OMA160 Single Pole, Normally Open OptoMOS(R) Relay INTEGRATED CIRCUITS DIVISION Parameter Blocking Voltage Load Current On-Resistance (max) Rating 250 50 100 Units VP mArms / mADC Description OMA160 is a 250V, 50mA, 100 normally open (1-Form-A) relay. This high performance, optically isolated Solid State Relay provides one of the fastest (0.125ms) switching times available along with a very low off-state leakage current of 25nA. Features * * * * * * * * * * * * Fast Switching Times: 0.125ms Low Off-State Leakage Current: 25nA 3750Vrms Input/Output Isolation 100% Solid State Low Drive Power Requirements (TTL/CMOS Compatible) Arc-Free With No Snubbing Circuits FCC Compatible VDE Compatible No EMI/RFI Generation Small 6-Pin Package Machine Insertable, Wave Solderable Tape & Reel Version Available Approvals * UL Recognized Component: File E76270 * CSA Certified Component: Certificate # 1175739 * EN/IEC 60950-1 Certified Component: TUV Certificate B 09 07 49410 004 Ordering Information Part Number OMA160 OMA160S OMA160STR Description 6-Pin DIP (50/Tube) 6-Pin Surface Mount (50/Tube) 6-Pin Surface Mount (1000/Reel) Pin Configuration AC/DC Configuration 1 6 Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hook Switch * Dial Pulsing * Ground Start * Ringing Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment - Patient/Equipment Isolation * Security * Aerospace * Industrial Controls + Control - Control Do Not Use 2 5 3 4 Load Do Not Use Load DC Only Configuration + Control - Control Do Not Use 1 6 2 5 3 4 + Load - Load Switching Characteristics of Normally Open Devices Form-A IF 90% 10% ILOAD ton Pb DS-OMA160-R11 toff e3 www.ixysic.com 1 INTEGRATED CIRCUITS DIVISION OMA160 Absolute Maximum Ratings @ 25C Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Ratings 250 5 50 1 150 800 3750 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate linearly 1.33 mW / C Derate linearly 6.67 mW / C 2 Electrical Characteristics @ 25C Parameter Output Characteristics Load Current, Continuous AC/DC Configuration DC Configuration Peak On-Resistance AC/DC Configuration DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current to Activate Input Control Current to Deactivate Input Voltage Drop Reverse Input Current Common Characteristics Input to Output Capacitance 2 Conditions Symbol Min Typ - IL - - t=10ms ILPK - RON - ILEAK IL=50mA IL=80mA VL=250VP Max Units - 50 80 100 mArms / mADC mADC mAP 100 30 25 - 50 15 - nA - - 0.125 ms - 5 - pF VL=50V, f=1MHz ton toff COUT IL=50mA IF=10mA VR=5V IF IF VF IR 0.4 0.9 - 1.2 - 10 1.4 10 mA mA V A - CI/O - 3 - pF IF=10mA, VL=10V www.ixysic.com R11 INTEGRATED CIRCUITS DIVISION OMA160 PERFORMANCE DATA @25C (Unless Otherwise Noted)* Typical LED Forward Voltage Drop (N=50, IF=10mA) 35 30 20 15 10 Device Count (N) 25 20 15 10 5 5 0 0 1.17 1.21 1.23 20 15 10 5 0 0.05 1.25 0.07 0.09 0.11 0.13 0.012 0.15 0.017 0.022 0.027 0.032 0.037 LED Forward Voltage Drop (V) Turn-On Time (ms) Turn-Off Time (ms) Typical IF for Switch Operation (N=50, IL=50mADC) Typical IF for Switch Dropout (N=50, IL=50mADC) Typical On-Resistance Distribution (N=50, IF=10mA, IL=50mADC) 25 Device Count (N) 20 15 10 5 0 35 30 20 Device Count (N) 25 1.19 Typical Turn-Off Time (N=50, IF=10mA, IL=50mADC) 25 25 Device Count (N) Device Count (N) 30 Device Count (N) Typical Turn-On Time (N=50, IF=10mA, IL=50mADC) 15 10 5 2.075 2.525 2.975 3.425 3.875 20 15 10 5 0 1.625 25 0 1.625 2.075 LED Current (mA) 2.525 2.975 3.425 3.875 42.5 43.5 44.5 45.5 46.5 47.5 On-Resistance (:) LED Current (mA) Typical Blocking Voltage Distribution (N=50) 35 Device Count (N) 30 25 20 15 10 5 0 367.5 374.5 381.5 388.5 395.5 402.5 Blocking Voltage (VP) Typical Turn-On Time vs. LED Forward Current (IL=50mADC) 0.18 1.8 Typical Turn-Off Time vs. LED Forward Current (IL=50mADC) 0.040 0.16 1.4 I F =50mA I F =30mA I F =20mA I F =10mA I F =5mA 1.2 1.0 0.14 Turn-Off Time (ms) 1.6 Turn-On Time (ms) LED Forward Voltage Drop (V) Typical LED Forward Voltage Drop vs. Temperature 0.12 0.10 0.08 0.06 0.04 0 20 40 60 Temperature (C) 80 100 0.025 0.020 0.015 0 -20 0.030 0.02 0.8 -40 0.035 120 0 5 10 15 20 25 30 35 40 LED Forward Current (mA) 45 50 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R11 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION OMA160 PERFORMANCE DATA @25C (Unless Otherwise Noted)* 1.50 Turn-Off Time (ms) 1.00 0.75 IF=10mA 0.50 IF=20mA 0.25 0 -40 Load Current (mA) 0 20 40 60 80 100 60 50 40 30 20 10 0 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 Temperature (C) Temperature (C) Typical IF for Switch Operation vs. Temperature (IL=50mADC) Typical IF for Switch Dropout vs. Temperature Typical Load Current vs. Load Voltage (IF=10mA) -20 0 20 40 60 80 Load Current (mA) 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 -40 100 -20 0 20 40 60 80 100 -3 -2 -1 0 1 2 Temperature (C) Load Voltage (V) Maximum Load Current vs. Temperature Typical Blocking Voltage vs. Temperature Typical Leakage vs. Temperature Measured Across Pins 4&6 I F =30mA I F =20mA I F =10mA 400 0.014 395 0.012 390 0.010 385 380 375 370 0 20 40 60 80 100 120 -40 Temperature (C) 3 0.008 0.006 0.004 0.002 365 -20 50 40 30 20 10 0 -10 -20 -30 -40 -50 Temperature (C) 100 90 80 70 60 50 40 30 20 10 0 -40 Typical On-Resistance vs. Temperature (IF=5mA, IL=50mADC) Temperature (C) LED Current (mA) 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 -20 Blocking Voltage (VP) LED Current (mA) -40 70 Leakage (PA) Turn-On Time (ms) 1.25 0.050 0.045 0.040 0.035 0.030 0.025 0.020 0.015 0.010 0.005 0 -40 Typical Turn-Off Time vs. Temperature (IF=10mA, IL=50mADC) On-Resistance (:) Typical Turn-On Time vs. Temperature (IL=50mADC) -20 0 20 40 60 80 100 Temperature (C) 0 -40 -20 0 20 40 60 80 100 Temperature (C) Energy Rating Curve 0.45 Load Current (A) 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 10Ps 100Ps 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.ixysic.com R11 INTEGRATED CIRCUITS DIVISION OMA160 Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating OMA160 / OMA160S MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time OMA160 / OMA160S 250C for 30 seconds Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb R11 e3 www.ixysic.com 5 INTEGRATED CIRCUITS DIVISION OMA160 Mechanical Dimensions OMA160 8.382 0.381 (0.330 0.015) PCB Hole Pattern 7.239 TYP (0.285 TYP) 2.54 0.127 (0.100 0.005) 6 - 0.800 DIA. (6 - 0.031 DIA.) 9.144 0.508 (0.360 0.020) 6.350 0.127 (0.250 0.005) 2.540 0.127 (0.100 0.005) 7.620 0.127 (0.300 0.005) Pin 1 7.620 0.254 (0.300 0.010) 1.651 0.254 (0.065 0.010) 3.302 0.051 (0.130 0.002) 0.254 0.0127 (0.010 0.0005) 6.350 0.127 (0.250 0.005) 5.080 0.127 (0.200 0.005) 4.064 TYP (0.160 TYP) Dimensions mm (inches) 0.457 0.076 (0.018 0.003) OMA160S 8.382 0.381 (0.330 0.015) 9.524 0.508 (0.375 0.020) Pin 1 0.635 0.127 (0.025 0.005) PCB Land Pattern 2.54 0.127 (0.100 0.005) 2.54 (0.10) 6.350 0.127 (0.250 0.005) 0.457 0.076 (0.018 0.003) 1.651 0.254 (0.065 0.010) 7.620 0.254 (0.300 0.010) 0.254 0.0127 (0.010 0.0005) 8.90 (0.3503) 1.65 (0.0649) 0.65 (0.0255) 3.302 0.051 (0.130 0.002) 4.445 0.254 (0.175 0.010) Dimensions mm (inches) 1.651 0.254 (0.065 0.010) 6 www.ixysic.com R11 INTEGRATED CIRCUITS DIVISION OMA160 OMA160STR Tape & Reel 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=16.00 (0.63) B0 = 10.10 (0.398) K0 = 4.90 (0.19) K1 = 3.80 (0.15) P = 12.00 (0.472) User Direction of Feed Embossed Carrier Embossment A0 = 10.10 (0.398) Dimensions mm (inches) NOTES: 1. All dimensions carry tolerances of EIA Standard 481-2 2. The tape complies with all "Notes" for constant dimensions listed on page 5 of EIA-481-2 For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division's Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. 7 Specification: DS-OMA160-R11 (c)Copyright 2012, IXYS Integrated Circuits Division All rights reserved. Printed in USA. 12/22/2012 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: IXYS: OMA160S OMA160STR OMA160