Sil-Pad 1200 (R) Exceptional Performance,Thermally Conductive Elastomeric Material Features and Benefits o * Thermal Impedance: 0.53 C-in /W (@ 50 psi) 2 * Exceptional thermal performance at lower application pressures TYPICAL PROPERTIES OF SIL-PAD 1200 PROPERTY Color IMPERIAL VALUE Black METRIC VALUE Black TEST METHOD Visual Reinforcement Carrier Fiberglass Fiberglass -- Thickness (inch) / (mm) 0.009 to 0.016 0.229 to 0.406 ASTM D374 Hardness Bulk Rubber (Shore 00) 80 80 ASTM D2240 * Smooth and non-tacky on both sides for easy re-positioning, ease of use and assembly error reduction Elongation (% - 45 to warp and fill) 20 20 ASTM D412 1300 9 ASTM D412 -76 to 356 -60 to 180 -- * Superior breakdown voltage and surface "wet out" values ELECTRICAL Dielectric Breakdown Voltage (Vac) 6000 6000 ASTM D149 * Designed for applications where electrical isolation is critical * Excellent cut-thru resistance, designed for screw and clip mounted applications Tensile Strength (psi) / (MPa) Continuous Use Temp (F) / (C) Dielectric Constant (1000 Hz) 8.0 8.0 ASTM D150 Volume Resistivity (Ohm-meter) 109 109 ASTM D257 Flame Rating V-O V-O U.L. 94 THERMAL Thermal Conductivity (W/m-K) (1) 1.8 1.8 ASTM D5470 THERMAL PERFORMANCE VS PRESSURE Pressure (psi) TO-220 Thermal Performance (C/W) 10 2.82 25 2.64 50 2.41 100 2.13 200 1.90 Thermal Impedance (C-in2/W) (2) 0.71 0.62 0.53 0.47 0.41 1)This is the measured thermal conductivity of the Sil-Pad Compound. 2) The ASTM D5470 test fixture was used.The recorded value includes interfacial thermal resistance.These values are provided for reference only. Actual application performance is directly related to the surface roughness, flatness and pressure applied. RoHS Compliant Typical Applications Include: Sil-Pad 1200 is a silicone based, fiberglassreinforced thermal interface material featuring a smooth, highly compliant surface.The material features a non-tacky surface for efficient re-positioning and ease of use, as well as an optional adhesive coating. Sil-Pad 1200 exhibits exceptional thermal performance at low and high application pressures.The material is ideal for placement between electronic power devices and a heatsink for screw and clip mounted applications. * Automotive electronics control modules * Motor controls * Discrete devices * Power supplies * Audio amplifiers * Telecommunications Configurations Available: * Sheet form, slit-to-width roll form * Adhesive coating * 9, 12 and 16 mil thicknesses * Die-cut parts We produce thousands of specials and customs. Tooling charges vary depending on tolerances and complexity of the part. Building a Part Number SP1200 0.009 Standard Options AC ___ = Standard configuration dash number, 1212 = 12" x 12" sheets, 12/250 = 12" x 250' rolls or 00 = custom configuration AC = Adhesive, one side 00 = No adhesive Standard thicknesses available: 0.009", 0.012", 0.016" SP1200 = Sil-Pad 1200 Material Sil-Pad (R): U.S. Patents 4,574,879; 4,602,125; 4,602,678; 4,685,987; 4,842,911 and others www.bergquistcompany.com The Bergquist Company North American Headquarters 18930 West 78th Street Chanhassen, MN 55317 Phone: 800-347-4572 Fax: 952-835-0430 The Bergquist Company European Headquarters Bramenberg 9a, 3755 BT Eemnes Netherlands Phone: 31-35-5380684 Fax: 31-35-5380295 The Bergquist Company - Asia Room 15, 8/F Wah Wai Industrial Centre No. 38-40, Au Pui Wan Street Fotan, Shatin, N.T. Hong Kong Ph: 852.2690.9296 Fax: 852.2690.2344 All statements, technical information and recommendations herein are based on tests we believe to be reliable, and THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MARKETABILITY AND FITNESS FOR PURPOSE. Sellers' and manufacturers' only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and the user assumes all risks and liability whatsoever in connection therewith. NEITHER SELLER NOR MANUFACTURER SHALL BE LIABLE EITHER IN TORT OR IN CONTRACT FOR ANY LOSS OR DAMAGE, DIRECT, INCIDENTAL, OR CONSEQUENTIAL, INCLUDING LOSS OF PROFITS OR REVENUE ARISING OUT OF THE USE OR THE INABILITY TO USE A PRODUCT. No statement, purchase order or recommendations by seller or purchaser not contained herein shall have any force or effect unless in an agreement signed by the officers of the seller and manufacturer. PDS_SP_1200_12.08 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Bergquist Company: SP1200-0.016-00-1212 SP1200-0.012-00-1212 SP1200-0.009-00-1212