SO T4 16 BAS116T Single low leakage current switching diode Rev. 2 -- 9 July 2012 Product data sheet 1. Product profile 1.1 General description Single low leakage current switching diode, encapsulated in an ultra small SOT416 (SC-75) Surface-Mounted Device (SMD) plastic package. 1.2 Features and benefits High switching speed: trr = 0.8 s Low leakage current: 3 pA Repetitive peak reverse voltage: VRRM 85 V AEC-Q101 qualified Low capacitance: Cd = 2 pF Reverse voltage: VR 75 V Ultra small SMD plastic package 1.3 Applications Low leakage current applications General-purpose switching Voltage clamping Reverse polarity protection 1.4 Quick reference data Table 1. Quick reference data Symbol Parameter IF forward current IR reverse current VR reverse voltage trr reverse recovery time Conditions [1] VR = 75 V [2] Min Typ Max Unit - - 215 mA - - 5 nA - - 75 V - - 3 s [1] Pulse test: tp 300 s; 0.02. [2] When switched from IF = 10 mA to IR = 10 mA; RL = 100 ; measured at IR = 1 mA. 2. Pinning information Table 2. Pinning Pin Description 1 anode 2 not connected 3 cathode Simplified outline Graphic symbol 3 3 1 2 006aaa764 1 2 BAS116T NXP Semiconductors Single low leakage current switching diode 3. Ordering information Table 3. Ordering information Type number BAS116T Package Name Description Version SC-75 plastic surface-mounted package; 3 leads SOT416 4. Marking Table 4. Marking codes Type number Marking code BAS116T ZY 5. Limiting values Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). BAS116T Product data sheet Symbol Parameter Conditions VRRM repetitive peak reverse voltage VR reverse voltage Min Max Unit - 85 V - 75 V - 215 mA - 500 mA tp = 1 s - 4 A tp = 1 ms - 1 A tp = 1 s - 0.5 A - 150 mW [1] IF forward current IFRM repetitive peak forward current IFSM non-repetitive peak forward current square wave Tamb 25 C [2] [3] Ptot total power dissipation Tj junction temperature - 150 C Tamb ambient temperature 55 +150 C Tstg storage temperature 65 +150 C [1] Pulse test: tp 300 s; 0.02. [2] Tj = 25 C before surge. [3] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint. All information provided in this document is subject to legal disclaimers. Rev. 2 -- 9 July 2012 (c) NXP B.V. 2012. All rights reserved. 2 of 10 BAS116T NXP Semiconductors Single low leakage current switching diode 6. Thermal characteristics Table 6. Symbol Thermal characteristics Parameter Conditions Rth(j-a) thermal resistance from junction to ambient Rth(j-sp) thermal resistance from junction to solder point in free air Min Typ Max Unit [1] - - 833 K/W [2] - - 350 K/W [1] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint. [2] Soldering point of cathode tab. 7. Characteristics Table 7. Characteristics Tamb = 25 C unless otherwise specified. Symbol VF IR BAS116T Product data sheet Parameter Conditions Min Typ Max Unit [1] forward voltage reverse current trr reverse recovery time Cd diode capacitance IF = 1 mA - - 0.9 V IF = 10 mA - - 1 V IF = 50 mA - - 1.1 V IF = 150 mA - - 1.25 V VR = 75 V - 0.003 5 nA VR = 75 V; Tj = 150 C - 3 80 nA - 0.8 3 s - 2 - pF [2] VR = 0 V; f = 1 MHz [1] Pulse test: tp 300 s; 0.02. [2] When switched from IF = 10 mA to IR = 10 mA; RL = 100 ; measured at IR = 1 mA. All information provided in this document is subject to legal disclaimers. Rev. 2 -- 9 July 2012 (c) NXP B.V. 2012. All rights reserved. 3 of 10 BAS116T NXP Semiconductors Single low leakage current switching diode mlb755 300 mlb752 300 IF (mA) IF (mA) 200 200 100 100 (1) (2) (3) 0 0 0 100 Tamb (C) 0 200 0.4 0.8 1.2 VF (V) 1.6 (1) Tamb = 150 C; typical values FR4 PCB, standard footprint (2) Tamb = 25 C; typical values (3) Tamb = 25 C; maximum values Fig 1. Forward current as a function of ambient temperature; derating curve Fig 2. Forward current as a function of forward voltage mbg704 102 IFSM (A) 10 1 10-1 1 10 102 103 104 tp (s) Based on square wave currents. Tj = 25 C before surge Fig 3. Non-repetitive peak forward current as a function of pulse duration; maximum values BAS116T Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 -- 9 July 2012 (c) NXP B.V. 2012. All rights reserved. 4 of 10 BAS116T NXP Semiconductors Single low leakage current switching diode mlb754 102 mbg526 2 IR (nA) (1) 10 Cd (pF) 1 1 10-1 (2) 10-2 10-3 0 0 50 100 150 Tj (C) 200 0 5 10 15 VR (V) 20 f = 1 MHz; Tamb = 25 C VR = 75 V (1) Maximum values (2) Typical values Fig 4. Reverse current as a function of junction temperature Fig 5. Diode capacitance as a function of reverse voltage; typical values 8. Test information tr tp t D.U.T. 10 % + IF IF RS = 50 SAMPLING OSCILLOSCOPE V = VR + IF x RS trr t Ri = 50 VR (1) 90 % mga881 input signal output signal (1) IR = 1 mA Fig 6. Reverse recovery time test circuit and waveforms 8.1 Quality information This product has been qualified in accordance with the Automotive Electronics Council (AEC) standard Q101 - Stress test qualification for discrete semiconductors, and is suitable for use in automotive applications. BAS116T Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 -- 9 July 2012 (c) NXP B.V. 2012. All rights reserved. 5 of 10 BAS116T NXP Semiconductors Single low leakage current switching diode 9. Package outline 0.95 0.60 1.8 1.4 3 0.45 0.15 1.75 0.9 1.45 0.7 1 2 0.30 0.15 0.25 0.10 1 Dimensions in mm Fig 7. 04-11-04 Package outline SOT416 (SC-75) 10. Packing information Table 8. Packing methods The indicated -xxx are the last three digits of the 12NC ordering code.[1] Type number BAS116T [1] Package Description SOT416 Packing quantity 4 mm pitch, 8 mm tape and reel 3000 10000 -115 -135 For further information and the availability of packing methods, see Section 14. 11. Soldering 2.2 1.7 solder lands solder resist 1 0.85 2 solder paste 0.5 (3x) occupied area Dimensions in mm 0.6 (3x) 1.3 Fig 8. BAS116T Product data sheet sot416_fr Reflow soldering footprint SOT416 (SC-75) All information provided in this document is subject to legal disclaimers. Rev. 2 -- 9 July 2012 (c) NXP B.V. 2012. All rights reserved. 6 of 10 BAS116T NXP Semiconductors Single low leakage current switching diode 12. Revision history Table 9. Revision history Document ID Release date Data sheet status Change notice Supersedes BAS116T v.2 20120709 Product data sheet - BAS116T v.1 Modifications: BAS116T v.1 BAS116T Product data sheet * * * Section 2 "Pinning information": corrected graphic symbol Section 8.1 "Quality information": added Section 13 "Legal information": updated 20091214 Product data sheet - All information provided in this document is subject to legal disclaimers. Rev. 2 -- 9 July 2012 - (c) NXP B.V. 2012. All rights reserved. 7 of 10 BAS116T NXP Semiconductors Single low leakage current switching diode 13. Legal information 13.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term `short data sheet' is explained in section "Definitions". [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 13.2 Definitions Draft -- The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet -- A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification -- The information and data provided in a Product data sheet shall define the specification of the product as agreed between NXP Semiconductors and its customer, unless NXP Semiconductors and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the NXP Semiconductors product is deemed to offer functions and qualities beyond those described in the Product data sheet. 13.3 Disclaimers Limited warranty and liability -- Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. NXP Semiconductors takes no responsibility for the content in this document if provided by an information source outside of NXP Semiconductors. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors' aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. Right to make changes -- NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. BAS116T Product data sheet Suitability for use in automotive applications -- This NXP Semiconductors product has been qualified for use in automotive applications. Unless otherwise agreed in writing, the product is not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors and its suppliers accept no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. Applications -- Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using NXP Semiconductors products, and NXP Semiconductors accepts no liability for any assistance with applications or customer product design. It is customer's sole responsibility to determine whether the NXP Semiconductors product is suitable and fit for the customer's applications and products planned, as well as for the planned application and use of customer's third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer's applications or products, or the application or use by customer's third party customer(s). Customer is responsible for doing all necessary testing for the customer's applications and products using NXP Semiconductors products in order to avoid a default of the applications and the products or of the application or use by customer's third party customer(s). NXP does not accept any liability in this respect. Limiting values -- Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale -- NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer's general terms and conditions with regard to the purchase of NXP Semiconductors products by customer. All information provided in this document is subject to legal disclaimers. Rev. 2 -- 9 July 2012 (c) NXP B.V. 2012. All rights reserved. 8 of 10 BAS116T NXP Semiconductors Single low leakage current switching diode No offer to sell or license -- Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Quick reference data -- The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Export control -- This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. 13.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 14. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com BAS116T Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 -- 9 July 2012 (c) NXP B.V. 2012. All rights reserved. 9 of 10 BAS116T NXP Semiconductors Single low leakage current switching diode 15. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 8.1 9 10 11 12 13 13.1 13.2 13.3 13.4 14 15 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description . . . . . . . . . . . . . . . . . . . . . 1 Features and benefits . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 1 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2 Thermal characteristics . . . . . . . . . . . . . . . . . . 3 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Test information . . . . . . . . . . . . . . . . . . . . . . . . . 5 Quality information . . . . . . . . . . . . . . . . . . . . . . 5 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 6 Packing information . . . . . . . . . . . . . . . . . . . . . 6 Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . 7 Legal information. . . . . . . . . . . . . . . . . . . . . . . . 8 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 8 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Contact information. . . . . . . . . . . . . . . . . . . . . . 9 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section `Legal information'. (c) NXP B.V. 2012. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 9 July 2012 Document identifier: BAS116T