SHIELD | 1000pF; 2KV P P @@ /@|@|@ P 1 ELECTRICAL SPECIFICATIONS: NOTES 1.0 TURNS RATIO: (P6P5P4) : (J6JS > 1CT : 1CT 3% WINNER TTON ARE EMESTED P3-P2P1) : (WJ2-u1 > 1CT : 1CT + 3% ' 2.0 INDUCTANCE: PSB : J350uH MIN. @ 0.1V, 100KHz, 8mA DC Bias P3-P1 : 3550uH MIN. @ 0.1V, 100KHz, 8mA DC Bias 3.0 LEAKAGE INDUCTANCE: P6P4 (WITH J6 AND J3 SHORT : O.3 MAX. @ 1MHz P3P1 (WITH J2 AND J1 SHORT : 0.3 MAX. @ 1MHz 4.0 INTERWINDING CAPACITANCE: (P6,P5,P4) TO (J6,J3 : JOpf MAX @ 1MHz P3,P2,P1) TO (J2,J1 : 3Opf MAX. @ 1MHZ 5.0 DC RESISTANCE: (J6J3)=(J2J1) : 1.2 ohms Max. Bel Stewart Connector 11118 Susquehanna Trail, South Glen Rock, Pa 17327-9199 717.234.7512 hitp://www.stewartconnector.com SHEET DRAWING NO. REV. ONNECTOR AND SHALL NOT BE REPRODUCED, COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN CONTEN 1 OF 4 S|60126F 5 THIS DRAWING AND THE SUBJECT MATTER SHOWN THEREON ARE CONFIDENTIAL AND PROPERTY OF BEL STEWART OF BEL STEWART CONNECTOR, THE SUBJECT MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING. 6.0 7.0 8.0 9.0 RETURN LOSS: 1MHz TO 3OMHz 60MHz TO 80MHz NOTE: 100 OHMS CONNECTED TO (J2J1) OR (J6J3). DIELECTRIC WITHSTAND: (J1, J2) TO (P1, P3) J3, J6) TO (P4,P6) INSERTION LOSS: RS=RL=100 ohms 100KHz TO 100MHz RISE TIME: RS=100 OHMS AND RL = 100 OHMS OUTPUT VOLTAGE = 1 V peak PULSE WIDTH= 112nS 10.0 CROSS TALK: 1MHz TO 100MHz 11.0 COMMON TO COMMON MODE ATTENUATION: 3OMHz TO 100MHz RECEIVE 18dB MIN. 12dB MIN. 1500 VAC 1500 VAC 1.1 dB TYP 35.0 nS MAX 3.0 nS MAX 40 dB TYP 35dB TYP Bel Stewart Connector MagJad 11118 Susquehanna Trail, South Glen Rock, Pa 17327-9199 717.234.7512 hitp://www.stewarteonnector.com THIS DRAWING AND THE SUBJECT MATTER SHOWN THEREON ARE CONFIDENTIAL AND PROPERTY OF BEL STEWART ONNECTOR AND SHALL NOT BE REPRODUCED, COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN CONTENT) SHEET DRAWING NO. S|60126F me 4 OF BEL STEWART CONNECTOR, THE SUBJECT MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING. 2 OF 3 _ _ LED SPECIFICATION STANDARD LED WAVELENGTH Forward V (MAX) * (TP) GREEN 565 nm 2.9 V 2.2 V *WITH A FORWARD CURRENT OF 20 mA (TYP) .635 [16.13] MAX. Part Number CNTRY YYWW FC Bel Stewart 9128 9.035 [0.89] +.003 [0.08] (8) 006 [0.15] 050 [1.27] TYP 025 [0.64] r [2.54] TYP PIN P1 (SIGNAL)! No fle a #.062 [1.57] +.003 [0.08] (2) (SHE) Nb 100 [2.54] & _ <P- | 950 [6.35] 120 [3.05] | * 2251 gen SP tf 160 [4.06] 125 [3.18] [006 [0.15] yO) O- .040 [1.02] 4.003 [0.08] (4) (LEDS) S| y 322 [8.18] L 006 [0.15] 50 [It | .850 [21.59] MAX. i ., > oHS 2002/95/EC ( .708 [17.98] )~ 450 [11.43] 522 [13.26] -| |__ 610 [15.49] ____| P.C.B. RECOMMENDED HOLE LAYOUT SEEN FROM COMPONENT SIDE ALL CENTERLINE DIMENSIONS ARE BASIC. 148 [3.75] HIGHEST POINT F BEAM NOTES: 1. CONNECTOR MATERIALS: HOUSING: THERMOPLASTIC UL94 V0 CONTACT/SHIELD: COPPER ALLOY SHIELD PLATING: NICKEL OR TIN CONTACT PLATING: SELECTIVE GOLD, 50 MICRO-INCHES MIN. IN CONTACT AREA. 2. PIN NOT ELECTRICALLY CONNECTED MAYBE OMITTED. | | SEE ELECTRICAL DRAWING FOR OMITTED PINS. | i 3. TOLERANCES COMPLY WITH F.C.C. DIMENSION REQUIREMENTS. a5 T0797 .040 [1.02] +.005 ALL TOLERANCES NOT OTHERWISE SPECIFIED TO BE +.005 [0.13] , ae 5. WAVE SOLDER COMPATIBLE PREHEAT 125C/90SECS. MagJad hitp://www.stewartconnector.com i * .110-.150 [2.80-3.81] 1 599 [15.21] REF. ||.014 [0.36] REF 083 [2.12] ~} HIGHEST POINT OF BEAM L. 450 [11. wf +.005 > Bel Stewart Connector 11118 Susquehanna Trail, South Glen Rock, Pa 17327-9199 717.234.7512 SHEET 5 OF 4 DRAWING NO. SI60126F ONNECTOR AND SHALL NOT BE REPRODUCED, COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN CONTENT OF BEL STEWART CONNECTOR. Es DRAWING AND THE SUBJECT MATTER SHOWN THEREON ARE CONFIDENTIAL AND PROPERTY OF BEL STEWART OQ THE SUBJECT MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING. POINT OF CONTACT WITH PANEL LY | 080 [2.03] L 000 (TOP OF PCB TO BOTTOM OF OPENING) 010 [0.25] MAX. RADIUS(4) 975 [6.99] MAX SUGGESTED PANEL OPENING 1. THE SUGGESTED PANEL OPENING IS INTENDED TO GIVE THE USER THE ABILITY TO HAVE REASONABLE JACK / PANEL CLEARANCES YET MAINTAIN RELIABLE GROUNDING CAPABILITY. 2. ALL TOLERANCES NOT OTHERWISE SPECIFIED TO BE +.005 [0.13] Bel Stewart Connector 11118 Susquehanna Trail, South Glen Rock, Pa 17327-9199 717.234.7512 hitp://www.stewartconnector.com THIS DRAWING AND THE SUBJECT MATTER SHOWN THEREON ARE CONFIDENTIAL AND PROPERTY OF BEL STEWART ONNECTOR AND SHALL NOT BE REPRODUCED, COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN CONTENT) SU&T OF BEL STEWART CONNECTOR. DRAWING NO. 4 OF 4 SI-60126F |" O9 THE SUBJECT MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING.