leakage current 1 - +1 mA VIH HIGH-level input voltage 0.7 VDDA - VDDA V VIL LOW-level input voltage 0 - 0.3 VDDA V VOH HIGH-level output voltage - 1.1 - V VOL LOW-level output voltage - 0.2 - V fclk clock frequency 0.05 % 27.12 +0.05 % MHz duty cycle n(th) phase noise threshold [1] fn(th) phase noise threshold fre- n(th) = 140dBc/Hz; quency 20dB/decade slope [1] 40 50 60 % - - 140 dBc/Hz - - 50 kHz OSCIN Vi input voltage DC - 0.65 - V Ci input capacitance VDDA = 2.8 V; Vi (DC) = 0.65 V; Vi (AC) = 1 V p-p - 2 - pF - 2 - pF OSCOUT Ci [1] input capacitance n(th) and fn(th) define the mask for maximum acceptable phase noise of the clock signal at the OSCIN, OSCOUT inputs. See Figure 3 "27.12 MHz input clock phase noise spectrum mask". phase noise (dBc/Hz) -20 dB/decade acceptable phase noise area n(th) fn(th) frequency (Hz) 001aao393 Fig 3. PR533_SDS Product short data sheet COMPANY PUBLIC 27.12 MHz input clock phase noise spectrum mask All information provided in this document is subject to legal disclaimers. Rev. 3.3. -- 20 October 2012 206433 (c) NXP B.V. 2012. All rights reserved. 11 of 35 PR533 NXP Semiconductors Contactless Interface Controller 10.5 RSTPD_N input pin characteristics Table 12. RSTPD_N input pin characteristics Symbol Parameter Conditions Min Typ Max Unit VIH HIGH-level input voltage VDD(PVDD) 0.4 - VDD(PVDD) V VIL LOW-level input voltage 0 - 0.4 V IIH HIGH-level input current 1 - 1 A IIL LOW-level input current VI = 0 V 1 - 1 A Ci input capacitance - 2.5 - pF VI = VDD(PVDD) 10.6 Input pin characteristics for I0, I1 and TESTEN PR533_SDS Product short data sheet COMPANY PUBLIC Table 13. Input pin characteristics for I0, I1 and TESTEN Symbol Parameter Conditions Min Typ Max Unit 0.7 VDDD - VIH HIGH-level input voltage [1] VIL LOW-level input voltage [2] 0 IIH HIGH-level input current I0 and I1; VI = VDDD [3] 1 IIL LOW-level input current VI = 0 V Ci input capacitance VDDD V 0.3 VDDD V - 1 A 1 - 1 A - 2.5 - pF [1] To minimize power consumption when in soft power-down mode, the limit is VDDD 0.4 V. [2] To minimize power consumption when in soft power-down mode, the limit is 0.4 V. [3] TESTEN should never be set to high level in the application. It is used for production test purpose only. It is recommended to connect TESTEN to ground although there is a pull-down included. All information provided in this document is subject to legal disclaimers. Rev. 3.3. -- 20 October 2012 206433 (c) NXP B.V. 2012. All rights reserved. 12 of 35 PR533 NXP Semiconductors Contactless Interface Controller 10.7 RSTOUT_N output pin characteristics Table 14. RSTOUT_N output pin characteristics Symbol Parameter VOH VOL IOH Conditions Max Unit 0.7 VDD(PVDD) - VDD(PVDD) V 0.7 VDD(PVDD) - VDD(PVDD) V VDD(PVDD) = 3 V; IOH = 4 mA LOW-level output voltage VDD(PVDD) = 3 V; IOL = 4 mA 0 - 0.3 VDD(PVDD) V VDD(PVDD) = 1.8 V; IOL = 2 mA [1] 0 - 0.3 VDD(PVDD) V HIGH-level output current VDD(PVDD) = 3 V; VOH = 0.8 VDD(PVDD) [2] 4 - - mA 2 - - mA 4 - - mA 2 - - mA - 30 pF LOW-level output current VDD(PVDD) = 1.8 V; IOH = 2 mA VDD(PVDD) = 3 V; VOL = 0.2 VDD(PVDD) VDD(PVDD) = 1.8 V; VOL = 0.3 VDD(PVDD) CL load capacitance tr rise time tf Typ HIGH-level output voltage [1] VDD(PVDD) = 1.8 V; VOH = 0.7 VDD(PVDD) IOL Min fall time [2] VDD(PVDD) = 3 V; VOH = 0.8 VDD(PVDD); CL = 30 pF - - 13.5 ns VDDP = 1.8 V; VOH = 0.7 VDD(PVDD); CL = 30 pF - - 10.8 ns VDD(PVDD) = 3 V; VOL = 0.2 VDD(PVDD); CL = 30 pF - - 13.5 ns VDD(PVDD) = 1.8 V; VOL = 0.3 VDD(PVDD); CL = 30 pF - - 10.8 ns [1] Data at VDD(PVDD) = 1.8V are only given from characterization results. [2] IOH and IOL give the output drive capability from which the rise and fall times may be calculated as a function of the load capacitance. PR533_SDS Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.3. -- 20 October 2012 206433 (c) NXP B.V. 2012. All rights reserved. 13 of 35 PR533 NXP Semiconductors Contactless Interface Controller 10.8 Input/output characteristics for pin P70_IRQ Table 15. Input/output pin characteristics for pin P70_IRQ Symbol Parameter Conditions VIH HIGH-level input voltage [1] VIL LOW-level input voltage [2] VOH HIGH-level output voltage push-pull mode; VDD(PVDD) = 3 V; IOH = 4 mA push-pull mode; VDD(PVDD) = 1.8 V; IOH = -2 mA VOL LOW-level output voltage [3] push-pull mode; VDD(PVDD) = 3 V; IOL = 4 mA push-pull mode; VDD(PVDD) = 1.8 V; IOL = 2 mA IIH HIGH-level input current input mode; VI = VDDD IIL LOW-level input current input mode; VI = 0 V [3] Min Typ Max Unit 0.7 VDD(PVDD) - VDD(PVDD) V 0 - 0.3 VDD(PVDD) V 0.7 VDD(PVDD) - VDD(PVDD) V 0.7 VDD(PVDD) - VDD(PVDD) V 0 - 0.3 VDD(PVDD) V 0 - 0.3 VDD(PVDD) V 1 - 1 A 1 - 1 A 4 - - mA 4 - - mA 1 - 1 A IOH HIGH-level output current VDD(PVDD) = 3 V; VOH = 0.8 VDD(PVDD) [5] IOL LOW-level output current VDD(PVDD) = 3 V; VOL = 0.2 VDD(PVDD) [5] ILI input leakage current RSTPD_N = 0.4 V Ci input capacitance - 2.5 CL load capacitance - - 30 pF tr rise time VDD(PVDD) = 3 V; VOH = 0.8 VDD(PVDD); CL = 30 pF - - 13.5 ns VDD(PVDD) = 1.8 V; VOH = 0.7 VDD(PVDD); CL = 30 pF - - 10.8 ns VDD(PVDD) = 3 V; VOL = 0.2 VDD(PVDD); CL= 30 pF - - 13.5 ns VDD(PVDD) = 1.8 V; VOL = 0.3 VDD(PVDD); CL = 30 pF - - 10.8 ns tf fall time pF [1] To minimize power consumption when in soft power-down mode, the limit is VDD(PVDD) 0.4 V. [2] To minimize power consumption when in soft power-down mode, the limit is 0.4 V. [3] Data at VDD(PVDD) = 1.8 V are only given from characterization results. [4] The IOH and IOL give the output driving capability and allow to calculate directly the rise and fall time as function of the load capacitance. PR533_SDS Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.3. -- 20 October 2012 206433 (c) NXP B.V. 2012. All rights reserved. 14 of 35 PR533 NXP Semiconductors Contactless Interface Controller 10.9 Input/output pin characteristics for P30 / UART_RX, P31 / UART_TX, P32_INT0, P33_INT1 Table 16. Input/output pin characteristics for P30 / UART_RX, P31 / UART_TX, P32_INT0, P33_INT1 Symbol Parameter Conditions Min VIH HIGH-level input voltage [1] VIL LOW-level input voltage [2] VOH HIGH-level output voltage push-pull mode; VDD(PVDD) = 3 V; IOH = 4 mA VDD(PVDD) = 1.8 V; IOH = 2 mA LOW-level output voltage VOL [3] push-pull mode; VDD(PVDD) = 3 V; IOL = 4 mA VDD(PVDD) = 1.8 V; IOL = 2 mA IIH HIGH-level input current input mode; VI = VDD(PVDD) IIL LOW-level input current input mode; VI = 0 V [3] Max Unit - VDD(PVDD) V - 0.3 VDD(PVDD) V - VDD(PVDD) V VDD(PVDD) 0.4 - VDD(PVDD) V 0 - 0.4 V 0 - 0.4 V 1 - 1 A 0.7 VDD(PVDD) 0 VDD(PVDD) 0.4 Typ 1 - 1 A 4 - - mA 4 - - mA 1 - 1 A IOH HIGH-level output current VDD(PVDD) = 3 V; VOH = 0.8 VDD(PVDD) [4] IOL LOW-level output current VDD(PVDD) = 3 V; VOL = 0.2 VDD(PVDD) [4] ILI input leakage current Ci input capacitance - 2.5 - pF CL load capacitance - - 30 pF tr rise time VDD(PVDD) = 3 V; VOH = 0.8 VDD(PVDD); CL = 30 pF - - 13.5 ns VDD(PVDD) = 1.8 V; VOH = 0.7 VDD(PVDD); CL = 30 pF - - 10.8 ns VDD(PVDD) = 3 V; VOL = 0.2 VDD(PVDD); CL= 30 pF - - 13.5 ns VDD(PVDD) = 1.8 V; VOL = 0.3 VDD(PVDD); CL = 30 pF - - 10.8 ns tf fall time RSTPD_N = 0.4 V [1] To minimize power consumption when in soft power-down mode, the limit is VDD(PVDD) 0.4 V. [2] To minimize power consumption when in soft power-down mode, the limit is 0.4 V [3] Data at VDD(PVDD) = 1.8 V are only given from characterization results. [4] The IOH and IOL give the output driving capability and allow to calculate directly the rise and fall time as function of the load capacitance. PR533_SDS Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.3. -- 20 October 2012 206433 (c) NXP B.V. 2012. All rights reserved. 15 of 35 PR533 NXP Semiconductors Contactless Interface Controller 10.10 Input/output pin characteristics for P35 Table 17. Input/output pin characteristics for P35 Symbol Parameter Min Typ Max Unit HIGH-level input voltage [1] 0.7 VDDD - VDDD V VIL LOW-level input voltage [2] 0 - 0.3 VDDD V VOH HIGH-level output voltage VDDD 0.4 - VDDD V VOL LOW-level output voltage VDDD = 3 V; IOL = 4 mA 0 - 0.4 V IIH HIGH-level input current VI = VDDD 1 - 1 A IIL LOW-level input current VI = 0 V 1 - 1 A IOH HIGH-level output current VDDD = 3 V; VOH = 0.8 VDD(PVDD) [3] 4 - - mA IOL LOW-level output current VDDD = 3 V; VOL = 0.2 VDD(PVDD) [3] 4 - - mA ILI input leakage current 1 - 1 A Ci input capacitance - 2.5 - pF CL load capacitance - - 30 pF tr rise time VDDD = 3 V; VOH = 0.8 VDDD; CL = 30 pF - - 13.5 ns VDDD = 1.8 V; VOH = 0.7 VDDD; CL = 30 pF - - 10.8 ns VDDD = 3 V; VOL = 0.2 VDDD; CL= 30 pF - - 13.5 ns VDDD = 1.8 V; VOL = 0.3 VDDD; CL = 30 pF - - 10.8 ns VIH tf fall time Conditions VDDD = 3 V; IOH = 4 mA RSTPD_N = 0.4 V [1] To minimize power consumption when in soft power-down mode, the limit is VDDD 0.4 V. [2] To minimize power consumption when in soft power-down mode, the limit is 0.4 V. [3] The IOH and IOL give the output driving capability and allow to calculate directly the rise and fall time as function of the load capacitance. PR533_SDS Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.3. -- 20 October 2012 206433 (c) NXP B.V. 2012. All rights reserved. 16 of 35 PR533 NXP Semiconductors Contactless Interface Controller 10.11 Input/output pin characteristics for DP and DM Table 18. Input/output pin characteristics for DP and DM for USB interface Symbol Parameter Conditions HIGH-level input voltage VIH VDD(PVDD) = 3.3 V [1] Min Typ Max Unit 2 - 3.6 V 0 - 0.8 V VIL LOW-level input voltage VOH HIGH-level output voltage VDD(PVDD) = 3.3 V; RPD = 1.5 to VSS 2.8 - VDD(PVDD) V VOL LOW-level output voltage VDD(PVDD) = 3.3 V; RPD = 1.5 to VDD(PVDD) 0 - 0.3 V IOH HIGH-level output current VDD(PVDD) = 3.3 V; VOH = 0.8 VDD(PVDD) 4 - - mA 2 - - mA 4 - - mA 2 - - mA [2] VDD(PVDD) = 1.8 V; VOH = 0.7 VDD(PVDD) LOW-level output current IOL VDD(PVDD) = 3.3 V; VOL = 0.2 VDD(PVDD) [2] VDD(PVDD) = 1.8 V; VOL = 0.3 VDD(PVDD) IIH HIGH-level input current VI = VDD(PVDD) - - 1 A IIL LOW-level input current VI = 0 V - - 1 A ILI input leakage current RSTPD_N = 0 V 1 - +1 A Ci input capacitance - 2.5 3.5 pF ZINP input impedance exclusive of pull-up/pull-down (for low-/full speed) 300 - - k ZDRV driver output impedance for driver which is not high-speed capable 28 - 44 tFDRATE full-speed data rate for devices which are not high-speed capable 11.97 - 12.03 Mb/s tDJ1 source jitter total (including frequency tolerance) to next transition 3.5 - +3.5 ns tDJ2 source jitter total (including frequency tolerance) for paired transitions 4 - +4 ns tFDEOP source jitter for differential transition to SE0 transition 2 - +5 ns tJR1 receiver jitter to next transition 18.5 - +18.5 ns tJR2 receiver jitter for paired transitions 9 - +9 ns tFEOPT source SE0 interval of EOP 160 - 175 ns tFEOPR receiver SE0 interval of EOP 82 - - ns tFST width of SE0 interval during differential transition - - 14 ns [1] The value does not guarantee the power-down consumptions. To reach the specified power-down consumptions, the limit is 0.4 V. [2] The IOH and IOL give the output driving capability and allow to calculate directly the rise and fall time as function of the load capacitance. PR533_SDS Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.3. -- 20 October 2012 206433 (c) NXP B.V. 2012. All rights reserved. 17 of 35 PR533 NXP Semiconductors Contactless Interface Controller Table 19. USB DP/DM differential receiver input levels Symbol Parameter Conditions Min Typ Max Unit VDI differential input sensitivity voltage - 0.2 - - V VCM differential common mode voltage range - 0.8 - 2.5 V Table 20. USB DP/DM driver characteristics Symbol Parameter Conditions Min Typ Max Unit tr rise time CL = 50 pF; 10 % to 90 % of (VOH - VOL) 4 - 20 ns tf fall time CL = 50 pF; 10 % to 90 % of (VOH - VOL) 4 - 20 ns tFRFM differential rise and fall time matching (tFR/tFF); excluding the first transition from Idle state 90 - 111.1 % VCRS output signal crossover voltage excluding the first transition from Idle state 1.3 - 2.0 V level 1 +400 mV differential point 3 point 4 point 1 point 2 point 5 0 V differential point 6 -400 mV differential level 2 0% unit interval 100 % 001aan914 Fig 4. Transmit waveform at DP/DM PR533_SDS Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.3. -- 20 October 2012 206433 (c) NXP B.V. 2012. All rights reserved. 18 of 35 PR533 NXP Semiconductors Contactless Interface Controller Table 21. Input Pin characteristics for DP for HSU interface Symbol Parameter Min Typ Max Unit HIGH-level input voltage [1] 0.7 VDD(PVDD) - VDD(PVDD) V VIL LOW-level input voltage [2] 0 - 0.3 VDD(PVDD) V IIH HIGH-level input current Vi = VDD(PVDD) - - 1 mA IIL LOW-level input current Vi = 0 V - - 1 mA ILI input leakage current RSTPD_N = 0 V 1 1 mA Ci input capacitance 3.5 pF VIH Conditions - 2.5 [1] The value does not guarantee the power-down consumptions. To reach the specified power-down consumptions, the limit is VDD(PVDD) 0.4 V. [2] The value does not guarantee the power-down consumptions. To reach the specified power-down consumptions, the limit is 0.4 V. Table 22. Output Pin characteristics for DM for HSU interface Symbol Parameter Conditions Min Max Unit VOH HIGH-level output voltage VDD(PVDD) = 3 V; IOH = 4 mA VDD(PVDD) 0.4 - VDD(PVDD) V VDD(PVDD) = 1.8 V; IOH = 2 mA VDD(PVDD) 0.4 - VDD(PVDD) V 0 0.4 V VOL LOW-level output volt- VDD(PVDD) = 3 V; IOL = 4 mA age VDD(PVDD) = 1.8 V; IOL = 2 mA IOH HIGH-level output current 0 - 0.4 V - - mA 2 - - mA 4 - - mA VDD(PVDD) = 1.8 V; VOL = 0.3 VDD(PVDD) 2 - - mA RSTPD_N = 0 V 1 - 1 mA - - 30 pF VDDP = 3 V; VOH = 0.8 VDD(PVDD); CL = 30 pF - - 13.5 ns VDD(PVDD) = 1.8 V; VOH = 0.7 VDD(PVDD); CL = 30 pF - - 10.8 ns VDD(PVDD) = 3 V; VOL = 0.2 VDD(PVDD); CL= 30 pF - - 13.5 ns VDDP = 1.8 V; VOL = 0.3 VDD(PVDD); CL = 30 pF - - 10.8 ns LOW-level output cur- VDD(PVDD) = 3.3 V; rent VOL = 0.2 VDD(PVDD) ILI input leakage current CL load capacitance tr rise time fall time tf [1] - 4 VDD(PVDD) = 3 V; VOH = 0.8 VDD(PVDD) [1] VDD(PVDD) = 1.8 V; VOH = 0.7 VDD(PVDD) IOL Typ [1] The IOH and IOL give the output driving capability and allow to calculate directly the rise and fall time as function of the load capacitance PR533_SDS Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.3. -- 20 October 2012 206433 (c) NXP B.V. 2012. All rights reserved. 19 of 35 PR533 NXP Semiconductors Contactless Interface Controller 10.12 Input pin characteristics for SCL Table 23. Input/output drain output pin characteristics for SCL I2C interface Symbol Parameter Conditions Min Max Unit 0.7 VDD(PVDD) - VDDD V 0 - 0.3 VDDD V VDDD = 3 V; IOL = 4 mA 0 - 0.3 V HIGH-level input current VI = VDDD 1 - 1 A IIL LOW-level input current VI = 0 V 1 - 1 A RSTPD_N = 0.4 V 1 - 1 A - 2.5 HIGH-level input voltage [1] VIL LOW-level input voltage [2] VOL LOW-level output voltage IIH VIH ILI input leakage current Ci input capacitance CL load capacitance tr tf Typ pF - - 30 pF rise time of both SDA and SCL signals [3] 20 - 300 ns fall time of both SDA and SCL signals [3] 20 - 300 ns [1] To minimize power consumption when in soft power-down mode, the limit is VDDD 0.4 V. [2] To minimize power consumption when in soft power-down mode, the limit is 0.4 V. [3] The PR533 has a slope control according to the I2C-bus specification for the Fast mode. The slope control is always present and not dependent of the I2C-bus speed. 10.13 Input/output pin characteristics for SDA Table 24. Input/output drain output pin characteristics for SDA I2C interface Symbol Parameter Conditions Min Max Unit 0.7 VDD(PVDD) - VDDD V 0 - 0.3 VDDD V 0 - 0.3 V VI = VDDD 1 - 1 A HIGH-level input voltage [1] VIL LOW-level input voltage [2] VOL LOW-level output voltage VDDD = 3 V; IOL = 4 mA IIH HIGH-level input current VIH Typ IIL LOW-level input current VI = 0 V 1 - 1 A ILI input leakage current RSTPD_N = 0.4 V 1 - 1 A Ci input capacitance - 2.5 CL load capacitance tr rise time of both SDA and SCL signals [3] tf fall time of both SDA and SCL signals [3] [1] pF - - 30 pF 20 - 300 ns 20 - 300 ns To minimize power consumption when in soft power-down mode, the limit is VDDD 0.4 V. [2] To minimize power consumption when in soft power-down mode, the limit is 0.4 V. [3] The PR533 has a slope control according to the I2C-bus specification for the Fast mode. The slope control is always present and not dependent of the I2C-bus speed. PR533_SDS Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.3. -- 20 October 2012 206433 (c) NXP B.V. 2012. All rights reserved. 20 of 35 PR533 NXP Semiconductors Contactless Interface Controller 10.14 Output pin characteristics for DELATT Table 25. Output pin characteristics for DELATT Symbol Parameter VOH HIGH-level output voltage VIL LOW-level input voltage Conditions [1] Min Typ Max Unit 0.7 VDD(SVDD) - VDD(SVDD) V 0 - 0.3 VDD(PVDD) V IIH HIGH-level input current input mode; VI = VDD(SVDD) 1 - 1 A IIL LOW-level input current input mode; VI = 0 V 1 - 1 A ILI input leakage current RSTPD_N = 0.4 V 1 - 1 A Ci input capacitance - 2.5 - pF Typ Max Unit [1] To minimize power consumption when in soft power-down mode, the limit is VDD(PVDD) 0.4 V. 10.15 Input pin characteristics for SIGIN Table 26. Input/output pin characteristics for SIGIN Symbol Parameter Conditions Min 0.7 VDD(SVDD) - VDD(SVDD) V 0 - 0.3 VDD(SVDD) V VIH HIGH-level input voltage [1] VIL LOW-level input voltage [2] IIH HIGH-level input current VI = VDD(SVDD) 1 - +1 A IIL LOW-level input current VI = 0 V 1 - +1 A ILI input leakage current RSTPD_N = 0.4 V 1 - +1 A Ci input capacitance - 2.5 - pF [1] To minimize power consumption when in soft power-down mode, the limit is VDD(SVDD) 0.4 V. [2] To minimize power consumption when in soft power-down mode, the limit is 0.4 V. 10.16 Output pin characteristics for SIGOUT Table 27. Output pin characteristics for SIGOUT Symbol Parameter Conditions Min Typ Max Unit VOH HIGH-level output voltage VDDD 0.1 < VDD(SVDD) < VDDD IOH = 4 mA VDD(SVDD) 0.4 - VDD(SVDD) V VOL LOW-level output voltage VDDD 0.1 < VDD(SVDD) < VDDD IOL = +4 mA 0 - 0.4 V IOH HIGH-level output current VDDD 0.1 < VDD(SVDD) < VDDD IOH = 4 mA 0.4 - - mA IOL LOW-level output current VDDD 0.1 < VDD(SVDD) < VDDD IOL = +4 mA 4 - - mA RSTPD_N = 0.4 V +1 ILI input leakage current 1 - Ci input capacitance - 2.5 CL load capacitance - - 30 pF tr rise time VDD(SVDD) = 3 V; VOH = 0.8 VDD(SVDD); Cout = 30 pF - - 9 ns tf fall time VDD(SVDD) = 3 V; VOL = 0.2 VDD(SVDD); Cout = 30 pF - - 9 ns PR533_SDS Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.3. -- 20 October 2012 206433 A pF (c) NXP B.V. 2012. All rights reserved. 21 of 35 PR533 NXP Semiconductors Contactless Interface Controller 10.17 Input/output pin characteristics for P34 Table 28. Input/output pin characteristics for P34 Symbol Parameter Conditions Min Typ Max Unit 0.7 VDD(SVDD) - VDD(SVDD) V 0 0.3 VDD(SVDD) V HIGH-level input voltage [1] VIL LOW-level input voltage [2] VOH HIGH-level output voltage push-pull; VDDD 0.1 < VDD(SVDD) < VDDD IOH = 4 mA VDD(SVDD) 0.4 - VDD(SVDD) V VOL LOW-level output voltage push-pull; VDDD 0.1 < VDD(SVDD) < VDDD IOH = +4 mA 0 - 0.4 V IIH HIGH-level input current input mode; VI = VDD(SVDD) 1 - +1 A IIL LOW-level input current input mode; VI = 0 V 1 - +1 A VOH HIGH-level output voltage VDDD 0.1 < VDD(SVDD) < VDDD IOH = 4 mA 0.4 - - V VOL LOW-level output voltage VDDD 0.1 < VDD(SVDD) < VDDD IOL = +4 mA 4 - - V RSTPD_N = 0.4 V 1 - +1 A - 2.5 VIH ILI input leakage current Ci input capacitance CL load capacitance - - tr rise time VDDD = 0.1 < VDDD VOH = 0.8 VDD(SVDD); Cout = 30 pF [3] tf fall time VDDD = 0.1 < VDDD VOL = 0.2 VDD(SVDD); Cout = 30 pF [3] - - pF 30 pF 13.5 - ns 13.5 - ns [1] To minimize power consumption when in soft power-down mode, the limit is VDD(SVDD) 0.4 V. [2] To minimize power consumption when in soft power-down mode, the limit is 0.4 V. [3] IOH and IOL specify the output drive capability from which the rise and fall times may be calculated as a function of the load capacitance. 10.18 Output pin characteristics for LOADMOD Table 29. PR533_SDS Product short data sheet COMPANY PUBLIC Output pin characteristics for LOADMOD Symbol Parameter Conditions Min VOH HIGH-level output voltage VDDD = 3 V; IOH = 4 mA VDDD 0.4 - VDDD V VOL LOW-level output voltage VDDD = 3 V; IOL = 4 mA 0 - 0.4 V CL load capacitance - - 10 pF tr rise time VDDD = 3 V; VOH = 0.8 VDDD; Cout = 10 pF - - 4.5 ns tf fall time VDDD = 3 V; VOL = 0.2 VDDD; Cout = 10 pF - - 4.5 ns All information provided in this document is subject to legal disclaimers. Rev. 3.3. -- 20 October 2012 206433 Typ Max Unit (c) NXP B.V. 2012. All rights reserved. 22 of 35 PR533 NXP Semiconductors Contactless Interface Controller 10.19 Input pin characteristics for RX Miller coded signals Vin, RX AVDD +1 V mRXmil = VRX, IV, mil - Vmod VRX, IV, mil + Vmod VRX, IV, mil Vmod VMID 13.56 MHz carrier 0V Manchester coded signals Vin, RX AVDD +1 V VRXMod, Man VRX, IV, Man Vmod VMID 13.56 MHz carrier 0V aaa-002342 Fig 5. Table 30. RX input parameters Input pin characteristics for RX Symbol Parameter Conditions Min Vi input voltage dynamic; signal frequency at 13.56 MHz 0.7 Typ Max Ci input capacitance 6 10 Rs series resistance RX input; VDDA = 3 V; receiver active; VRX(p-p) = 1 V; 1.5 V DC offset 315 350 385 Unit VDDA +1 V 14 pF Minimum dynamic input voltage PR533_SDS Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.3. -- 20 October 2012 206433 (c) NXP B.V. 2012. All rights reserved. 23 of 35 PR533 NXP Semiconductors Contactless Interface Controller Table 30. Input pin characteristics for RX ...continued Symbol Parameter Conditions Min Typ Max Unit VRX(p-p) peak-to-peak receiver voltage Miller coded; 106 kbit/s - 150 500 mV Manchester coded; 212 kbit/s and 424 kbit/s - 100 200 mV Miller coded; 106 kbit/s VDDA - - V Manchester coded; 212 and 424 kbit/s VDDA - - V Maximum dynamic input voltage VRX(p-p) peak-to-peak receiver voltage Minimum modulation voltage Vmod modulation voltage RxGain = 6 and 7 [1] - - 6 mV RxGain = 4 and 5 [1] - - 18 mV RxGain = 0 to 3 [1] - - 120 mV - 33 - % Minimum modulation index m [1] modulation index Miller coded; 106 kbit/s VRX(p-p)= 1.5 V; SensMiller = 3 The minimum modulation voltage is valid for all modulation schemes except Miller coded signals. 10.20 Output pin characteristics for AUX1/AUX2 Table 31. PR533_SDS Product short data sheet COMPANY PUBLIC Output pin characteristics for AUX1/AUX2 Symbol Parameter Conditions Min Typ Max Unit VOH HIGH-level output voltage VDDD = 3 V; IOH = 4 mA VDDD 0.4 - VDDD V VOL LOW-level output voltage VDDD = 3 V; IOL = 4 mA VSSD - VSSD +0.4 V IOH HIGH-level output current VDDD= 3 V; VOH = VDDD 0.3 4 - - mA IOL LOW-level output current VDDD= 3 V; VOL = VDDD -0.3 4 - - mA ILI input leakage current RSTPD_N = 0 V 1 - +1 A Ci input capacitance - 2.5 - pF CL load capacitance - - 15 pF All information provided in this document is subject to legal disclaimers. Rev. 3.3. -- 20 October 2012 206433 (c) NXP B.V. 2012. All rights reserved. 24 of 35 PR533 NXP Semiconductors Contactless Interface Controller 10.21 Output pin characteristics for TX1/TX2 Table 32. Output pin characteristics for TX1/TX2 Symbol Parameter Conditions Min Typ Max Unit VOH HIGH-level output voltage VDD(TVDD) = 3 V; IO = 32 mA; CWGsN = Fh - - 150 mV VDD(TVDD) = 3 V; IO = 80 mA; CWGsN = Fh - - 400 mV VDD(TVDD) = 2.5 V; IO = 32 mA; CWGsN = Fh - - 240 mV VDD(TVDD) = 2.5 V; IO = 80 mA; CWGsN = Fh - - 640 mV Typ Max Unit VOL Table 33. LOW-level output voltage Output resistance for TX1/TX2 Symbol Parameter ROH ROL PR533_SDS Product short data sheet COMPANY PUBLIC HIGH-level output resistance Conditions1 CWGsP VDD(TVDD) = 3 V; VO = VDD(TVDD) 100 mV 01h 133 180 251 02h 67 90 125 04h 34 46 62 08h 17 23 31 LOW-level output resistance All information provided in this document is subject to legal disclaimers. Rev. 3.3. -- 20 October 2012 206433 Min 10h 8.5 12 15.5 20h 4.7 6 7.8 3Fh 2.3 3 4.4 10h 34 46 62 20h 17 23 31 40h 8.5 12 15.5 80h 4.7 6 7.8 F0h 2.3 3 4.4 (c) NXP B.V. 2012. All rights reserved. 25 of 35 PR533 NXP Semiconductors Contactless Interface Controller 10.22 System reset timing Vth(rst)reg + Vth(rst)reg(hys) VDD(PVDD) Vth(rst)reg(hys) RSTPD_N trst tw(rst) tPOR RSTOUT_N 001aao394 Fig 6. System reset overview Table 34. Reset duration time Symbol Parameter tPOR trst tw(rst) Min Typ Max Unit power-on reset time [1] 0.1 0.4 2 ms reset time hard power-down time; user dependent [2] 20 - - ns reset time when RSTPD_N is released [1] 0.1 0.4 2 ms reset pulse width Conditions [1] Dependent on the 27.12 MHz crystal oscillator startup time. [2] If the trst pulse is shorter than 20 ns, the device may be only partially reset. PR533_SDS Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.3. -- 20 October 2012 206433 (c) NXP B.V. 2012. All rights reserved. 26 of 35 PR533 NXP Semiconductors Contactless Interface Controller 10.23 Timing for the I2C-bus interface SDA tSU;DAT tf tSP tr tHD;STA tf tLOW tBUF SCL tr tHD;STA S tHIGH tSU;STA tHD;DAT tSU;STO Sr P S 001aaj635 Fig 7. Table 35. I2C-bus parameters I2C-bus timing specification Symbol Parameter fSCL tHD;STA Conditions Min Typ Max Unit SCL clock frequency 0 - 400 kHz hold time (repeated) START condi- after this period, the tion first clock pulse is generated 600 - - ns tSU;STA set-up time for a repeated START condition 600 - - ns tSU;STO set-up time for STOP condition 600 - - ns tLOW LOW period of the SCL clock P50_SCL 1300 - - ns tHIGH HIGH period of the SCL clock P50_SCL 600 - - ns tHD;DAT data hold time 0 - 900 ns tSU;DAT data set-up time tr rise time of both SDA and SCL sig- P50_SCL nals [1] tf fall time of both SDA and SCL sig- P50_SCL nals [1] tBUF bus free time between a STOP and START condition tstretch stretch time stretching time on P50_SCL when woken-up on its own address th hold time internal for SDA internal for SDA in SPD mode PR533_SDS Product short data sheet COMPANY PUBLIC [2] [3] 100 - - ns 20 - 300 ns 20 - 300 ns 1.3 - - ms - - 1 ms 330 - 590 ns - 270 - ns [1] The PR533 has a slope control according to the I2C-bus specification for the Fast mode. The slope control is always present and not dependent of the I2C-bus speed. [2] 27.12 MHz quartz starts in less than 800 s. For example, quartz like TAS-3225A, TAS-7 or KSS2F with appropriate layout. [3] The PR533 has an internal hold time of around 270 ns for the SDA signal to bridge the undefined region of the falling edge of P50_SCL. All information provided in this document is subject to legal disclaimers. Rev. 3.3. -- 20 October 2012 206433 (c) NXP B.V. 2012. All rights reserved. 27 of 35 PR533 NXP Semiconductors Contactless Interface Controller 10.24 Temperature sensor Table 36. Symbol Tth(act)otp [1] PR533_SDS Product short data sheet COMPANY PUBLIC Temperature sensor characteristics Parameter Conditions overtemperature protection activation threshold temperature CIU [1] Min Typ Max Unit 100 125 140 C The temperature sensor embedded in the PR533 is not intended to monitor the temperature. Its purpose is to prevent destruction of the IC due to excessive heat. The external application should include circuitry to ensure that the ambient temperature does not exceed 85 C as specified in Table 5 "Operating conditions". All information provided in this document is subject to legal disclaimers. Rev. 3.3. -- 20 October 2012 206433 (c) NXP B.V. 2012. All rights reserved. 28 of 35 PR533 NXP Semiconductors Contactless Interface Controller 11. Application information interface supply SVDD RSDA SIGOUT RSCL SDA SECURE CORE SIGIN l 2C MEMORY P50_SCL P34 CRX RX supply R1 R2 VMID VBUS CVMID DVDD antenna PR533 PVDD HOST - PROCESSOR TX1 C0 TVSS1 TVSS2 RTSPD_N C1 L0 C0 host interface TX2 P70_IRQ L0 RQ C2 C1 C2 RQ TVDD AVDD DVSS AVSS OSCIN OSCOUT 27.12 MHz aaa-000042 Fig 8. Application diagram of PR533 12. Abbreviations Table 37. PR533_SDS Product short data sheet COMPANY PUBLIC Abbreviations Acronym Description CDM Charge device Body Model CRC Cyclic Redundancy Check EEPROM Electrically Erasable Programmable Read-Only Memory HBM Human Body Model HPD Hard Power Down MM Machine Model NFC Near Field Communication SPD Soft Power Down mode All information provided in this document is subject to legal disclaimers. Rev. 3.3. -- 20 October 2012 206433 (c) NXP B.V. 2012. All rights reserved. 29 of 35 PR533 NXP Semiconductors Contactless Interface Controller 13. Revision history Table 38. Revision history Document ID Release date Data sheet status Change notice Supersedes PR533_SDS v.3.3 20121020 Product short data sheet - PR533_SDS v.3.2 - PR5331C3HN_SDS v.3.0 - - Modifications: PR533_SDS v.3.2 Modifications: * Section 14.4 "Licenses": updated 20120306 * * General update to comply full data sheet PR5331C3HN_SDS v.3.0 20110803 PR533_SDS Product short data sheet COMPANY PUBLIC Product short data sheet Section 4 "Ordering information": updated Product short data sheet All information provided in this document is subject to legal disclaimers. Rev. 3.3. -- 20 October 2012 206433 (c) NXP B.V. 2012. All rights reserved. 30 of 35 PR533 NXP Semiconductors Contactless Interface Controller 14. Legal information 14.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term `short data sheet' is explained in section "Definitions". [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 14.2 Definitions Draft -- The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet -- A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification -- The information and data provided in a Product data sheet shall define the specification of the product as agreed between NXP Semiconductors and its customer, unless NXP Semiconductors and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the NXP Semiconductors product is deemed to offer functions and qualities beyond those described in the Product data sheet. 14.3 Disclaimers Limited warranty and liability -- Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. NXP Semiconductors takes no responsibility for the content in this document if provided by an information source outside of NXP Semiconductors. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors' aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. Right to make changes -- NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. PR533_SDS Product short data sheet COMPANY PUBLIC Suitability for use -- NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors and its suppliers accept no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. Applications -- Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using NXP Semiconductors products, and NXP Semiconductors accepts no liability for any assistance with applications or customer product design. It is customer's sole responsibility to determine whether the NXP Semiconductors product is suitable and fit for the customer's applications and products planned, as well as for the planned application and use of customer's third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer's applications or products, or the application or use by customer's third party customer(s). Customer is responsible for doing all necessary testing for the customer's applications and products using NXP Semiconductors products in order to avoid a default of the applications and the products or of the application or use by customer's third party customer(s). NXP does not accept any liability in this respect. Limiting values -- Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale -- NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer's general terms and conditions with regard to the purchase of NXP Semiconductors products by customer. No offer to sell or license -- Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. All information provided in this document is subject to legal disclaimers. Rev. 3.3. -- 20 October 2012 206433 (c) NXP B.V. 2012. All rights reserved. 31 of 35 PR533 NXP Semiconductors Contactless Interface Controller Export control -- This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Quick reference data -- The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Non-automotive qualified products -- Unless this data sheet expressly states that this specific NXP Semiconductors product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. NXP Semiconductors accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without NXP Semiconductors' warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond NXP Semiconductors' specifications such use shall be solely at customer's own risk, and (c) customer fully indemnifies NXP Semiconductors for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond NXP Semiconductors' standard warranty and NXP Semiconductors' product specifications. Translations -- A non-English (translated) version of a document is for reference only. The English version shall prevail in case of any discrepancy between the translated and English versions. 14.4 Licenses Purchase of NXP ICs with ISO/IEC 14443 type B functionality This NXP Semiconductors IC is ISO/IEC 14443 Type B software enabled and is licensed under Innovatron's Contactless Card patents license for ISO/IEC 14443 B. The license includes the right to use the IC in systems and/or end-user equipment. RATP/Innovatron Technology Purchase of NXP ICs with NFC technology Purchase of an NXP Semiconductors IC that complies with one of the Near Field Communication (NFC) standards ISO/IEC 18092 and ISO/IEC 21481 does not convey an implied license under any patent right infringed by implementation of any of those standards. 14.5 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. MIFARE -- is a trademark of NXP B.V. I2C-bus -- logo is a trademark of NXP B.V. 15. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com PR533_SDS Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.3. -- 20 October 2012 206433 (c) NXP B.V. 2012. All rights reserved. 32 of 35 PR533 NXP Semiconductors Contactless Interface Controller 16. Tables Table 1. Table 2. Table 3. Table 4. Table 5. Table 6. Table 7. Table 8. Table 9. Table 10. Table 11. Table 12. Table 13. Table 14. Table 15. Table 16. Table 17. Table 18. Table 19. Table 20. Table 21. Table 22. Table 23. Table 24. Table 25. Table 26. Table 27. Table 28. Table 29. Table 30. Table 31. Table 32. Table 33. Table 34. Table 35. Table 36. Table 37. Table 38. Quick reference data . . . . . . . . . . . . . . . . . . . . .3 Ordering information . . . . . . . . . . . . . . . . . . . . .4 PR533 pin description . . . . . . . . . . . . . . . . . . . .5 Limiting values . . . . . . . . . . . . . . . . . . . . . . . . . .7 Operating conditions . . . . . . . . . . . . . . . . . . . . .8 Thermal characteristics . . . . . . . . . . . . . . . . . . .8 Current consumption characteristics . . . . . . . . .9 Voltage regulator characteristics[1] . . . . . . . . . . .9 Antenna presence detection . . . . . . . . . . . . . . .10 Crystal requirements. . . . . . . . . . . . . . . . . . . . . 11 Pin characteristics for 27.12 MHz XTAL Oscillator (OSCIN, OSCOUT). . . . . . . . . . . . . . 11 RSTPD_N input pin characteristics . . . . . . . . .12 Input pin characteristics for I0, I1 and TESTEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 RSTOUT_N output pin characteristics . . . . . . .13 Input/output pin characteristics for pin P70_IRQ . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Input/output pin characteristics for P30 / UART_RX, P31 / UART_TX, P32_INT0, P33_INT1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Input/output pin characteristics for P35 . . . . . .16 Input/output pin characteristics for DP and DM for USB interface . . . . . . . . . . . . . . . . . . . .17 USB DP/DM differential receiver input levels . .18 USB DP/DM driver characteristics . . . . . . . . . .18 Input Pin characteristics for DP for HSU interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Output Pin characteristics for DM for HSU interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Input/output drain output pin characteristics for SCL I2C interface. . . . . . . . . . . . . . . . . . . . .20 Input/output drain output pin characteristics for SDA I2C interface . . . . . . . . . . . . . . . . . . . .20 Output pin characteristics for DELATT . . . . . . .21 Input/output pin characteristics for SIGIN . . . . .21 Output pin characteristics for SIGOUT . . . . . . .21 Input/output pin characteristics for P34 . . . . . .22 Output pin characteristics for LOADMOD . . . .22 Input pin characteristics for RX . . . . . . . . . . . .23 Output pin characteristics for AUX1/AUX2 . . .24 Output pin characteristics for TX1/TX2. . . . . . .25 Output resistance for TX1/TX2 . . . . . . . . . . . . .25 Reset duration time . . . . . . . . . . . . . . . . . . . . .26 I2C-bus timing specification . . . . . . . . . . . . . . .27 Temperature sensor characteristics . . . . . . . . .28 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . .29 Revision history . . . . . . . . . . . . . . . . . . . . . . . .30 PR533_SDS Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.3. -- 20 October 2012 206433 (c) NXP B.V. 2012. All rights reserved. 33 of 35 PR533 NXP Semiconductors Contactless Interface Controller 17. Figures Fig 1. Fig 2. Fig 3. Fig 4. Fig 5. Fig 6. Fig 7. Fig 8. Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Pin configuration for HVQFN 40 (SOT618-1) . . . .5 27.12 MHz input clock phase noise spectrum mask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Transmit waveform at DP/DM . . . . . . . . . . . . . . .18 RX input parameters . . . . . . . . . . . . . . . . . . . . . .23 System reset overview. . . . . . . . . . . . . . . . . . . . .26 I2C-bus parameters . . . . . . . . . . . . . . . . . . . . . . .27 Application diagram of PR533 . . . . . . . . . . . . . . .29 PR533_SDS Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.3. -- 20 October 2012 206433 (c) NXP B.V. 2012. All rights reserved. 34 of 35 PR533 NXP Semiconductors Contactless Interface Controller 18. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 6.1 6.2 7 8 9 10 10.1 10.1.1 10.1.2 10.2 10.3 10.4 10.5 10.6 10.7 10.8 10.9 10.10 10.11 10.12 10.13 10.14 10.15 10.16 10.17 10.18 10.19 10.20 10.21 10.22 10.23 10.24 General description . . . . . . . . . . . . . . . . . . . . . . 1 RF protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Standards compliancy. . . . . . . . . . . . . . . . . . . . 1 Supported operating systems . . . . . . . . . . . . . . 2 Features and benefits . . . . . . . . . . . . . . . . . . . . 2 Quick reference data . . . . . . . . . . . . . . . . . . . . . 3 Ordering information . . . . . . . . . . . . . . . . . . . . . 4 Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Pinning information . . . . . . . . . . . . . . . . . . . . . . 5 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 5 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 7 Recommended operating conditions. . . . . . . . 8 Thermal characteristics . . . . . . . . . . . . . . . . . . 8 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Power management characteristics . . . . . . . . . 8 Current consumption characteristics . . . . . . . . 8 Voltage regulator characteristics. . . . . . . . . . . . 9 Antenna presence self test thresholds . . . . . . . 9 Typical 27.12 MHz Crystal requirements . . . . 11 Pin characteristics for 27.12 MHz XTAL Oscillator (OSCIN, OSCOUT). . . . . . . . . . . . . 11 RSTPD_N input pin characteristics . . . . . . . . 12 Input pin characteristics for I0, I1 and TESTEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 RSTOUT_N output pin characteristics . . . . . . 13 Input/output characteristics for pin P70_IRQ . 14 Input/output pin characteristics for P30 / UART_RX, P31 / UART_TX, P32_INT0, P33_INT1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Input/output pin characteristics for P35 . . . . . 16 Input/output pin characteristics for DP and DM 17 Input pin characteristics for SCL. . . . . . . . . . . 20 Input/output pin characteristics for SDA . . . . . 20 Output pin characteristics for DELATT . . . . . . 21 Input pin characteristics for SIGIN . . . . . . . . . 21 Output pin characteristics for SIGOUT . . . . . . 21 Input/output pin characteristics for P34 . . . . . 22 Output pin characteristics for LOADMOD. . . . 22 Input pin characteristics for RX. . . . . . . . . . . . 23 Output pin characteristics for AUX1/AUX2 . . . 24 Output pin characteristics for TX1/TX2. . . . . . 25 System reset timing . . . . . . . . . . . . . . . . . . . . 26 Timing for the I2C-bus interface . . . . . . . . . . . 27 Temperature sensor . . . . . . . . . . . . . . . . . . . . 28 11 12 13 14 14.1 14.2 14.3 14.4 14.5 15 16 17 18 Application information . . . . . . . . . . . . . . . . . Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . Revision history . . . . . . . . . . . . . . . . . . . . . . . Legal information . . . . . . . . . . . . . . . . . . . . . . Data sheet status . . . . . . . . . . . . . . . . . . . . . . Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . Licenses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . Contact information . . . . . . . . . . . . . . . . . . . . Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 29 30 31 31 31 31 32 32 32 33 34 35 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section `Legal information'. (c) NXP B.V. 2012. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 20 October 2012 206433