ST230CPbF Series Vishay High Power Products Phase Control Thyristors (Hockey PUK Version), 410 A FEATURES * Center amplifying gate * Metal case with ceramic insulator * International standard case TO-200AB (A-PUK) RoHS COMPLIANT * Lead (Pb)-free TO-200AB (A-PUK) * Designed and qualified for industrial level TYPICAL APPLICATIONS * DC motor controls PRODUCT SUMMARY IT(AV) 410 A * Controlled DC power supplies * AC controllers MAJOR RATINGS AND CHARACTERISTICS PARAMETER TEST CONDITIONS IT(AV) Ths IT(RMS) Ths ITSM I2 t A 55 C 780 A 25 C 5700 60 Hz 5970 50 Hz 163 60 Hz 149 Typical TJ UNITS 410 50 Hz VDRM/VRRM tq VALUES A kA2s 400 to 2000 V 100 s - 40 to 125 C ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER VOLTAGE CODE VDRM/VRRM, MAXIMUM REPETITIVE PEAK AND OFF-STATE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK VOLTAGE V 04 400 500 08 800 900 12 1200 1300 14 1400 1500 16 1600 1700 18 1800 1900 20 2000 2100 ST230C..C Document Number: 94398 Revision: 11-Aug-08 For technical questions, contact: ind-modules@vishay.com IDRM/IRRM MAXIMUM AT TJ = TJ MAXIMUM mA 30 www.vishay.com 1 ST230CPbF Series Phase Control Thyristors (Hockey PUK Version), 410 A Vishay High Power Products ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Maximum average on-state current at heatsink temperature IT(AV) Maximum RMS on-state current IT(RMS) Maximum peak, one-cycle non-repetitive surge current ITSM TEST CONDITIONS 180 conduction, half sine wave double side (single side) cooled I2t 55 (85) C t = 10 ms 5700 t = 8.3 ms t = 10 ms t = 8.3 ms t = 10 ms t = 8.3 ms Maximum I2t for fusing A 780 t = 10 ms I2 t UNITS DC at 25 C heatsink temperature double side cooled t = 8.3 ms Maximum I2t for fusing VALUES 410 (165) No voltage reapplied 100 % VRRM reapplied No voltage reapplied 5970 Sinusoidal half wave, initial TJ = TJ maximum 5000 163 148 115 100 % VRRM reapplied 1630 Low level value of threshold voltage VT(TO)1 (16.7 % x x IT(AV) < I < x IT(AV)), TJ = TJ maximum 0.92 VT(TO)2 (I > x IT(AV)), TJ = TJ maximum 0.98 Low level value of on-state slope resistance rt1 (16.7 % x x IT(AV) < I < x IT(AV)), TJ = TJ maximum 0.88 High level value of on-state slope resistance rt2 (I > x IT(AV)), TJ = TJ maximum 0.81 Ipk = 880 A, TJ = TJ maximum, tp = 10 ms sine pulse 1.69 VTM Maximum holding current IH Maximum (typical) latching current IL kA2s 105 t = 0.1 to 10 ms, no voltage reapplied High level value of threshold voltage Maximum on-state voltage A 4800 600 TJ = 25 C, anode supply 12 V resistive load 1000 (300) kA2s V m V mA SWITCHING PARAMETER Maximum non-repetitive rate of rise of turned-on current SYMBOL dI/dt TEST CONDITIONS Gate drive 20 V, 20 , tr 1 s TJ = TJ maximum, anode voltage 80 % VDRM VALUES UNITS 1000 A/s Typical delay time td Gate current 1 A, dIg/dt = 1 A/s Vd = 0.67 % VDRM, TJ = 25 C 1.0 Typical turn-off time tq ITM = 300 A, TJ = TJ maximum, dI/dt = 20 A/s, VR = 50 V, dV/dt = 20 V/s, gate 0 V 100 , tp = 500 s 100 SYMBOL TEST CONDITIONS VALUES UNITS s BLOCKING PARAMETER Maximum critical rate of rise of off-state voltage dV/dt TJ = TJ maximum linear to 80 % rated VDRM 500 V/s Maximum peak reverse and off-state leakage current IRRM, IDRM TJ = TJ maximum, rated VDRM/VRRM applied 30 mA www.vishay.com 2 For technical questions, contact: ind-modules@vishay.com Document Number: 94398 Revision: 11-Aug-08 ST230CPbF Series Phase Control Thyristors Vishay High Power Products (Hockey PUK Version), 410 A TRIGGERING PARAMETER SYMBOL Maximum peak gate power PGM Maximum average gate power PG(AV) Maximum peak positive gate current IGM Maximum peak positive gate voltage + VGM Maximum peak negative gate voltage - VGM VALUES TEST CONDITIONS TYP. TJ = TJ maximum, tp 5 ms 10.0 TJ = TJ maximum, f = 50 Hz, d% = 50 2.0 TJ = TJ maximum, tp 5 ms 3.0 IGT TJ = 25 C TJ = - 40 C DC gate voltage required to trigger VGT TJ = 25 C TJ = 125 C DC gate current not to trigger IGD TJ = TJ maximum DC gate voltage not to trigger VGD A V 5.0 Maximum required gate trigger/ current/voltage are the lowest value which will trigger all units 12 V anode to cathode applied TJ = 125 C Maximum gate current/voltage not to trigger is the maximum value which will not trigger any unit with rated VDRM anode to cathode applied UNITS W 20 TJ = TJ maximum, tp 5 ms TJ = - 40 C DC gate current required to trigger MAX. 180 - 90 150 40 - 2.9 - 1.8 3.0 1.2 - mA V 10 mA 0.25 V VALUES UNITS THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum operating temperature range Maximum storage temperature range Maximum thermal resistance, junction to heatsink - 40 to 125 TStg - 40 to 150 RthJ-hs Maximum thermal resistance, case to heatsink TEST CONDITIONS TJ RthC-hs DC operation single side cooled 0.17 DC operation double side cooled 0.08 DC operation single side cooled 0.033 DC operation double side cooled 0.017 Mounting force, 10 % Approximate weight Case style See dimensions - link at the end of datasheet C K/W 4900 (500) N (kg) 50 g TO-200AB (A-PUK) RthJC CONDUCTION CONDUCTION ANGLE SINUSOIDAL CONDUCTION SINGLE SIDE DOUBLE SIDE RECTANGULAR CONDUCTION SINGLE SIDE DOUBLE SIDE 180 0.015 0.017 0.011 0.011 120 0.018 0.019 0.019 0.019 90 0.024 0.024 0.026 0.026 60 0.035 0.035 0.036 0.036 30 0.060 0.060 0.060 0.061 TEST CONDITIONS UNITS TJ = TJ maximum K/W Note * The table above shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC Document Number: 94398 Revision: 11-Aug-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 3 ST230CPbF Series Maximum Allowable Heatsink Temperature (C) 130 ST230C..C Series (Single Side Cooled) R thJ-hs (DC) = 0.17 K/W 120 110 100 90 Conduction Angle 80 30 70 60 90 60 120 180 50 40 0 40 80 120 160 200 240 280 320 Average On-state Current (A) Maximum Allowable Heatsink Temperature (C) Phase Control Thyristors (Hockey PUK Version), 410 A Vishay High Power Products 130 ST230C..C Series (Double Side Cooled) R thJ-hs (DC) = 0.08 K/W 120 110 100 90 Conduction Period 80 70 30 60 60 90 50 120 40 180 30 DC 20 0 100 200 300 400 500 600 700 800 Average On-state Current (A) 130 ST230C..C Series (Single Side Cooled) R thJ-hs (DC) = 0.17 K/W 120 110 100 90 80 Conduction Period 70 60 30 50 60 90 40 30 120 180 DC 20 0 100 200 300 400 500 Average On-state Current (A) Fig. 4 - Current Ratings Characteristics Maximum Allowable Heatsink Temperature (C) Maximum Allowable Heatsink Temperature (C) Fig. 1 - Current Ratings Characteristics 130 ST230C..C Series (Double Side Cooled) R thJ-hs (DC) = 0.08 K/W 120 110 100 90 80 Conduction Angle 70 30 60 60 90 50 120 40 180 30 20 0 100 200 300 400 500 600 Average On-state Current (A) Fig. 3 - Current Ratings Characteristics www.vishay.com 4 180 120 90 60 30 1000 900 800 700 600 RMS Limit 500 400 Conduction Angle 300 ST230C..C Series T J = 125C 200 100 0 0 100 200 300 400 500 600 Average On-state Current (A) Fig. 5 - On-State Power Loss Characteristics Maximum Allowable Heatsink Temperature (C) Maximum Allowable Heatsink Temperature (C) Fig. 2 - Current Ratings Characteristics 1100 1400 DC 180 120 90 60 30 1200 1000 800 RMS Limit 600 Conduction Period 400 ST230C..C Series T J = 125C 200 0 0 200 400 600 800 1000 Average On-state Current (A) Fig. 6 - On-State Power Loss Characteristics For technical questions, contact: ind-modules@vishay.com Document Number: 94398 Revision: 11-Aug-08 ST230CPbF Series 5500 5000 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge. Initial Tj = 125C 4500 @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s Peak Half Sine Wave On-state Current (A) Peak Half Sine Wave On-state Current (A) Phase Control Thyristors Vishay High Power Products (Hockey PUK Version), 410 A 4000 3500 3000 2500 ST230C..C Series 2000 1 10 100 6500 6000 5500 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained. Initial Tj = 125C No Voltage Reapplied Rated Vrrm Reapplied 5000 4500 4000 3500 3000 2500 ST230C..C Series 2000 0.01 0.1 1 Pulse Train Duration (s) Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 7 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled Fig. 8 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled Instantaneous On-state Current (A) 10000 Tj = 25C Tj = 125C 1000 ST230C..C Series 100 0.5 1 1.5 2 2.5 3 3.5 4 4.5 Instantaneous On-state Voltage (V) Transient Thermal Impedance Z thJ-hs (K/W) Fig. 9 - On-State Voltage Drop Characteristics 1 Steady State Value R thJ-hs = 0.17 K/W (Single Side Cooled) 0.1 R thJ-hs = 0.08 K/W (Double Side Cooled) (DC Operation) 0.01 0.001 0.001 ST230C..C Series 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 10 - Thermal Impedance ZthJ-hs Characteristics Document Number: 94398 Revision: 11-Aug-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 5 ST230CPbF Series Phase Control Thyristors (Hockey PUK Version), 410 A Vishay High Power Products 10 (1) PGM = 10W, (2) PGM = 20W, (3) PGM = 40W, (4) PGM = 60W, Rectangular gate pulse a) Recommended load line for rated di/dt : 20V, 10ohms; tr<=1 s b) Recommended load line for <=30% rated di/dt : 10V, 10ohms tr<=1 s tp = 4ms tp = 2ms tp = 1ms tp = 0.66ms (a) (b) VGD IGD Tj=-40 C 1 0.1 0.001 Tj=25 C Tj=125 C Instantaneous Gate Voltage (V) 100 (1) Frequency Limited by PG(AV) Device: ST230C..C Series 0.01 0.1 (2) (3) (4) 1 10 100 Instantaneous Gate Current (A) Fig. 11 - Gate Characteristics ORDERING INFORMATION TABLE Device code ST 23 0 C 20 C 1 1 2 3 4 5 6 7 1 - Thyristor 2 - Essential part number 3 - 0 = Converter grade PbF 8 9 4 - C = Ceramic PUK 5 - Voltage code x 100 = VRRM (see Voltage Ratings table) 6 - C = PUK case TO-200AB (A-PUK) 7 - 0 = Eyelet terminals (gate and auxiliary cathode unsoldered leads) 1 = Fast-on terminals (gate and auxiliary cathode unsoldered leads) 2 = Eyelet terminals (gate and auxiliary cathode soldered leads) 3 = Fast-on terminals (gate and auxiliary cathode soldered leads) 8 - Critical dV/dt: None = 500 V/s (Standard selection) L = 1000 V/s (Special selection) 9 - Lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com 6 http://www.vishay.com/doc?95074 For technical questions, contact: ind-modules@vishay.com Document Number: 94398 Revision: 11-Aug-08 Outline Dimensions Vishay Semiconductors TO-200AB (A-PUK) DIMENSIONS in millimeters (inches) Anode to gate Creepage distance: 7.62 (0.30) minimum Strike distance: 7.12 (0.28) minimum 19 (0.75) DIA. MAX. 0.3 (0.01) MIN. 13.7/14.4 (0.54/0.57) 0.3 (0.01) MIN. Gate terminal for 1.47 (0.06) DIA. pin receptacle 19 (0.75) DIA. MAX. 38 (1.50) DIA MAX. 2 holes 3.56 (0.14) x 1.83 (0.07) minimum deep 6.5 (0.26) 4.75 (0.19) 25 5 42 (1.65) MAX. 28 (1.10) Quote between upper and lower pole pieces has to be considered after application of mounting force (see thermal and mechanical specification) Document Number: 95074 Revision: 01-Aug-07 For technical questions, contact: indmodules@vishay.com www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000