76
SCREW TERMINAL TYPE ALUMINUM ELECTROLYTIC CAPACITORS
Hitachi AIC Inc.
Ripple current correction coefficient
Product Specifications
HCGHA Series Useful of 4,000 hours at 105°C (Warranty of 2,000 hours at 105°C)
•Conform RoHS
Features
•Warranty life of 2000 hours at 105°C through
improvement of electrolyte liquid
Ripple current should be under 60 Arms at M5 terminal in
accordance with from the permissible current.
Temperature (°C)
40
4.9
3.8
50/60
0.8
55
3.9
3.3
120
1.0
70
3.0
2.5
300
1.1
85
1.8
2.0
1K
1.3
105
1.0
1.0
≧10K
1.4
Correction
coefficient
250WV under
400WV
Frequency (Hz)
Correction coefficient
Items
Temperature range
Capacitance tolerance
Rated voltage
Dissipation factor
Permissible ripple current
Others
High-temperature load
Leakage current
Specifications
–40°C ~ +105°C
±20% (20°C,120Hz)
25 ~ 400V.DC
JIS C 5101-4.
After the rated voltage with specified ripple current is applied at 105°C for 2000 hours:
Capacitance tolerance: ±15% or less of the initial value
Dissipation factor: 175% or less of the specified initial value
Leakage current: Specified initial value or less
Less than the value specified in the standard products table. (20˚C,120Hz)
As specified in the standard products table. (105
˚C
,120Hz)
0.01CV (µA) or 5mA, whichever is smaller or less
[C = nominal capacitance (µF), V = rated voltage (V)]
Bracket
• See page 51 for shapes and dimensions.
• Product names in the Standard Products Table correspond to the
bracket for Type Y (Type Ιfor ø36 only), but Type Ιbracket may be
used (Type of bracket Code = Ι ).
• If bracket are not necessary, enter "N" for the type of bracket code.
• Bracket will be delivered separately.