Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 35 | Polyamide PA 6.6 |
Modular feed-through terminals | 6 mm²
- 1 -
General ordering data
Order No. 0380560000
Part designation SAK 6/35
Version Feed-through terminal, 6 mm², Screw connection,
PA 66, beige, TS 35
EAN 4008190134648
Qty. 100 pc(s).
Product notes
Note, ordering data With AWG 6 and H07V-R10 conductors, an
increased MD torque of 1.4 to1.6 Nm should be
used.
Note, technical data For AWG 8-7 and AWG 8-19, tightening torque is
1.21.4 Nm
Note, accessories When used with twin ferrules ZH 0.5 - ZH 4, the
rated voltage is 690 V.
PT OKIECEx/ATEX rating data
EU-type examination certificate KEMA97ATEX1798U
Download, German KEMA97ATEX1798U_d.pdf
Download English KEMA97ATEX1798U_e.pdf
ATEX voltage 550 V
ATEX current 36 A
ATEX conductor cross-section 6 mm²
Voltage when using cross-connections CrossConnectionGuide.pdf
Operating temperature range Einsatztemperaturbereich siehe EG-
Baumusterprüfbescheinigung/IECEx-Certificate of
Conformity
Marking EN 60079-7 Ex e II
Marking ATEX Directive 94/9/EC Ex II 2 G D
Additional technical data
Colour of insulating material beige
Connection direction on side
End plate required Yes
Explosion-tested version "Ex e" Yes
Installation advice TS 35
Insulating material PA 66
Levels cross-connected internally No
No. of identical terminals 1
No. of levels 1
Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 35 | Polyamide PA 6.6 |
Modular feed-through terminals | 6 mm²
- 2 -
Additional technical data
No. of terminal strips per level 2
Open sides right
Operating temperature range - 50 °C, + 100 °C
Type of connection Screwed
Type of mounting Snap-on
UL 94 flammability rating of insulation material V2
Version Feed-through terminal
CSA rating data
Voltage (CSA) 600 V
CSA current 47 A
Min. cross-section (CSA) AWG 20
Max. cross-section (CSA) AWG 8
Conductors for clamping (additional
connection)
Flexible with ferrule, min. (DIN 46228 pt 1) 0.5 mm²
Flexible with ferrule, max. (DIN 46228 pt 1) 6 mm²
Conductors for clamping (rated connection)
Clamping range, min. 0.33 mm²
Clamping range, max. 10 mm²
Type of connection Screw connection
2nd type of connection screwed
Connection direction on side
No. of connections 2
Stripping length 12 mm
Clamping screw M 3.5
Blade size 4.0 x 0.8 mm
Tightening torque range 0.8...1.6 Nm
Torque level with DMS electric screwdriver 3
Gauge to IEC 60947-1 A5
Solid, min. 0.5 mm²
Solid, max. 10 mm²
Stranded, min. 0.5 mm²
Stranded, max. 6 mm²
Flexible, min. 0.5 mm²
Flexible, max. 10 mm²
Flexible with ferrule, min. (DIN 46228/1) 0.5 mm²
Flexible with ferrule, max. (DIN 46228/1) 6 mm²
Flexible, min., ferrule with plastic collar (DIN
46228 pt 4)
0.5 mm²
Flexible, max., ferrule with plastic collar (DIN
46228 pt 4)
6 mm²
Twin wire-end ferrule, min. 0.5 mm²
Twin wire end ferrule, max. 4 mm²
AWG conductor size, min. AWG 22
AWG conductor size, max. AWG 8
AWG conductor size, min. 0.33 mm²
AWG conductor size, max. 8.37 mm²
Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 35 | Polyamide PA 6.6 |
Modular feed-through terminals | 6 mm²
- 3 -
Dimensions
Width 8 mm
Height of lowest version 44 mm
Length 45 mm
TS 35 offset 22.5 mm
Disconnect terminals
Torque level with DMS electric screwdriver 3
Rating data
Rated cross-section 6 mm²
Rated voltage 800 V
Rated impulse voltage 8 kV
Rated current 41 A
Standards IEC 60947-7-1
Current with max. conductor 57 A
Pollution severity 3
UL rating data
Voltage (UL) 600 V
Current (UL) 40 A
Min. cross-section (UL) AWG 22
Max. cross-section (UL) AWG 8
Approvals
Approvals institutes
Downloads
STEP 0380560000_04800_SAK_6-35_STP.stp
Classifications
ETIM 2.0 EC000897
ETIM 3.0 EC000897
eClass 4.1 27-14-11-20
eClass 5.0 27-14-11-20
eClass 5.1 27-14-11-20
Similar products
Order No. Part designation Version
0380580000 SAK 6/35 PA/BL Feed-through terminal, 6 mm², Screw connection, PA 66, blue, TS
35
