NOTES: THIRD ANGLE PROJ. @ 4 REVISIONS |. MATERIALS AND FINISHES: BODY - BRASS, NICKEL PLATING CONTACT - BRASS, GOLD PLATING INSULATOR - PTFE ELECTRICAL: A. IMPEDANCE: MECHANICAL: A. DURABILITY: B. TEMPERATURE RANGE: PACKAGING: m 19,0640,29 [.593+.010] 11, 140,25 [.437+.010] (8, 7140,25 [.343+.010] REF . <o cm &> 90 OHM 500 CYCLES MIN. 5 -69 C 10 +165 C REV DESCRIPTION DATE ECO RELEASE TO MFG. ADDED COD; STAMP "AMPHENOL" WAS "74868"\RD-DMI2092001R3] 19-Oct-12 49079 REMOVE M23329/4-01-03, MIL-CRIMP 23329 IN TITLE \RD-DM14090501J9 17-Sep-14 | 50170 A. QUANTITY: B. MARKING: BAG TO BE MARKED "AMPHENOL RF, 31-2367, AND DATE CODE" C.FERRULE & CONTACT ARE SHIPPED LOOSE SINGLE PACK SHOWS CABLE ENTRY DIMENSIONS. CUSTOMER NOTE: SOLDER CONTACT TO CABLE. WHEN CRIMPING CONTACT TO CABLE, CRIMP WITH AMPHENOL TOOL 227-944 AND DIE SET 227-l22!-l1, CAVITY B (M22520/5-11 CLOSURE B) CRIMP WITH AMPHENOL TOOL 227-944 (M22520/5-01) AND DIE SET 227-1221-11, CAVITY A (M22520/5-11, CLOSURE A). (M22520/5-01) STAMP "AMPHENOL" | [> [.125] [ INTERFACE Al AMPHENOL SPEC 349-50551, SEC. 313. TONSHdWY m 12.55 APPROX = [.494] 2,14 REF. > .418] SCALE 2.000 RECOMMENDED CABLE STRIPPING DIMENSIONS CUSTOMER OUTLINE DRAWING ALL OTHER SHEETS ARE FOR INTERNAL USE ONLY UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN METRIC AND TOLERANCES ARE: MATERIAL DRAWN DATE T | TLE <0. 5mm 0.5 - 8mm 6 - 30mm 30 - 120mm ANGLES JONA 09-Sep-14 Am he no | RF + 0.05mm 0. Imm +0. 2mm + 0.3mm +I TNC PLUG p NOTICE - These drawings, specifications, or other data (1) are, and remain the ENGINEER DATE FOR R658 g 4 /U CABLE h Inf property of Amphenol corp. must be returned upon request; an are - - confidential and not to be disclosed to any person other than those to whom they S.LI I3 Aug 2 www. amphengirl.com are given by Amphenol Corp. the furnishing of these drawings, specifications, or other data by Amphenol Corp., or to any other person to anyone for any purpose is REFERENT # 961603 AND APPROVED DATE DRAWING NO.31-2367 not to be regarded by implication or otherwise in any manner licensing, granting - - : : rights to permitting such holder or any other person to manufacture, use or sell any . S.HSTEH 09-Sep-14 SCALE: 4.0:1.0 [SHEET 2 OF 2 ITEM NO 3/-7361 product, process or design, patented or otherwise, that may in any way be related to CONFIGURATION LEVEL: OOO CAD FILE DWG SIZE REV : disclosed b id drawings, ifications, ther data. or disclosed by said drawings, specifications, or other data FINISH B W PART NO. 31-2367