1999 Apr 29 717
BC Components Maintenance type
AC and pulse
metallized polypropylene film capacitors MKP 379/380
MKP RADIAL POTTED TYPE PITCH 5/10/15/22.5/27.5 mm
Fig.1 Simplified outlines.
handbook, full pagewidth
CBA332
P = 5 mm P = 10 and 15 mmP = 7.5 mm P = 22.5 and 27.5 mm
FEATURES
•5 to 27.5 mm lead pitch
•Supplied loose in box, in ammopack and taped on reel.
DETAIL SPECIFICATION
For more detailed data and test requirements see
“Type
detail specification HQN-384-17/103”
.
APPLICATIONS
•Low losses due to low contact resistance and low loss
dielectric result in applications where high currents at
high frequency occur or high stability is preferred
•Their small dimensions make them suitable for circuits
with high packaging density.
QUICK REFERENCE DATA
Note
1. For pitch =5.0 mm: rated (AC) voltage =200 V and rated peak-to-peak voltage =560 Vp-p.
DESCRIPTION VALUE
Capacitance range (E24 series) 0.0015 to 6.2 µF
Capacitance tolerance ±5%; ±10%
For pitch ≤15 mm:
rated (DC) voltage 100 V; 160 V; 250 V; 400 V; 630 V
rated (AC) voltage 63 V; 100 V; 160 V; 200 V; 220 V; see note 1
rated peak-to-peak voltage 180 V; 280 V; 450 V; 560 V; 620 V; see note 1
For pitch >15 mm:
rated (DC) voltage 160 V; 250 V; 400 V; 630 V
rated (AC) voltage 100 V; 160 V; 200 V; 250 V
rated peak-to-peak voltage 280 V; 450 V; 560 V; 700 V
Climatic category 55/085/56
Rated temperature (DC) 85 °C
Rated temperature (AC) 70 °C
Maximum application temperature 85 °C
Reference specification IEC 60384-17
Performance grade grade 1 (long life)
Stability grade:
100 V, 160 V versions grade 2
250 V to 630 V versions pitch 5 to 15 mm grade 2
250 V to 630 V versions pitch 22.5 and 27.5 mm grade 1
1999 Apr 29 718
BC Components Maintenance type
AC and pulse
metallized polypropylene film capacitors MKP 380
COMPOSITION OF CATALOGUE NUMBER
2222 380 XX XX X
TYPE AND PITCHES
380 5.0 mm
MULTIPLIER
(nF)
0.1 2
13
10 4
CAPACITANCE
(numerically)
Example:
104 = 10 ×10 = 100 nF
TYPE PACKAGING LEAD CONFIGURATION C-TOL 100 V 160 V 250 V 400 V 630 V
380 ammopack H = 18.5 mm ±10% 25 35 45 55 65
±5% 26 36 46 56 66
loose in box lead length 4.0 +1.0/−0.5 mm ±10% 21 31 41 51 61
±5% 22 32 42 52 62
1999 Apr 29 719
BC Components Maintenance type
AC and pulse
metallized polypropylene film capacitors MKP 379
TYPE PACKAGING LEAD CONFIGURATION C-TOL 160 V 250 V 400 V 630 V
379 loose in box short leads ±5% 34 44 54 64
taped on reel H = 18.5 mm ±5% 35 45 55 65
2222 379 XX XX X
TYPE AND PITCHES
379
10.0 mm
15.0 mm
22.5 mm
27.5 mm
MULTIPLIER
(nF)
13
10 4
100 5
CAPACITANCE
(numerically)
Example:
104 =10 ×10 =100 nF
1999 Apr 29 720
BC Components Maintenance type
AC and pulse
metallized polypropylene film capacitors MKP 380
MKP 380 GENERAL DATA PITCH 5 mm
Specific reference data for the 100 V DC capacitors
Available 100 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
.
2. H = in-tape height; for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE
at 10 kHz at 100 kHz
Tangent of loss angle:
0.018 µF≤C≤0.027 µF≤5×10−4≤15 ×10−4
0.0027 µF<C≤0.075 µF≤5×10−4≤20 ×10−4
0.075 µF<C≤0.1 µF≤5×10−4≤25 ×10−4
Rated voltage pulse slope (dU/dt)R at 100 V (DC) 80 V/µs
R between leads for C ≤1.0 µF at 100 V; 1 minute >100000 MΩ
R between interconnected leads and case; 100 V; 1 minute >100000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 160 V; 1 minute
Withstanding (DC)voltage between leads and case 2840 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Ammopack H =18.5 mm; note 2 ±10% 2222 380 25... preferred
±5% 2222 380 26... on request
Loose in box lt=4.0 +1.0/−0.5 mm ±10% 2222 380 21... on request
±5% 2222 380 22... on request
Fig.4 Outline.
handbook, full pagewidth
P
h
lt
lb
∅dt
CBA112
1999 Apr 29 721
BC Components Maintenance type
AC and pulse
metallized polypropylene film capacitors MKP 380
URdc =100 V; URac =63 V/Up-p =180 V
Note
1. The shading indicates preferred types.
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER(1)
AMMOPACK
H=18.5 mm
C-tol =±10%
Pitch =5.0 ±0.3 mm; dt=0.50 ±0.05 mm
0.018
3.5 ×8.0 ×7.2 0.35
2222 380 25183
0.02 2222 380 25203
0.022 2222 380 25223
0.024 2222 380 25243
0.027 2222 380 25273
0.03 2222 380 25303
0.033 2222 380 25333
0.036
4.5 ×9.0 ×7.2 0.45
2222 380 25363
0.039 2222 380 25393
0.043 2222 380 25433
0.047 2222 380 25473
0.051
6.0 ×11.0 ×7.2 0.60
2222 380 25513
0.056 2222 380 25563
0.062 2222 380 25623
0.068 2222 380 25683
0.075 2222 380 25753
0.082 2222 380 25823
0.091 2222 380 25913
0.1 2222 380 25104
1999 Apr 29 722
BC Components Maintenance type
AC and pulse
metallized polypropylene film capacitors MKP 380
MKP 380 GENERAL DATA PITCH 5 mm
Specific reference data for the 160 V DC capacitors
Available 160 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
.
2. H = in-tape height; for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE
at 10 kHz at 100 kHz
Tangent of loss angle:
0.013 µF≤C≤0.027 µF≤5×10−4≤15 ×10−4
0.027 µF<C≤0.068 µF≤5×10−4≤20 ×10−4
Rated voltage pulse slope (dU/dt)R at 160 V (DC) 80 V/µs
R between leads for C ≤1.0 µF at 100 V; 1 minute >100000 MΩ
R between interconnected leads and case; 100 V; 1 minute >100000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 256 V; 1 minute
Withstanding (DC)voltage between leads and case 2840 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Ammopack H =18.5 mm; note 2 ±10% 2222 380 35... preferred
±5% 2222 380 36... on request
Loose in box lt=4.0 +1.0/−0.5 mm ±10% 2222 380 31... on request
±5% 2222 380 32... on request
Fig.5 Outline.
k
, full pagewidth
P
h
lt
lb
∅dt
CBA112
1999 Apr 29 723
BC Components Maintenance type
AC and pulse
metallized polypropylene film capacitors MKP 380
URdc =160 V; URac =100 V/Up-p =280 V
Note
1. The shading indicates preferred types.
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER(1)
AMMOPACK
H=18.5 mm
C-tol =±10%
Pitch =5.0 ±0.3 mm; dt=0.50 ±0.05 mm
0.013
3.5 ×8.0 ×7.2 0.35
2222 380 35133
0.015 2222 380 35153
0.016 2222 380 35163
0.018 2222 380 35183
0.02 2222 380 35203
0.022 2222 380 35223
0.024
4.5 ×9.0 ×7.2 0.45
2222 380 35243
0.027 2222 380 35273
0.03 2222 380 35303
0.033 2222 380 35333
0.036
6.0 ×11.0 ×7.2 0.60
2222 380 35363
0.039 2222 380 35393
0.043 2222 380 35433
0.047 2222 380 35473
0.051 2222 380 35513
0.056 2222 380 35563
0.062 2222 380 35623
0.068 2222 380 35683
1999 Apr 29 724
BC Components Maintenance type
AC and pulse
metallized polypropylene film capacitors MKP 380
MKP 380 GENERAL DATA PITCH 5 mm
Specific reference data for the 250 V DC capacitors
Available 250 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
.
2. H = in-tape height; for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE
at 10 kHz at 100 kHz
Tangent of loss angle:
0.0091 µF≤C≤0.027 µF≤5×10−4≤15 ×10−4
0.027 µF<C≤0.043 µF≤5×10−4≤20 ×10−4
Rated voltage pulse slope (dU/dt)R at 250 V (DC) 90 V/µs
R between leads for C ≤1.0 µF at 100 V; 1 minute >100000 MΩ
R between interconnected leads and case; 100 V; 1 minute >100000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 400 V; 1 minute
Withstanding (DC)voltage between leads and case 2840 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Ammopack H =18.5 mm; note 2 ±10% 2222 380 45... preferred
±5% 2222 380 46... on request
Loose in box lt=4.0 +1.0/−0.5 mm ±10% 2222 380 41... on request
±5% 2222 380 42... on request
Fig.6 Outline.
handbook, full pagewidth
P
h
lt
lb
∅dt
CBA112
1999 Apr 29 725
BC Components Maintenance type
AC and pulse
metallized polypropylene film capacitors MKP 380
URdc =250 V; URac =160 V/Up-p =450 V
Note
1. The shading indicates preferred types.
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER(1)
AMMOPACK
H=18.5 mm
C-tol =±10%
Pitch =5.0 ±0.3 mm; dt=0.50 ±0.05 mm
0.0091
3.5 ×8.0 ×7.2 0.35
2222 380 45912
0.01 2222 380 45103
0.011 2222 380 45113
0.012 2222 380 45123
0.013 2222 380 45133
0.015 2222 380 45153
0.016
4.5 ×9.0 ×7.2 0.45
2222 380 45163
0.018 2222 380 45183
0.02 2222 380 45203
0.022 2222 380 45223
0.024 2222 380 45243
0.027
6.0 ×11.0 ×7.2 0.60
2222 380 45273
0.03 2222 380 45303
0.033 2222 380 45333
0.036 2222 380 45363
0.039 2222 380 45393
0.043 2222 380 45433
1999 Apr 29 726
BC Components Maintenance type
AC and pulse
metallized polypropylene film capacitors MKP 380
MKP 380 GENERAL DATA PITCH 5 mm
Specific reference data for the 400 V DC capacitors
Available 400 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
.
2. H = in-tape height; for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE
at 10 kHz at 100 kHz
Tangent of loss angle:
0.0043 µF≤C≤0.0091 µF≤5×10−4≤10 ×10−4
0.0091 µF<C≤0.02 µF≤5×10−4≤15 ×10−4
Rated voltage pulse slope (dU/dt)R at 400 V (DC) 100 V/µs
R between leads for C ≤1.0 µF at 100 V; 1 minute >100000 MΩ
R between interconnected leads and case; 100 V; 1 minute >100000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 640 V; 1 minute
Withstanding (DC)voltage between leads and case 2840 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Ammopack H =18.5 mm; note 2 ±10% 2222 380 55... preferred
±5% 2222 380 56... on request
Loose in box lt=4.0 +1.0/−0.5 mm ±10% 2222 380 51... on request
±5% 2222 380 52... on request
Fig.7 Outline.
handbook, full pagewidth
P
h
lt
lb
∅dt
CBA112
1999 Apr 29 727
BC Components Maintenance type
AC and pulse
metallized polypropylene film capacitors MKP 380
URdc =400 V; URac =200 V/Up-p =560 V
Note
1. The shading indicates preferred types.
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER(1)
AMMOPACK
H=18.5 mm
C-tol =±10%
Pitch =5.0 ±0.3 mm; dt=0.50 ±0.05 mm
0.0043
3.5 ×8.0 ×7.2 0.35
2222 380 55432
0.0047 2222 380 55472
0.0051 2222 380 55512
0.0056 2222 380 55562
0.0062 2222 380 55622
0.0068 2222 380 55682
0.0075 2222 380 55752
0.0082 2222 380 55822
0.0091
4.5 ×9.0 ×7.2 0.45
2222 380 55912
0.01 2222 380 55103
0.011 2222 380 55113
0.012 2222 380 55123
0.013
6.0 ×11.0 ×7.2 0.60
2222 380 55133
0.015 2222 380 55153
0.016 2222 380 55163
0.018 2222 380 55183
0.02 2222 380 55203
1999 Apr 29 728
BC Components Maintenance type
AC and pulse
metallized polypropylene film capacitors MKP 380
MKP 380 GENERAL DATA PITCH 5 mm
Specific reference data for the 630 V DC capacitors
Available 630 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
.
2. H = in-tape height; for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE
at 10 kHz at 100 kHz
Tangent of loss angle:
0.0015 µF≤C≤0.0091 µF≤5×10−4≤10 ×10−4
Rated voltage pulse slope (dU/dt)R at 630 V (DC) 120 V/µs
R between leads for C ≤1.0 µF at 500 V; 1 minute >100000 MΩ
R between interconnected leads and case; 500 V; 1 minute >100000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 880 V; 1 minute
Withstanding (DC)voltage between leads and case 2840 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Ammopack H =18.5 mm; note 2 ±10% 2222 380 65... preferred
±5% 2222 380 66... on request
Loose in box lt=4.0 +1.0/−0.5 mm ±10% 2222 380 61... on request
±5% 2222 380 62... on request
Fig.8 Outline.
handbook, full pagewidth
P
h
lt
lb
∅dt
CBA112
1999 Apr 29 729
BC Components Maintenance type
AC and pulse
metallized polypropylene film capacitors MKP 380
URdc =630 V; URac =200 V/Up-p =560 V
Note
1. The shading indicates preferred types.
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER(1)
AMMOPACK
H=18.5 mm
C-tol =±10%
Pitch =5.0 ±0.3 mm; dt=0.50 ±0.05 mm
0.0015
3.5 ×8.0 ×7.2 0.35
2222 380 65152
0.0016 2222 380 65162
0.0018 2222 380 65182
0.002 2222 380 65202
0.0022 2222 380 65222
0.0024 2222 380 65242
0.0027 2222 380 65272
0.003 2222 380 65302
0.0033 2222 380 65332
0.0036 2222 380 65362
0.0039 2222 380 65392
0.0043
4.5 ×9.0 ×7.2 0.45
2222 380 65432
0.0047 2222 380 65472
0.0051 2222 380 65512
0.0056 2222 380 65562
0.0062
6.0 ×11.0 ×7.2 0.60
2222 380 65622
0.0068 2222 380 65682
0.0075 2222 380 65752
0.0082 2222 380 65822
0.0091 2222 380 65912
1999 Apr 29 730
BC Components Maintenance type
AC and pulse
metallized polypropylene film capacitors MKP 379
MKP 379 GENERAL DATA PITCH 10 mm
Specific reference data for the 160 V DC capacitors (pitch =10 mm)
Available 160 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
.
2. H = in-tape height for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE
at 10 kHz at 100 kHz
Tangent of loss angle:
C≤0.075 µF≤5×10−4≤20 ×10−4
0.075 µF<C≤0.11 µF≤5×10−4≤25 ×10−4
0.11 µF<C≤0.16 µF≤10 ×10−4≤30 ×10−4
Rated voltage pulse slope (dU/dt)R at 160 V (DC) 60 V/µs
R between leads for C ≤1.0 µF at 100 V; 1 minute >100000 MΩ
R between interconnected leads and case; 100 V; 1 minute >100000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 256 V; 1 minute
Withstanding (DC)voltage between leads and case 2840 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=4.0 +1/−0.5 mm ±5% 2222 379 34... preferred
Taped on reel H =18.5 mm; note 2 ±5% 2222 379 35... on request
Fig.9 Outline.
handbook, full pagewidth
lb
h
lt
∅dt
P
CBA115
1999 Apr 29 731
BC Components Maintenance type
AC and pulse
metallized polypropylene film capacitors MKP 379
URdc =160 V; URac =100 V/Up-p =280 V
Note
1. The shading indicates preferred types.
Available on request
Note
1. E24 series.
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER(1)
LOOSE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±5%
Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm
0.075
4.0 ×10.0 ×12.5 0.6
2222 379 34753
0.082 2222 379 34823
0.091 2222 379 34913
0.1 2222 379 34104
0.11
5.0 ×11.0 ×12.5 0.85
2222 379 34114
0.12 2222 379 34124
0.13 2222 379 34134
0.15 2222 379 34154
0.16 6.0 ×12.0 ×12.5 1.0 2222 379 34164
PITCH dtCAPACITANCE RANGE
(µF)(1)
URdc =160 V; URac =100 V/Up-p =280 V
7.5 ±0.4 mm 0.60 ±0.06 mm 0.022 to 0.12
1999 Apr 29 732
BC Components Maintenance type
AC and pulse
metallized polypropylene film capacitors MKP 379
MKP 379 GENERAL DATA PITCH 15/22.5/27.5 mm
Specific reference data for the 160 V DC capacitors (pitch >10 mm)
Available 160 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
; taped on reel pitch = 27.5 mm is not available.
2. H = in-tape height for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE DESCRIPTION VALUE
at 10 kHz at 100 kHz at 10 kHz at 100 kHz
Tangent of loss angle: Tangent of loss angle:
C≤0.18 µF≤10 ×10−4≤30 ×10−41.8 µF<C≤2.0 µF≤10 ×10−4≤95 ×10−4
0.18 µF<C≤0.3 µF≤10 ×10−4≤35 ×10−42.0 µF<C≤2.2 µF≤10 ×10−4≤100 ×10−4
0.3 µF<C≤0.39 µF≤10 ×10−4≤40 ×10−42.2 µF<C≤2.4 µF≤15 ×10−4≤105 ×10−4
0.39 µF<C≤0.56 µF≤10 ×10−4≤45 ×10−42.4 µF<C≤2.7 µF≤15 ×10−4≤110 ×10−4
0.56 µF<C≤0.68 µF≤10 ×10−4≤50 ×10−42.7 µF<C≤3.0 µF≤15 ×10−4≤115 ×10−4
0.68 µF<C≤0.82 µF≤10 ×10−4≤55 ×10−43.0 µF<C≤3.3 µF≤15 ×10−4≤125 ×10−4
0.82 µF<C≤0.91 µF≤10 ×10−4≤60 ×10−43.3 µF<C≤3.6 µF≤15 ×10−4≤130 ×10−4
0.91 µF<C≤1.0 µF≤10 ×10−4≤65 ×10−43.6 µF<C≤3.9 µF≤15 ×10−4≤135 ×10−4
1.0 µF<C≤1.2 µF≤10 ×10−4≤70 ×10−43.9 µF<C≤4.3 µF≤15 ×10−4≤145 ×10−4
1.2 µF<C≤1.3 µF≤10 ×10−4≤75 ×10−44.3 µF<C≤4.7 µF≤20 ×10−4≤155 ×10−4
1.3 µF<C≤1.5 µF≤10 ×10−4≤80 ×10−44.7 µF<C≤5.1 µF≤20 ×10−4≤160 ×10−4
1.5 µF<C≤1.6 µF≤10 ×10−4≤85 ×10−45.1 µF<C≤5.6 µF≤20 ×10−4≤175 ×10−4
1.6 µF<C≤1.8 µF≤10 ×10−4≤90 ×10−45.6 µF<C≤6.2 µF≤20 ×10−4≤185 ×10−4
Rated voltage pulse slope
(dU/dt)R at 160 V (DC): Rated voltage pulse slope
(dU/dt)R at 160 V (DC):
l=17.5 mm 50 V/µsl=31.0 mm 15 V/µs (b <15 mm)
l=26.0 mm 25 V/µsl=31.0 mm 7.5 V/µs (b ≥15 mm)
R between leads, for C ≤1µF at 100 V; 1 minute >100000 MΩ
RC between leads, for C >1µF at 100 V; 1 minute >100000 s
R between interconnected leads and case; 100 V; 1 minute >100000 MΩ
Withstanding (DC) voltage (cut off current 10 mA);
rise time 100 V/s 256 V; 1 minute
Withstanding (DC)voltage between leads and case 2840 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=3.5 ±0.3 mm ±5% 2222 379 34... preferred
Taped on reel H =18.5 mm; note 2 ±5% 2222 379 35... on request
Fig.10 Outline.
handbook, full pagewidth
lb
h
l
t
∅d
t
P
CBA115
1999 Apr 29 733
BC Components Maintenance type
AC and pulse
metallized polypropylene film capacitors MKP 379
URdc =160 V; URac =100 V/Up-p =280 V
Note
1. The shading indicates preferred types.
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER(1)
LOOSE IN BOX
lt=3.5 ±0.3 mm
C-tol =±5%
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm
0.18
5.0 ×11.0 ×17.5 1.2
2222 379 34184
0.2 2222 379 34204
0.22 2222 379 34224
0.24 2222 379 34244
0.27 2222 379 34274
0.3
6.0 ×12.0 ×17.5 1.4
2222 379 34304
0.33 2222 379 34334
0.36 2222 379 34364
0.39 2222 379 34394
0.43 7.0 ×13.5 ×17.5 1.9 2222 379 34434
0.47 2222 379 34474
0.51 2222 379 34514
0.56
8.5 ×15.0 ×17.5 2.6
2222 379 34564
0.62 2222 379 34624
0.68 2222 379 34684
0.75 2222 379 34754
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.82 7.0 ×16.5 ×26.0 3.2 2222 379 34824
0.91 2222 379 34914
1
8.5 ×18.0 ×26.0 4.4
2222 379 34105
1.1 2222 379 34115
1.2 2222 379 34125
1.3 2222 379 34135
1.5 10.0 ×19.5 ×26.0 5.5 2222 379 34155
1.6 2222 379 34165
1.8 2222 379 34185
Pitch =27.5 ±0.4 mm; dt=0.80 ±0.08 mm
211.0 ×21.0 ×31.0 7.8 2222 379 34205
2.2 2222 379 34225
2.4 2222 379 34245
2.7 13.0 ×23.0 ×31.0 10.4 2222 379 34275
3 2222 379 34305
3.3 2222 379 34335
3.6 15.0 ×25.0 ×31.0 12.8 2222 379 34365
3.9 2222 379 34395
4.3 2222 379 34435
4.7
18.0 ×28.0 ×31.0 17.2
2222 379 34475
5.1 2222 379 34515
5.6 2222 379 34565
6.2 2222 379 34625
1999 Apr 29 734
BC Components Maintenance type
AC and pulse
metallized polypropylene film capacitors MKP 379
MKP 379 GENERAL DATA PITCH 10 mm
Specific reference data for the 250 V DC capacitors (pitch =10 mm)
Available 250 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
.
2. H = in-tape height for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE
at 10 kHz at 100 kHz
Tangent of loss angle:
0.047 µF<C≤0.075 µF≤5×10−4≤20 ×10−4
0.075 µF<C≤0.091 µF≤5×10−4≤25 ×10−4
Rated voltage pulse slope (dU/dt)Rat 250 V (DC) 70 V/µs
R between leads for C ≤1.0 µF at 100 V; 1 minute >100000 MΩ
R between interconnected leads and case; 100 V; 1 minute >100000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 400 V; 1 minute
Withstanding (DC)voltage between leads and case 2840 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=4.0 +1/−0.5 mm ±5% 2222 379 44... preferred
Taped on reel H =18.5 mm; note 2 ±5% 2222 379 45... on request
Fig.11 Outline.
handbook, full pagewidth
lb
h
lt
∅dt
P
CBA115
1999 Apr 29 735
BC Components Maintenance type
AC and pulse
metallized polypropylene film capacitors MKP 379
URdc =250 V; URac =160 V/Up-p =450 V
Note
1. The shading indicates preferred types.
Available on request
Note
1. E24 series.
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER(1)
LOOSE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±5%
Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm
0.047
4.0 ×10.0 ×12.5 0.6
2222 379 44473
0.051 2222 379 44513
0.056 2222 379 44563
0.062 2222 379 44623
0.068 2222 379 44683
0.075 5.0 ×11.0 ×12.5 0.85 2222 379 44753
0.082 2222 379 44823
0.091 2222 379 44913
PITCH dtCAPACITANCE RANGE
(µF)(1)
URdc =250 V; URac =160 V/Up-p =450 V
7.5 ±0.4 mm 0.60 ±0.06 mm 0.012 to 0.082
1999 Apr 29 736
BC Components Maintenance type
AC and pulse
metallized polypropylene film capacitors MKP 379
MKP 379 GENERAL DATA PITCH 15/22.5/27.5 mm
Specific reference data for the 250 V DC capacitors (pitch >10 mm)
Available 250 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
; taped on reel pitch = 27.5 mm is not available.
2. H = in-tape height for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE DESCRIPTION VALUE
at 10 kHz at 100 kHz at 10 kHz at 100 kHz
Tangent of loss angle: Tangent of loss angle:
0.1 µF<C≤0.11 µF≤10 ×10−4≤25 ×10−41.3 µF<C≤1.5 µF≤10 ×10−4≤80 ×10−4
0.11 µF<C≤0.18 µF≤10 ×10−4≤30 ×10−41.5 µF<C≤1.6 µF≤10 ×10−4≤85 ×10−4
0.18 µF<C≤0.3 µF≤10 ×10−4≤35 ×10−41.6 µF<C≤1.8 µF≤10 ×10−4≤90 ×10−4
0.3 µF<C≤0.39 µF≤10 ×10−4≤40 ×10−41.8 µF<C≤2.0 µF≤10 ×10−4≤95 ×10−4
0.39 µF<C≤0.56 µF≤10 ×10−4≤40 ×10−42.0 µF<C≤2.2 µF≤10 ×10−4≤100 ×10−4
0.56 µF<C≤0.68 µF≤10 ×10−4≤50 ×10−42.2 µF<C≤2.4 µF≤15 ×10−4≤105 ×10−4
0.68 µF<C≤0.82 µF≤10 ×10−4≤55 ×10−42.4 µF<C≤2.7 µF≤15 ×10−4≤110 ×10−4
0.82 µF<C≤0.91 µF≤10 ×10−4≤60 ×10−42.7 µF<C≤3.0 µF≤15 ×10−4≤115 ×10−4
0.91 µF<C≤1.0 µF≤10 ×10−4≤65 ×10−43.0 µF<C≤3.3 µF≤15 ×10−4≤125 ×10−4
1.0 µF<C≤1.2 µF≤10 ×10−4≤70 ×10−43.3 µF<C≤3.6 µF≤15 ×10−4≤130 ×10−4
1.2 µF<C≤1.3 µF≤10 ×10−4≤75 ×10−43.6 µF<C≤3.9 µF≤15 ×10−4≤135 ×10−4
Rated voltage pulse slope
(dU/dt)R at 250 V (DC): Rated voltage pulse slope
(dU/dt)R at 250 V (DC):
l=17.5 mm 60 V/µsl=31.0 mm 20 V/µs (b <15 mm)
l=26.0 mm 30 V/µsl=31.0 mm 10 V/µs (b ≥15 mm)
R between leads, for C ≤1µF at 100 V; 1 minute >100000 MΩ
RC between leads, for C >1µF at 100 V; 1 minute >100000 s
R between interconnected leads and case; 100 V;
1 minute >100000 MΩ
Withstanding (DC) voltage (cut off current 10 mA);
rise time 100 V/s 400 V; 1 minute
Withstanding (DC)voltage between leads and case 2840 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=3.5 ±0.3 mm ±5% 2222 379 44... preferred
Taped on reel H =18.5 mm; note 2 ±5% 2222 379 45... on request
Fig.12 Outline.
handbook, full pagewidth
lb
h
l
t
∅d
t
P
CBA115
1999 Apr 29 737
BC Components Maintenance type
AC and pulse
metallized polypropylene film capacitors MKP 379
URdc =250 V; URac =160 V/Up-p =450 V
Note
1. The shading indicates preferred types.
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER(1)
LOOSE IN BOX
lt=3.5 ±0.3 mm
C-tol =±5%
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm
0.1
5.0 ×11.0 ×17.5 1.2
2222 379 44104
0.11 2222 379 44114
0.12 2222 379 44124
0.13 2222 379 44134
0.15 2222 379 44154
0.16 2222 379 44164
0.18
6.0 ×12.0 ×17.5 1.4
2222 379 44184
0.2 2222 379 44204
0.22 2222 379 44224
0.24 2222 379 44244
0.27 7.0 ×13.5 ×17.5 1.9 2222 379 44274
0.3 2222 379 44304
0.33 2222 379 44334
0.36
8.5 ×15.0 ×17.5 2.6
2222 379 44364
0.39 2222 379 44394
0.43 2222 379 44434
0.47 2222 379 44474
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.51 7.0 ×16.5 ×26.0 3.2 2222 379 44514
0.56 2222 379 44564
0.62 2222 379 44624
0.68
8.5 ×18.0 ×26.0 4.4
2222 379 44684
0.75 2222 379 44754
0.82 2222 379 44824
0.91 2222 379 44914
110.0 ×19.5 ×26.0 5.5 2222 379 44105
1.1 2222 379 44115
1.2 2222 379 44125
Pitch =27.5 ±0.4 mm; dt=0.80 ±0.08 mm
1.3 11.0 ×21.0 ×31.0 7.8 2222 379 44135
1.5 2222 379 44155
1.6 2222 379 44165
1.8 13.0 ×23.0 ×31.0 10.4 2222 379 44185
2 2222 379 44205
2.2 2222 379 44225
2.4 15.0 ×25.0 ×31.0 12.8 2222 379 44245
2.7 2222 379 44275
3
18.0 ×28.0 ×31.0 17.2
2222 379 44305
3.3 2222 379 44335
3.6 2222 379 44365
3.9 2222 379 44395
1999 Apr 29 738
BC Components Maintenance type
AC and pulse
metallized polypropylene film capacitors MKP 379
MKP 379 GENERAL DATA PITCH 10 mm
Specific reference data for the 400 V DC capacitors (pitch =10 mm)
Available 400 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
.
2. H = in-tape height for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE
at 10 kHz at 100 kHz
Tangent of loss angle:
0.0075 µF≤C≤0.0091 µF≤5×10−4≤10 ×10−4
0.0091 µF<C≤0.027 µF≤5×10−4≤15 ×10−4
0.027 µF<C≤0.043 µF≤5×10−4≤20 ×10−4
Rated voltage pulse slope (dU/dt)Rat 400 V (DC) 80 V/µs
R between leads for C ≤1.0 µF at 100 V; 1 minute >100000 MΩ
R between interconnected leads and case; 100 V; 1 minute >100000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 640 V; 1 minute
Withstanding (DC)voltage between leads and case 2840 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=4.0 +1/−0.5 mm ±5% 2222 379 54... preferred
Taped on reel H =18.5 mm; note 2 ±5% 2222 379 55... on request
Fig.13 Outline.
handbook, full pagewidth
lb
h
lt
∅dt
P
CBA115
1999 Apr 29 739
BC Components Maintenance type
AC and pulse
metallized polypropylene film capacitors MKP 379
URdc =400 V; URac =200 V/Up-p =560 V
Note
1. The shading indicates preferred types.
Available on request
Note
1. E24 series.
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER(1)
LOOSE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±5%
Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm
0.022
4.0 ×10.0 ×12.5 0.6
2222 379 54223
0.024 2222 379 54243
0.027 2222 379 54273
0.03 2222 379 54303
0.033 2222 379 54333
0.036 5.0 ×11.0 ×12.5 0.85 2222 379 54363
0.039 2222 379 54393
0.043 2222 379 54433
PITCH dtCAPACITANCE RANGE
(µF)(1)
URdc =400 V; URac =200 V/Up-p =560 V
7.5 ±0.4 mm 0.60 ±0.06 mm 0.0075 to 0.039
1999 Apr 29 740
BC Components Maintenance type
AC and pulse
metallized polypropylene film capacitors MKP 379
MKP 379 GENERAL DATA PITCH 15/22.5/27.5 mm
Specific reference data for the 400 V DC capacitors (pitch >10 mm)
Available 400 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
; taped on reel pitch = 27.5 mm is not available.
2. H = in-tape height for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE DESCRIPTION VALUE
at 10 kHz at 100 kHz at 10 kHz at 100 kHz
Tangent of loss angle: Tangent of loss angle:
0.047 µF≤C≤0.075 µF≤5×10−4≤20 ×10−40.82 µF<C≤0.91 µF≤10 ×10−4≤60 ×10−4
0.075 µF<C≤0.11 µF≤5×10−4≤25 ×10−40.91 µF<C≤1.0 µF≤10 ×10−4≤65 ×10−4
0.11 µF<C≤0.18 µF≤10 ×10−4≤30 ×10−41.0 µF<C≤1.2 µF≤10 ×10−4≤70 ×10−4
0.18 µF<C≤0.3 µF≤10 ×10−4≤35 ×10−41.2 µF<C≤1.3 µF≤10 ×10−4≤75 ×10−4
0.3 µF<C≤0.39 µF≤10 ×10−4≤40 ×10−41.3 µF<C≤1.5 µF≤10 ×10−4≤80 ×10−4
0.39 µF<C≤0.56 µF≤10 ×10−4≤45 ×10−41.5 µF<C≤1.6 µF≤10 ×10−4≤85 ×10−4
0.56 µF<C≤0.68 µF≤10 ×10−4≤50 ×10−41.6 µF<C≤1.8 µF≤10 ×10−4≤90 ×10−4
0.68 µF<C≤0.82 µF≤10 ×10−4≤55 ×10−41.8 µF<C≤2.0 µF≤10 ×10−4≤95 ×10−4
Rated voltage pulse slope
(dU/dt)R at 400 V (DC): Rated voltage pulse slope
(dU/dt)R at 400 V (DC):
l=17.5 mm 70 V/µsl=31.0 mm 25 V/µs (b <15 mm)
l=26.0 mm 35 V/µsl=31.0 mm 13 V/µs (b ≥15 mm)
R between leads, for C ≤1µF at 100 V; 1 minute >100000 MΩ
RC between leads, for C >1µF at 100 V; 1 minute >100000 s
R between interconnected leads and case; 100 V;
1 minute >100000 MΩ
Withstanding (DC) voltage (cut off current 10 mA);
rise time 100 V/s 640 V; 1 minute
Withstanding (DC)voltage between leads and case 2840 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=3.5 ±0.3 mm ±5% 2222 379 54... preferred
Taped on reel H =18.5 mm; note 2 ±5% 2222 379 55... on request
Fig.14 Outline.
handbook, full pagewidth
lb
h
l
t
∅d
t
P
CBA115
1999 Apr 29 741
BC Components Maintenance type
AC and pulse
metallized polypropylene film capacitors MKP 379
URdc =400 V; URac =200 V/Up-p =560 V
Note
1. The shading indicates preferred types.
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER(1)
LOOSE IN BOX
lt=3.5 ±0.3 mm
C-tol =±5%
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm
0.047
5.0 ×11.0 ×17.5 1.2
2222 379 54473
0.051 2222 379 54513
0.056 2222 379 54563
0.062 2222 379 54623
0.068 2222 379 54683
0.075 2222 379 54753
0.082 2222 379 54823
0.091
6.0 ×12.0 ×17.5 1.4
2222 379 54913
0.1 2222 379 54104
0.11 2222 379 54114
0.12 2222 379 54124
0.13 7.0 ×13.5 ×17.5 1.9 2222 379 54134
0.15 2222 379 54154
0.16 2222 379 54164
0.18 8.5 ×15.0 ×17.5 2.6 2222 379 54184
0.2 2222 379 54204
0.22 2222 379 54224
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.24 7.0 ×16.5 ×26.0 3.2 2222 379 54244
0.27 2222 379 54274
0.3 2222 379 54304
0.33
8.5 ×18.0 ×26.0 4.4
2222 379 54334
0.36 2222 379 54364
0.39 2222 379 54394
0.43 2222 379 54434
0.47 2222 379 54474
0.51 10.0 ×19.5 ×26.0 5.5 2222 379 54514
0.56 2222 379 54564
0.62 2222 379 54624
Pitch =27.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.68 11.0 ×21.0 ×31.0 7.8 2222 379 54684
0.75 2222 379 54754
0.82 2222 379 54824
0.91 13.0 ×23.0 ×31.0 10.4 2222 379 54914
1 2222 379 54105
1.1 2222 379 54115
1.2 15.0 ×25.0 ×31.0 12.8 2222 379 54125
1.3 2222 379 54135
1.5 2222 379 54155
1.6 18.0 ×28.0 ×31.0 17.2 2222 379 54165
1.8 2222 379 54185
2 2222 379 54205
1999 Apr 29 742
BC Components Maintenance type
AC and pulse
metallized polypropylene film capacitors MKP 379
MKP 379 GENERAL DATA PITCH 10 mm
Specific reference data for the 630 V DC capacitors (pitch =10 mm)
Available 630 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
.
2. H = in-tape height for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE
at 10 kHz at 100 kHz
Tangent of loss angle:
0.01 µF≤C≤0.024 µF≤5×10−4≤15 ×10−4
Rated voltage pulse slope (dU/dt)Rat 500 V (DC) 100 V/µs
R between leads for C ≤1.0 µF at 100 V; 1 minute >100000 MΩ
R between interconnected leads and case; 500 V; 1 minute >100000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 960 V; 1 minute
Withstanding (DC)voltage between leads and case 2840 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=4.0 +1/−0.5 mm ±5% 2222 379 64... preferred
Taped on reel H =18.5 mm; note 2 ±5% 2222 379 65... on request
Fig.15 Outline.
handbook, full pagewidth
lb
h
lt
∅dt
P
CBA115
1999 Apr 29 743
BC Components Maintenance type
AC and pulse
metallized polypropylene film capacitors MKP 379
URdc =630 V; URac =220 V/Up-p =620 V
Note
1. The shading indicates preferred types.
Available on request
Note
1. E24 series.
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER(1)
LOOSE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±5%
Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm
0.01
4.0 ×10.0 ×12.5 0.6
2222 379 64103
0.011 2222 379 64113
0.012 2222 379 64123
0.013 2222 379 64133
0.015 2222 379 64153
0.016 2222 379 64163
0.018
5.0 ×11.0 ×12.5 0.85
2222 379 64183
0.02 2222 379 64203
0.022 2222 379 64223
0.024 2222 379 64243
PITCH dtCAPACITANCE RANGE
(µF)(1)
URdc =630 V; URac =220 V/Up-p =620 V
7.5 ±0.4 mm 0.60 ±0.06 mm 0.0033 to 0.022
1999 Apr 29 744
BC Components Maintenance type
AC and pulse
metallized polypropylene film capacitors MKP 379
MKP 379 GENERAL DATA PITCH 15/22.5/27.5 mm
Specific reference data for the 630 V DC capacitors (pitch >10 mm)
Available 630 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
; taped on reel pitch = 27.5 mm is not available.
2. H = in-tape height for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE DESCRIPTION VALUE
at 10 kHz at 100 kHz at 10 kHz at 100 kHz
Tangent of loss angle: Tangent of loss angle:
C≤0.027 µF≤5×10−4≤15 ×10−40.3 µF<C≤0.39 µF≤10 ×10−4≤40 ×10−4
0.027 µF<C≤0.075 µF≤5×10−4≤20 ×10−40.39 µF<C≤0.56 µF≤10 ×10−4≤45 ×10−4
0.075 µF<C≤0.11 µF≤5×10−4≤25 ×10−40.56 µF<C≤0.68 µF≤10 ×10−4≤50 ×10−4
0.11 µF<C≤0.18 µF≤10 ×10−4≤30 ×10−40.68 µF<C≤0.82 µF≤10 ×10−4≤55 ×10−4
0.18 µF<C≤0.3 µF≤10 ×10−4≤35 ×10−40.82 µF<C≤1.0 µF≤10 ×10−4≤60 ×10−4
Rated voltage pulse slope
(dU/dt)R at 630 V (DC): Rated voltage pulse slope
(dU/dt)R at 630 V (DC):
l=17.5 mm 90 V/µsl=31.0 mm 30 V/µs (b <15 mm)
l=26.0 mm 45 V/µsl=31.0 mm 15 V/µs (b ≥15 mm)
R between leads, for C ≤1µF at 500 V; 1 minute >100000 MΩ
RC between leads, for C >1µF at 500 V; 1 minute >100000 s
R between interconnected leads and case; 100 V ; 1 minute >100000 MΩ
Withstanding (DC) voltage (cut off current 10 mA);
rise time 100 V/s 960 V; 1 minute
Withstanding (DC)voltage between leads and case 2840 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=3.5 ±0.3 mm ±5% 2222 379 64... preferred
Taped on reel H =18.5 mm; note 2 ±5% 2222 379 65... on request
Fig.16 Outline.
handbook, full pagewidth
lb
h
l
t
∅d
t
P
CBA115
1999 Apr 29 745
BC Components Maintenance type
AC and pulse
metallized polypropylene film capacitors MKP 379
URdc =630 V; URac =250 V/Up-p =700 V; see note 1
Notes
1. URac =220 V/Up-p =620 V for C ≤0.11 µF.
2. The shading indicates preferred types.
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER(2)
LOOSE IN BOX
lt=3.5 ±0.3 mm
C-tol =±5%
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm
0.027
5.0 ×11.0 ×17.5 1.2
2222 379 64273
0.03 2222 379 64303
0.033 2222 379 64333
0.036 2222 379 64363
0.039 2222 379 64393
0.043
6.0 ×12.0 ×17.5 1.4
2222 379 64433
0.047 2222 379 64473
0.051 2222 379 64513
0.056 2222 379 64563
0.062 2222 379 64623
0.068 7.0 ×13.5 ×17.5 1.9 2222 379 64683
0.075 2222 379 64753
0.082 2222 379 64823
0.091 8.5 ×15.0 ×17.5 2.6 2222 379 64913
0.1 2222 379 64104
0.11 2222 379 64114
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.12
7.0 ×16.5 ×26.0 3.2
2222 379 64124
0.13 2222 379 64134
0.15 2222 379 64154
0.16 2222 379 64164
0.18 8.5 ×18.0 ×26.0 4.4 2222 379 64184
0.2 2222 379 64204
0.22 2222 379 64224
0.24 10.0 ×19.5 ×26.0 5.5 2222 379 64244
0.27 2222 379 64274
0.3 2222 379 64304
Pitch =27.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.33
11.0 ×21.0 ×31.0 7.8
2222 379 64334
0.36 2222 379 64364
0.39 2222 379 64394
0.43 2222 379 64434
0.47 13.0 ×23.0 ×31.0 10.4 2222 379 64474
0.51 2222 379 64514
0.56 2222 379 64564
0.62 15.0 ×25.0 ×31.0 12.8 2222 379 64624
0.68 2222 379 64684
0.75 2222 379 64754
0.82 18.0 ×28.0 ×31.0 17.2 2222 379 64824
0.91 2222 379 64914
1 2222 379 64105
