Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor's system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Revised April 2005 74VHC245 Octal Bidirectional Transceiver with 3-STATE Outputs General Description Features The VHC245 is an advanced high speed CMOS octal bus transceiver fabricated with silicon gate CMOS technology. It achieves high speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS low power dissipation. The VHC245 is intended for bidirectional asynchronous communication between data busses. The direction of data transmission is determined by the level of the T/R input. The enable input can be used to disable the device so that the busses are effectively isolated. All inputs are equipped with protection circuits against static discharge. High Speed: tPD 4.0 ns (typ) at VCC High Noise Immunity: VNIH VNIL 5V 28% VCC (Min) Power Down Protection is provided on all inputs Low Noise: VOLP 0.9V (typ) Low Power Dissipation: ICC 4 PA (Max) @ TA 25qC Pin and Function Compatible with 74HC245 Ordering Code: Order Number Package Number 74VHC245M 74VHC245SJ 74VHC245MTC 74VHC245N Package Description M20B 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide M20D Pb-Free 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide MTC20 N20A 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Surface mount packages are also available on Tape and Reel. Specify by appending the suffix letter "X" to the ordering code. Pb-Free package per JEDEC J-STD-020B. Logic Symbol Connection Diagram IEEE/IEC Truth Table Pin Description Pin Inputs Description OE Names OE Output Enable Input T/R Transmit/Receive Input A0-A7 Side A Inputs or 3-STATE Outputs B0-B7 Side B Inputs or 3-STATE Outputs (c) 2005 Fairchild Semiconductor Corporation DS011520 Outputs T/R L L Bus B Data to Bus A L H Bus A Data to Bus B H X HIGH-Z State H HIGH Voltage Level L LOW Voltage Level X Immaterial Any unused bus terminals during HIGH-Z State must be held HIGH or LOW. www.fairchildsemi.com 74VHC245 Octal Bidirectional Transceiver with 3-STATE Outputs November 1992 74VHC245 Absolute Maximum Ratings(Note 1) Recommended Operating Conditions (Note 2) 0.5V to 7.0V 0.5V to 7.0V 0.5V to VCC 0.5V 20 mA r20 mA r25 mA r75 mA 65qC to 150qC Supply Voltage (VCC) DC Input Voltage (VIN) (T/R, OE) DC Output Voltage (VOUT) Input Diode Current (IIK) (T/R, OE) Output Diode Current (IOK) DC Output Current (IOUT ) DC VCC/GND Current (ICC) Storage Temperature (TSTG) Supply Voltage (VCC) 0V to 5.5V Output Voltage (VOUT) 0V to VCC 40qC to 85qC Operating Temperature (TOPR) Input Rise and Fall Time (tr, tf) Lead Temperature (TL) VCC 3.3V r 0.3V 0 a 100 ns/V VCC 5.0V r 0.5V 0 a 20 ns/V Note 1: Absolute Maximum Ratings are values beyond which the device may be damaged or have its useful life impaired. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation outside databook specifications. 260qC (Soldering, 10 seconds) 2.0V to 5.5V Input Voltage (VIN)(T/R, OE) Note 2: Unused inputs or I/O pins must be held HIGH or LOW. They may not float. DC Electrical Characteristics Symbol VIH Parameter HIGH Level Input Voltage VIL LOW Level Input Voltage VOH VOL IOZ TA VCC (V) Min 25qC Typ TA Max 40qC to 85qC Min 2.0 1.50 1.50 3.0 5.5 0.7 VCC 0.7 VCC Max 2.0 0.50 0.50 0.3 VCC 0.3 VCC HIGH Level 2.0 1.9 2.0 1.9 3.0 2.9 3.0 2.9 4.5 4.4 4.5 3.0 2.58 2.48 4.5 3.94 3.80 V VIN V VIH IOH IOH V 2.0 0.0 0.1 Output Voltage 3.0 0.0 0.1 0.1 4.5 0.0 0.1 0.1 3.0 0.36 0.44 4.5 0.36 0.44 0.1 IOH VIN V VIH IOL VIN r0.25 5.5 r2.5 PA (T/R, OE) Current ICC Quiescent Supply Current www.fairchildsemi.com 8 mA 50 PA IOL 4 mA IOL 8 mA VCC or GND VCC or GND VOUT VIN OE Input Leakage 4 mA or VIL V 3-STATE Output IIN 50 PA or VIL 4.4 LOW Level Off-State Current Conditions V 3.0 5.5 Output Voltage Units VIH or VIL 0 5.5 r0.1 r1.0 PA VIN 5.5V or GND 5.5 4.0 40.0 PA VIN VCC or GND 2 74VHC245 Noise Characteristics Symbol VOLP Quiet Output Maximum (Note 3) Dynamic VOL VOLV Quiet Output Minimum (Note 3) VIHD (Note 3) VILD (Note 3) VCC Parameter TA 25qC Units Conditions (V) Typ Limits 5.0 0.9 1.2 V CL 50 pF 5.0 0.9 1.2 V CL 50 pF 5.0 3.5 V CL 50 pF 5.0 1.5 V CL 50 pF Dynamic VOL Minimum HIGH Level Dynamic Input Voltage Maximum LOW Level Dynamic Input Voltage Note 3: Parameter guaranteed by design. AC Electrical Characteristics Symbol VCC Parameter tPLH Propagation Delay tPHL Time (V) 3.3 r 0.3 5.0 r 0.5 tPZL 3-STATE Output tPZH Enable Time 3.3 r 0.3 5.0 r 0.5 25qC TA Min Typ TA Max 40qC to 85qC Min Max 5.8 8.4 1.0 10.0 8.3 11.9 1.0 13.5 4.0 5.5 1.0 6.5 5.5 7.5 1.0 8.5 8.5 13.2 1.0 15.5 11.0 16.7 1.0 19.0 5.8 8.5 1.0 10.0 7.3 10.6 1.0 12.0 tPLZ 3-STATE Output 3.3 r 0.3 11.5 15.8 1.0 18.0 tPHZ Disable Time 5.0 r 0.5 7.0 9.7 1.0 11.0 tOSLH Output to Output 3.3 r 0.3 1.5 1.5 tOSHL Skew 5.0 r 0.5 1.0 1.0 CIN Input Capacitance 10 10 4 Units Conditions ns ns ns RL 1 k: ns 1 k: CL 15 pF CL 50 pF CL 15 pF CL 50 pF CL 15 pF CL 50 pF CL 15 pF CL 50 pF CL 50 pF CL 50 pF CL 50 pF CL 50 pF ns RL ns (Note 4) pF VCC Open 5.0V (T/R, OE) CI/O Output Capacitance 8 pF VCC CPD Power Dissipation 21 pF (Note 5) Capacitance Note 4: Parameter guaranteed by design. tOSLH |tPLH max tPLH min|; t OSHL |tPHL max tPHL min| Note 5: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr.) CPD * VCC * fIN I CC/8 (per Bit). 3 www.fairchildsemi.com 74VHC245 Physical Dimensions inches (millimeters) unless otherwise noted 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide Package Number M20B www.fairchildsemi.com 4 74VHC245 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Pb-Free 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M20D 5 www.fairchildsemi.com 74VHC245 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC20 www.fairchildsemi.com 6 74VHC245 Octal Bidirectional Transceiver with 3-STATE Outputs Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N20A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 7 www.fairchildsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com