Photoelectric Sensors with Separate Digital Amplifiers (Laser-type Amplifier Units) E3C-LDA Series * All three beam types provide ample long-distance detection of 1,000 mm for Diffuse Reflective Models. * Coaxial Retroreflective Models provide detection performance equivalent to through-beam sensors, simplifying Sensor installation. * Industry-first variable focal point and optical axis alignment mechanisms. Optimize for workpieces and improve inspection quality. * Drive the laser with an Amplifier the same size as a Digital Fiber Amplifier. Ordering Information Sensor Heads Sensing method Diffuse reflective Focus Model number Remarks Spot E3C-LD11 Mounting a Beam Unit (sold separately) allows the use of line and area beams. Line E3C-LD21 This model number is for the set consisting of the E39-P11 mounted to the E3C-LD11. Area E3C-LD31 This model number is for the set consisting of the E39-P21 mounted to the E3C-LD11. Coaxial retroreflective Spot (variable) (with MSR) E3C-LR11 (See note.) Mounting a Beam Unit (sold separately) allows the use of line and area beams. Spot (2.0-mm fixed dia.) E3C-LR12 (See note.) --Note: Select a reflector (sold separately) according to the application. Amplifier Units Amplifier Units with Cables Item Appearance Functions Model NPN output Advanced models PNP output Twin-output models Area output, self-diagnosis, differential operation E3C-LDA11 E3C-LDA41 External-input models Remote setting, counter, dif- E3C-LDA21 ferential operation E3C-LDA51 ATC function ATC (Active Threshold Con- E3C-LDA11AT trol) E3C-LDA41AT Analog output Analog output E3C-LDA41AN E3C-LDA11AN Amplifier Units with Connectors Item Appearance Functions Model NPN output Advanced models PNP output Twin-output models Area output, self-diagnosis, differential operation E3C-LDA6 E3C-LDA8 External-input models Remote setting, counter, dif- E3C-LDA7 ferential operation E3C-LDA9 ATC function ATC (Active Threshold Con- E3C-LDA6AT trol) E3C-LDA8AT E3C-LDA Series Photoelectric Sensors with Separate Digital Amplifiers (Laser-type Amplifier Units) 1 Amplifier Unit Connectors (Order Separately) Item Appearance Master Connector Cable length No. of conductors 2m Slave Connector Accessories (Order Separately) Beam Units Model 4 E3X-CN21 2 E3X-CN22 Applicable Sensor Head Appearance Focus E3C-LD11 E3C-LR11 Mobile Console (Order Separately) Appearance Model Model Line E39-P11 Area E39-P21 Line E39-P31 Area E39-P41 Reflectors Remarks Type Appearance Model E3X-MC11-SV2 Mobile Console with (model number of set) Head, Cable, and AC (See notes 1 and 2.) adapter provided as accessories Standard Effective area: 23 x 23 mm E39-R12 E3X-MC11-C1-S Mobile Console Standard Effective area: 7 x 7 mm E39-R13 E3X-MC11-H1 Head Short-distance transparent detection Effective area: 23 x 23 mm E39-R14 E39-Z12-1 Cable (1.5 m) Sheet (cuttable) Effective area: 195 x 22 mm E39-RS4 Sheet (cuttable) Effective area: 108 x 46 mm E39-RS5 Note 1. Use the E3X-MC11-SV2 Mobile Console for the E3C-LDA-series Amplifier Units. Other Mobile Consoles cannot be used. 2. The E3X-MC11-SV2 is an upgraded version of the E3X-MC11-S, to which a corresponding Sensor Head is added. (The E3XMC11-SV2 and E3X-MC11-S are compatible.) Specifications Ratings/Characteristics Sensor Heads Item Diffuse reflective E3C-LD11 E3C-LD21 Coaxial retroreflective (with MSR) E3C-LD31 E3C-LR11 E3C-LR11 + E39P31 E3C-LR11 + E39P41 Light source (emission wavelength) Red semiconductor laser diode (650 nm), 2.5 mW max. (JIS standard: Class 2, FDA standard: Class II) Sensing distance High-resolution mode: 30 to 1,000 mm Standard mode: 30 to 700 mm Super-high-speed mode: 30 to 250 mm (See note 1.) Beam size (See note 3.) 0.8 mm max. (at distances up to 300 mm) 33 mm (at 150 mm) 7m 5m 2m (See note 2.) 33 x 15 mm (at 0.8 mm max. 150 mm) (at distances up to 1,000 mm) E3C-LR12 1 mW max. (JIS standard Class 1) 1,700 mm, 1,300 mm 700 mm (See note 2.) 900 mm 700 mm 400 mm (See note 2.) 7m 5m 2m (See note 2.) 28 mm (at 150 mm) 28 x 16 mm (at 150 mm) 2.0 mm dia. (at distances up to 1,000 mm) Functions Variable focal point mechanism (beam size adjustment) (See note 4.), optical axis adjustment mechanism (axis adjustment) Indicators LDON indicator: Green; Operation indicator: Orange Ambient illumination (receiver side) 3,000 lx (incandescent lamp) Ambient temperature Operating: -10C to 55C; Storage: -25C to 70C (with no icing or condensation) Ambient humidity Operating/storage: 35% to 85% (with no condensation) Vibration resistance (destruction) 10 to 150 Hz with double amplitude of 0.7 mm, in X, Y, and Z directions for 80 min each Degree of protection IEC 60529: IP40 Materials Case and cover: Front surface filter: Weight (packed) Approx. 85 g ABS Acrylic resin Case and cover: ABS Front surface filter: Glass Approx. 100 g Note 1. Values are sensed for white paper. 2. These values apply when a E39-R12 Reflector is used. The MSR function is built-in. The reflected light from the object being measured may affect the sensing accuracy, so adjust the threshold value before use. 3. The beam radius is the value for the middle measurement distance and indicates a typical value for the middle sensing distance. The radius is defined by light intensity of 1/e2 (13.5%) of the central light intensity. Light will extend beyond the main beam and may be affected by conditions surrounding the object being measured. 4. The E3C-LR12 has a fixed beam size (the focus point cannot be changed). 2 E3C-LDA Series Photoelectric Sensors with Separate Digital Amplifiers (Laser-type Amplifier Units) Amplifier Units Type External-input models Model NPN output E3C-LDA21 Item PNP output E3C-LDA51 Twin-output models ATC-output models Analog-output models E3C-LDA7 E3C-LDA11 E3C-LDA6 E3CLDA11AT E3C-LDA6AT E3C-LDA11AN E3C-LDA9 E3C-LDA41 E3C-LDA8 E3CLDA41AT E3C-LDA8AT E3C-LDA41AN Supply voltage 12 to 24 VDC 10%, ripple (p-p) 10% max. Power consumption 1,080 mW max. (current consumption: 45 mA max. at power supply voltage of 24 VDC) ConON/OFF output trol output Analog output Load power supply voltage: 26.4 VDC max.; NPN/PNP (depends on model) open collector Load current: 50 mA max.; residual voltage: 1 V max. ReSuper-high-speed sponse mode time High-speed mode Functions --- Control output Voltage output: 1 to 5 VDC (connected load 10 k min.) Temperature characteristics 0.3% F.S./C Response time/Repeat accuracy Super-high-speed mode: 100 s/ 4.0% F.S. High-speed mode: 250 s/4.0% F.S. Standard mode: 1 ms/2.0% F.S. High-resolution mode: 4 ms/2.0% F.S. 80 s for operation and reset 100 s for operation and reset 250 s for operation and reset Standard mode 1 ms for operation and reset High-resolution mode 4 ms for operation and reset Differential detection Switchable between single edge and double edge detection mode. Single edge: Can be set to 250 s, 500 s, 1 ms, 10 ms, or 100 ms. Double edge: Can be set to 500 s, 1 ms, 2 ms, 20 ms, or 200 ms. Select from OFF-delay, ON-delay, or one-shot timer. 1 ms to 5 s (1 to 20 ms set in 1-ms increments, 20 to 200 ms set in 10-ms increments, 200 ms to 1 s set in 100-ms increments, and 1 to 5 s set in 1-s increments) Timer function Zero-reset Negative values can be displayed. Initial reset Settings can be returned to defaults as required. Mutual interference prevention Possible for up to 10 Units. (See note.) Counter Switchable between up counter and down counter. Set count: 0 to 9,999,999 I/O settings External input setting (Se- Output setting (Select from channel 2 output, area outlect from teaching, power tuning, zero reset, light OFF, put, or self-diagnosis.) or counter reset.) --- Analog output setting (Offset voltOutput setting (Select from channel 2 output, area output, age can be adjusted.) self-diagnosis, or ATC error output.) Digital display Select from digital incident level + threshold or six other patterns. Display orientation Switching between normal/reversed display is possible. Ambient temperature range Operating: Ambient humidity range Operating and storage: 35% to 85% (with no condensation) Insulation resistance 20 M at 500 VDC Storage: Groups of 1 to 2 Amplifiers: -25C to 55C Groups of 3 to 10 Amplifiers: -25C to 50 C Groups of 11 to 16 Amplifiers: -25C to 45C -30 C to 70C (with no icing) Dielectric strength 1,000 VAC at 50/60 Hz for 1 min. Vibration resistance Destruction: 10 to 150 Hz, 0.7-mm double amplitude for 80 min each in X, Y, and Z directions Shock resistance Destruction: 500 m/s2, 3 times each in X, Y, Z directions Degree of protection IP50 (IEC 60529) Connection method Prewired cable or wire-reducing connector Weight (packed state) With prewired cable: Approx. 100 g With wire-reducing connector: Approx. 55 g Materi- Case als Cover Polybutylene terephthalate (PBT) Polycarbonate Note: Communications are disabled if super-high-speed mode is selected, and the mutual interference prevention function and the communications function for the Mobile Console will not function. E3C-LDA Series Photoelectric Sensors with Separate Digital Amplifiers (Laser-type Amplifier Units) 3 Dimensions Sensor Head E3C-LD11 E3C-LR11 12.8 33 12.8 39 25 25 33 27.7 Two, 3.2-dia. mounting holes 5.1 20 R 4.8 25 18.8 Two, R 2.6 3.1 27 Connector Round und vinyl-clad cable, 1.8 dia. x 2 conductors (cross-sectional area of conductor: 0.15 mm2) Standard length: 2 m 18 Reflector Amplifier Unit E39-R12/-R14 E39-R13 E3C-LDA11 10 30 12 76 24 17.2 45 37 32 This document provides information mainly for selecting suitable models. Please read the Instruction Sheet carefully for information that the user must understand and accept before purchase, including information on warranty, limitations of liability, and precautions. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. E338-E1-04 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company Sensing Devices Division H.Q. Application Sensors Division Shiokoji Horikawa, Shimogyo-ku, Kyoto, 600-8530 Japan Tel: (81)75-344-7068/Fax: (81)75-344-7107 Printed in Japan 1205-0.2M (1202) (M) Read and Understand This Catalog Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranty and Limitations of Liability WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. LIMITATIONS OF LIABILITY OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS, OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR. Application Considerations SUITABILITY FOR USE OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the product. At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products: * Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog. * Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. * Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Disclaimers CHANGE IN SPECIFICATIONS Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the product may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased product. DIMENSIONS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. ERRORS AND OMISSIONS The information in this catalog has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions. PERFORMANCE DATA Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON's test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability. PROGRAMMABLE PRODUCTS OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof. COPYRIGHT AND COPY PERMISSION This catalog shall not be copied for sales or promotions without permission. This catalog is protected by copyright and is intended solely for use in conjunction with the product. Please notify us before copying or reproducing this catalog in any manner, for any other purpose. If copying or transmitting this catalog to another, please copy or transmit it in its entirety. Cat. No. E338-E1-04 OMRON Corporation 2007. 3 In the interest of product improvement, specifications are subject to change without notice. Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2007 All Rights Reserved.