®
RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 E-mail: info@rfm.com Page 1 of 3
RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 http://www.rfm.com
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. SF2059B-1-021407
Notes:
1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to
50 Ω and measured with 50 Ω network analyzer.
2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc.
3. The design, manufacturing process, and specifications of this filter are subject to change.
4. Tape and Reel Standard Per ANSI / EIA 481.
5. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that
the filter must always be installed in one direction per the circuit design.
6. US and international patents may apply.
7. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc.
8. ©Copyright 1999, RF Monolithics Inc.
9. Electrostatic Sensitive Device. Observe precautions for handling.
Electrical Characteristics
Characteristic Sym Notes Min Typ Max Units
Nominal Center Frequency fC1137.50 MHz
Passband Minimum Insertion Loss IL 8.3 9.1 dB
1 dB Passband BW11, 2 0.8 0.86 MHz
3 dB Passband BW311.0
Amplitude Ripple from 137.1 to 137.9 MHz 1, 2 0.85 1.3 dBP-P
40 dB Bandwidth 2.2 3.5 MHz
Operating Temperature Range TA1-40 +85 °C
Differential Input and Output Impedance L & C Match to 50 ohms
Case Style 5SMP-03 7 x 5 mm Nominal Footprint
Lid Symbolization (YY=year, WW=week, S=shift) See note 4 RFM SF2059B-1 YYWWS##
SMP-03
•Low Insertion Loss
•5.0 X 7.0 mm Surface-Mount Case
•Differential Input and Output
•Complies with Directive 2002/95/EC (RoHS)
Absolute Maximum Ratings
Rating Value Units
Maximum Incident Power in Passband +10 dBm
Max. DC voltage between any 2 terminals 30 VDC
Storage Temperature Range -40 to +85 °C
Max Soldering Temperature 265°C for 10 s
137.50 MHz
SAW Filter
SF2059B-1
Pb
137.50 MHz SAW Filter
RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 E-mail: info@rfm.com Page 2 of 3
RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 http://www.rfm.com
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. SF2059B-1-021407
SMP-03 Case
Recommended PCB Footprint
Case Dimensions
Dimension mm Inches
Min Nom Max Min Nom Max
A6.80 7.00 7.20 0.268 0.276 0.283
B4.80 5.00 5.20 0.189 0.197 0.205
C1.50 1.65 2.00 0.059 0.065 0.079
D.47 0.60 .73 0.019 0.024 0.029
E2.41 2.54 2.67 0.095 0.100 0.105
H0.87 1.0 1.13 0.034 0.039 0.044
J4.87 5.00 5.13 0.192 0.197 0.202
K2.87 3.00 3.13 0.113 0.118 0.123
P1.14 1.27 1.40 0.045 0.050 0.055
Materials
Solder Pad
Termination Au plating 30 - 60 µinches (76.2-152 µm) over 80-
200 µinches (203-508 µm) Ni.
Lid Fe-Ni-Co Alloy Electroless Nickel Plate (8-11%
Phosphorus) 100-200 µinches Thick
Body Al2O3 Ceramic
Pb Free
ElectricalConnections
Connection Terminals
Port 1 Input or Return 10
Return or Input 1
Port 2 Output or Return 5
Return or Output 6
Ground All others
Single Ended Operation Return is ground
Differential Operation Return is hot
A
BCHE
P
D
H
J
K
10-Terminal Ceramic Surface-Mount Case
7 x 5 mm Nominal Footprint
RFM
SF2059B-1
YYWWS##
137.50 MHz SAW Filter
RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 E-mail: info@rfm.com Page 3 of 3
RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 http://www.rfm.com
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. SF2059B-1-021407
Tape and Reel Specifications
“B “
Nominal Size Quantity Per Reel
Inches millimeters
7 178 500
13 330 2000
USER DIRECTION OF FEED
COMPONENT ORIENTATION and DIMENSIONS
Carrier Tape Dimensions
Ao 5.5 mm
Bo 7.5 mm
Ko 2.0 mm
Pitch 8.0 mm
W16.0 mm
PIN #1
See Detail "A"
13.0
20.2
2.0
12.0
100 REF.
"B" REF.
16.0
