SPEC NO: DSAD0982 REV NO: V.2 DATE: MAR/10/2005 PAGE: 1 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.CHENG ERP: 1203000393
Package Dimensions
AP3216SEC SUPER BRIGHT ORANGE
Description
The Super Bright Orange device is made with DH
InGaAlP (on GaAs substrate) light emitting diode chip.
3.2x1.6mm SMD CHIP LED LAMP
Features
3.2mmx1.6mm SMT LED, 1.1mm THICKNESS.
LOW POWER CONSUMPTION.
WIDE VIEWING ANGLE.
IDEAL FOR BACKLIGHT AND INDICATOR.
VARIOUS COLORS AND LENS TYPES AVAILABLE.
PACKAGE : 2000PCS / REEL.
RoHS COMPLIANT.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. Specifications are subject to change without notice.
SPEC NO: DSAD0982 REV NO: V.2 DATE: MAR/10/2005 PAGE: 2 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.CHENG ERP: 1203000393
Selection Guide
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Electrical / Optical Characteristics at TA=25°C
Absolute Maximum Ratings at TA=25°C
Part No. Dice Lens Type Iv (mcd)
@ 20mA
Viewing
Angle
Min. Typ. 2 θ
θ θ
θ 1/2
AP3216SEC SUPER BRIGHT ORANGE (InGaAlP) WATER CLEAR 70 200 120°
Parameter Super Bright Orange Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 195 mA
Reverse Voltage 5 V
Operating/Storage Temperature -40°C To +85°C
Symbol Parameter Device Typ. Max. Test ConditionsUnits
λpeak Peak Wavelength Super Bright Orange 610 nm IF=20mA
λDDominant Wavelength Super Bright Orange 601 nm IF=20mA
∆λ1/2 Spectral Line Half-width Super Bright Orange 29 nm IF=20mA
C Capacitance Super Bright Orange 30 pF VF=0V;f=1MHz
VFForward Voltage Super Bright Orange 2.0 2.5 V IF=20mA
IRReverse Current Super Bright Orange 10 uA VR = 5V
SPEC NO: DSAD0982 REV NO: V.2 DATE: MAR/10/2005 PAGE: 3 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.CHENG ERP: 1203000393
Super Bright Orange AP3216SEC
SPEC NO: DSAD0982 REV NO: V.2 DATE: MAR/10/2005 PAGE: 4 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.CHENG ERP: 1203000393
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
AP3216SEC
Remarks:
If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength), the condition as follows:
1.Wavelength: +/-1nm (Test condition is based on the sorting standard).
2.Luminous intensity: +/-15% (Test condition is based on the sorting standard).
3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard).