© Semiconductor Components Industries, LLC, 2006
September, 2006 Rev. 4
1Publication Order Number:
MBR2545CTP/D
MBR2545CTP
SWITCHMODE
Power Rectifier
. . . using the Schottky Barrier principle with a platinum barrier
metal. These stateoftheart devices have the following features:
Guardring for Stress Protection
Low Forward Voltage
175°C Operating Junction Temperature
Mechanical Characteristics:
Case: Epoxy, Molded
Weight: 1.9 grams (approximately)
Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
Lead Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
Shipped 50 units per plastic tube
Marking: B2545P
MAXIMUM RATINGS
Rating Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
45 V
Average Rectified Forward Current
(Rated VR, TC = 130°C)
IF(AV) 30 A
Peak Repetitive Forward Current
(Rated VR, Square Wave, 20 kHz,
TC = 130°C) Per Diode Leg
IFRM 30 A
NonRepetitive Peak Surge Current
(Surge Applied at Rated Load
Conditions Halfwave, Single
Phase, 60 Hz) Per Diode Leg
IFSM 150 A
Peak Repetitive Reverse Surge
Current (2.0 ms, 1.0 kHz)
IRRM 1.0 A
Storage Temperature Range Tstg 65 to +175 °C
Operating Junction Temperature
(Note 1)
TJ65 to +175 °C
Voltage Rate of Change (Rated VR) dv/dt 10,000 V/ms
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. The heat generated must be less than the thermal conductivity from
JunctiontoAmbient: dPD/dTJ < 1/RqJA.
Device Package Shipping
ORDERING INFORMATION
MBR2545CTP TO220
CASE 221A
TO220AB
PLASTIC
50 Units/Rail
3
4
1
SCHOTTKY BARRIER
RECTIFIER
30 AMPERES
45 VOLTS
1
3
2, 4
2
MARKING DIAGRAM
YY WW
B2545P
AKA
YY = Year
WW = Work Week
B2545P= Device Code
AKA = Diode Polarity
http://onsemi.com
MBR2545CTP
http://onsemi.com
2
THERMAL CHARACTERISTICS (Per Diode Leg)
Characteristic Symbol Value Unit
Maximum Thermal Resistance, Junction to Case RθJC 2.0 °C/W
ELECTRICAL CHARACTERISTICS (Per Diode Leg)
Maximum Instantaneous Forward Voltage (Note 2)
(iF = 30 Amps, TC = 125°C)
(iF = 30 Amps, TC = 25°C)
vF
0.73
0.82
Volts
Maximum Instantaneous Reverse Current (Note 2)
(Rated dc Voltage, TC = 125°C)
(Rated dc Voltage, TC = 25°C)
iR
40
0.2
mA
2. Pulse Test: Pulse Width = 300 μs, Duty Cycle ≤2.0%
Figure 1. Maximum Forward Voltage
VF
, INSTANTANEOUS FORWARD VOLTAGE (VOLTS)
100
10
1
0.50.40.30.1
Figure 2. Typical Forward Voltage
0.1
iF
, INSTANTANEOUS FORWARD CURRENT (A)
0.80.70.6 0.9
VF
, INSTANTANEOUS FORWARD VOLTAGE (VOLTS)
10
1
0.50.40.30.1
0.1
iF
, INSTANTANEOUS FORWARD CURRENT (A)
0.80.70.6 0.9
100
0.2
Figure 3. Typical Reverse Current
VR, REVERSE VOLTAGE (VOLTS)
0.01
0.001
0.0001
151050
Figure 4. Typical Capacitance
302520 454035
VR, REVERSE VOLTAGE (VOLTS)
400
200
2015100
0353025 50550
IR, REVERSE CURRENT (A)
0.00001
0.000001 4540
800
600
1000
1400
1200
C, CAPACITANCE (pF)
125°C
25°C
75°C125°C
25°C
75°C
125°C
25°C
75°C
0.2
MBR2545CTP
http://onsemi.com
3
Figure 5. Current Derating, Case, Per Diode
TC, CASE TEMPERATURE (°C)
25
15
135115
Figure 6. Forward Power Dissipation, Per Diode
145140 150
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
2
50
010 25
14
155 15
4
10
6
10
5
0
IF(AV), AVERAGE FORWARD CURRENT (A)
RATED
VOLTAGE
APPLIED
dc
SQUARE WAVE
PF(AV), AVERAGE FORWARD
POWER DISSIPATION (W)
dc
SQUARE WAVE
20
20
8
12
130125120
MBR2545CTP
http://onsemi.com
4
PACKAGE DIMENSIONS
TO220 THREELEAD
TO220AB
CASE 221A09
ISSUE AA
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION Z DEFINES A ZONE WHERE ALL
BODY AND LEAD IRREGULARITIES ARE
ALLOWED.
DIM MIN MAX MIN MAX
MILLIMETERSINCHES
A0.570 0.620 14.48 15.75
B0.380 0.405 9.66 10.28
C0.160 0.190 4.07 4.82
D0.025 0.035 0.64 0.88
F0.142 0.147 3.61 3.73
G0.095 0.105 2.42 2.66
H0.110 0.155 2.80 3.93
J0.018 0.025 0.46 0.64
K0.500 0.562 12.70 14.27
L0.045 0.060 1.15 1.52
N0.190 0.210 4.83 5.33
Q0.100 0.120 2.54 3.04
R0.080 0.110 2.04 2.79
S0.045 0.055 1.15 1.39
T0.235 0.255 5.97 6.47
U0.000 0.050 0.00 1.27
V0.045 −−− 1.15 −−−
Z−−− 0.080 −−− 2.04
B
Q
H
Z
L
V
G
N
A
K
F
123
4
D
SEATING
PLANE
T
C
S
T
U
R
J
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 8002829855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81357733850
MBR2545CTP/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 3036752175 or 8003443860 Toll Free USA/Canada
Fax: 3036752176 or 8003443867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
SWITCHMODE is a trademark of Semiconductor Components Industries, LLC.