1-45
Catalog 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 01-09 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
LSTT
RAYCHEM Tubing Products
1
Heat-shrinkable Tubing
Available in: Americas Europe Asia Pacific
■
Applications
LSTT is a highly flexible,
low-shrink-temperature,
heat-shrinkable tubing. Its
low shrink temperature
offers exceptionally fast
recovery for maximum
efficiency in high-volume
commercial applications
and makes it suitable for
use on or near delicate,
temperature-sensitive
materials, such as PVC
jacketed wire and cable.
Although not flame-
retardant, LSTT meets
the automotive flame
propagation standard
MVSS 302.
Typical applications
include electrical
termination insulation,
color-coding, covering of
heat-sensitive devices,
cosmetic coverings, and
mechanical protection.
Series Industry Raychem
LSTT MVSS302 RW-2051
Low-Shrink-Temperature,
Non-Flame-Retardant,
Heat-Shrinkable, Polyolefin
tubing
Product Facts
■2:1 shrink ratio
■Rapid recovery at low
temperatures
■Can be used with
temperature-sensitive
materials
■Flexible
■Not flame-retardant
■Excellent physical and
electrical performance
■RoHS compliant
Specifications/Approvals
Installation
Minimum shrink
temperature: 65°C [149°F]
Minimum full recovery
temperature: 110°C [230°F]
Operating Temperature Range
-40°C to 125°C
[-40°F to 257°F]
1-46
RAYCHEM Tubing Products
Catalog 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 01-09 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
LSTT (Continued)
Color Standard Black (-0), red (-2), blue (-6), yellow (-4)
Nonstandard Green (-5), grey (-8), white (-9), clear (-X)
Size selection Always order the largest size that will shrink snugly over the component to be covered.
Other sizes are available upon request.
Standard packaging On spools***
Ordering description Specify product name, size and color (for example, LSTT 6.4-0).
***Available in the convenient RaySpool packaging/dispensing system, for sizes 2.4 up to 25.4
Product Dimensions
Ordering Information
Inside Diameter Recovered Wall Thickness*
Size Minimum Expanded Maximum Recovered Nominal
as Supplied After Heating After Heating
1.6 1.6 [0.063] 0.8 [0.031] 0.50 ± 0.12 [0.018 ± 0.005]
2.4 2.4 [0.093] 1.2 [0.046] 0.55 ± 0.12 [0.022 ± 0.005]
3.2 3.2 [0.125] 1.6 [0.062] 0.55 ± 0.12 [0.022 ± 0.005]
4.8 4.8 [0.187] 2.4 [0.093] 0.55 ± 0.12 [0.022 ± 0.005]
6.4 6.4 [0.250] 3.2 [0.125] 0.65 ± 0.15 [0.026 ± 0.006]
9.5 9.5 [0.375] 4.8 [0.187] 0.65 ± 0.15 [0.026 ± 0.006]
12.7 12.7 [0.500] 6.4 [0.250] 0.65 ± 0.15 [0.026 ± 0.006]
19.0 19.0 [0.748] 9.5 [0.375] 0.80 ± 0.15 [0.032 ± 0.006]
25.4 25.4 [1.000] 12.7 [0.500] 0.95 ± 0.18 [0.037 ± 0.007]
32.0 32.0 [1.260] 16.0 [0.630] 1.05 ± 0.20 [0.041 ± 0.008]
38.0 38.0 [1.496] 19.0 [0.748] 1.05 ± 0.20 [0.041 ± 0.008]
52.0** 52.0 [2.047] 26.0 [1.024] 1.14 ± 0.18 [0.045 ± 0.007]
*Wall thickness will be les if tubing recovery is restricted during shrinkage.
**Available in black only.
1-47
Catalog 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 01-09 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
MicroFit
RAYCHEM Tubing Products
1
Heat-shrinkable Tubing
Small-Diameter,
High-Shrink-Ratio Tubing
Product Facts
■Small diameter
■High shrink ratio
■Thin wall
■Polyolefin and
fluoropolymer materials
■RoHS compliant
Specifications/Approvals Series Material Master File Number Raychem
Altera MicroFit USP Class VI (MT1000) MAF-444 (MT1000) Altera MicroFit SCD
USP Class VI (MT2000) MAF-727 (MT2000)
Available in: Americas Europe Asia Pacific
■■■
Applications
The family of MicroFit small
diameter, high-shrink-ratio
tubing is suitable for electri-
cal insulation, mechanical
protection, and strain relief
in smaller, more compact
medical devices and
commercial electronics
products. Offered in a
variety of materials.
Installation
Minimum full recovery
temperature:
175°C [347°F] (MT1000)
140°C [284°F] (MT2000)
Operating Temperature Range
MT1000:-55°C to 175°C
[-67°F to 347°F]
MT2000:-40°C to 105°C
[-40°F to 221°F]
1-48
RAYCHEM Tubing Products
Catalog 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 01-09 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
MicroFit (Continued)
Inside Diameter Wall Thickness
Minimum Maximum As Supplied Recovered***
Size Expanded Recovered (Nominal) (Maximum)
as Supplied After Heating
MFT-*-No. 1-** 0.356 [0.014] 0.178 [0.007] 0.076 [0.003] 0.127 [0.005]
MFT-*-No. 2-** 0.610 [0.024] 0.305 [0.012] 0.064 [0.0025] 0.152 [0.006]
MFT-*-No. 33-** 1.143 [0.045] 0.432 [0.017] 0.064 [0.0025] 0.178 [0.007]
MFT-*-No. 65-** 0.635 [0.025] 0.254 [0.010] 0.127 [0.005] 0.330 [0.013]
*Replace single asterisk with material type: MT1000 or MT2000.
**Replace double asterisk with color-code number.
***Wall thickness will be less if tubing recovery is restricted during shrinkage.
Product Dimensions
MT1000 MT2000
Color Standard Translucent (-X) Black (-0), clear (-X)
Nonstandard Black (-0) White (-9), red (-2), yellow (-4),
blue (-6), orange (-3)
Size selection Always order the largest size that will shrink snugly over the component to be covered.
Standard packaging On plastic spools****
Ordering description Specify product name, material, size and color (for example, MFT-MT2000-NO.1-0).
****MFT-MT1000 and MFT-MT2000 are double bagged.
Ordering Information
1-49
Catalog 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 01-09 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
MT1000
RAYCHEM Tubing Products
1
Heat-shrinkable Tubing
Altera Medical-Grade,
USP Class VI,
High-Temperature,
Semirigid,
Fluoropolymer Tubing
Product Facts
■2:1 shrink ratio
■Tough, semirigid,
very-thin-wall insulation
■Excellent resistance to a
variety of fluids
■Optional inner adhesive
lining (MT1000A)
■USP Class VI material,
no heavy metals
■Double-bagged packaging
■Compatibility with gamma,
ETO, steam, and dry-heat
sterilization
■RoHS compliant
Specifications/Approvals Series Material Master File Number Raychem
MT1000 USP Class VI MAF-444 MT1000 SCD
MT1000A USP Class VI MAF-798 MT1000A SCD
Available in: Americas Europe Asia Pacific
■■■
Applications
Well-suited for electrical
insulation and strain relief of
components that are
exposed to high tempera-
tures - either during opera-
tion or during sterilization.
Thin-wall construction is
well-suited for applications
with clearance constraints.
Installation
Minimum shrink
temperature: 155°C [311°F}
Minimum full recovery
temperature: 175°C
[347°F]
Operating Temperature Range
-55°C to 175°C
[-67°F to 347°F]
1-50
RAYCHEM Tubing Products
Catalog 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 01-09 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
MT1000 (Continued)
Color Standard Black (-0), Translucent (-X)
Nonstandard White (-9)
Size selection Always order the largest size that will shrink snugly over the component to be covered.
Special order sizes are available upon request.
Standard packaging In 1.2-meter (4-foot) lengths, double bagged.
Ordering description Specify product name, size and color (for example, MT1000-1/8-X).
Specify MT1000A for adhesive-lined constructions (special order).
Product Dimensions
Ordering Information
Inside Diameter Recovered Wall Thickness*
Size Minimum Expanded Maximum Recovered
as Supplied After Heating After Heating
3/64 1.17 [0.046] 0.58 [0.023] 0.25 ± 0.05 [0.010 ± 0.002]
1/16 1.6 [0.063] 0.8 [0.031] 0.25 ± 0.05 [0.010 ± 0.002]
3/32 2.4 [0.093] 1.2 [0.046] 0.25 ± 0.05 [0.010 ± 0.002]
1/8 3.2 [0.125] 1.6 [0.062] 0.25 ± 0.05 [0.010 ± 0.002]
3/16 4.7 [0.187] 2.4 [0.093] 0.25 ± 0.05 [0.010 ± 0.002]
1/4 6.4 [0.250] 3.2 [0.125] 0.33 ± 0.05 [0.013 ± 0.002]
3/8 9.5 [0.375] 4.7 [0.187] 0.33 ± 0.05 [0.013 ± 0.002]
1/2 12.7 [0.500] 6.4 [0.250] 0.33 ± 0.05 [0.013 ± 0.002]
3/4** 19.1 [0.750] 9.5 [0.375] 0.43 ± 0.08 [0.017 ± 0.003]
1** 25.4 [1.000] 12.7 [0.500] 0.48 ± 0.08 [0.019 ± 0.003]
*Wall thickness will be less if tubing recovery is restricted during shrinkage.
**Nonstandard size; available by special order only.
1-51
Catalog 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 01-09 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
MT2000
RAYCHEM Tubing Products
1
Heat-shrinkable Tubing
Altera Medical-Grade,
USP Class VI, Lubricious,
Thin-Wall, Polyolefin
Tubing
Product Facts
■2.5:1 shrink ratio
■Lubricity comparable to FEP
■Excellent electrical
insulation properties
■Can be manufactured with
a very thin wall
■Optional inner adhesive
lining (MT2000A)
■USP Class VI material,
no heavy metals
■Plastic spools and
double-bagged packaging
■Compatibility with gamma
and ETO sterilization
■RoHS compliant
Specifications/Approvals Series Material Master File Number Raychem
MT2000 USP Class VI MAF-727 MT2000 SCD
MT2000A USP Class VI MAF-799 MT2000A SCD
Available in: Americas Europe Asia Pacific
■■■
Applications
Especially suitable for
medical applications
requiring lubricity, flexibility,
and excellent electrical
insulation performance.
A cost-effective alternative
to FEP (fluorinated
ethylene-propylene) while
maintaining performance
after gamma sterilization.
Installation
Minimum shrink
temperature: 110°C [230°F]
Minimum full recovery
temperature: 140°C [284°F]
Operating Temperature Range
-40°C to 105°C
[-40°F to 221°F]
1-52
RAYCHEM Tubing Products
Catalog 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 01-09 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
MT2000 (Continued)
Inside Diameter Wall Thickness
Minimum Maximum As Supplied Recovered*
Size Expanded Recovered (Nominal) After Heating
as Supplied After Heating
1.0 1.0 [0.040] 0.45 [0.018] 0.12 [0.005] 0.25 ± 0.05 [0.010 ± 0.002]
2.0 2.0 [0.080] 0.80 [0.032] 0.12 [0.005] 0.25 ± 0.05 [0.010 ± 0.002]
3.0 3.0 [0.120] 1.20 [0.048] 0.12 [0.005] 0.25 ± 0.05 [0.010 ± 0.002]
6.0 6.0 [0.240] 2.40 [0.096] 0.12 [0.005] 0.25 ± 0.05 [0.010 ± 0.002]
10.0 10.0 [0.400] 4.00 [0.160] 0.15 [0.006] 0.36 ± 0.05 [0.014 ± 0.002]
*Wall thickness will be less if tubing recovery is restricted during shrinkage.
Product Dimensions
Color Standard Black (-0), clear (-X)
Nonstandard White (-9), red (-2), blue (-6), yellow (-4), orange (-3)
Size selection Always order the largest size that will shrink snugly over the component to be covered.
Special order sizes are available upon request.
Standard packaging On plastic spools, double-bagged.
Ordering description Specify product name, size and color (for example, MT2000-3.0-0).
Specify MT2000A for adhesive-lined constructions (special order).
Ordering Information
1-53
Catalog 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 01-09 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
MT3000
RAYCHEM Tubing Products
1
Heat-shrinkable Tubing
Altera Medical-Grade,
USP Class VI,
High-Temperature,
Flexible, Fluoropolymer
Tubing
Product Facts
■2:1 shrink ratio
■Tough, flexible,
very-thin-wall insulation
■Excellent resistance to a
variety of fluids
■Optional inner adhesive
lining (MT3000A)
■USP Class VI material,
no heavy metals
■Plastic spools and
double-bagged packaging
■Compatibility with steam
(limited cycles), gamma,
ETO, and dry-heat
sterilization
■RoHS compliant
Specifications/Approvals Series Material Master File Number Raychem
MT3000 USP Class VI MAF-472 MT3000 SCD
MT3000A USP Class VI MAF-472 MT3000A SCD
Available in: Americas Europe Asia Pacific
■■■
Applications
Used for electrical insulation
and strain relief of compo-
nents that are exposed to
high temperatures - either
during operation or during
sterilization. Exceptional
flexibility and thin-wall con-
struction are well-suited for
applications where pliancy
coupled with small overall
bundle size is desired.
Installation
Minimum shrink
temperature: 110°C [230°F]
Minimum full recovery
temperature: 150°C [302°F]
Operating Temperature Range
-55°C to 150°C
[-67°F to 302°F]
1-54
RAYCHEM Tubing Products
Catalog 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 01-09 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
MT3000 (Continued)
Color Standard Black (-0)
Nonstandard White (-9)
Size selection Always order the largest size that will shrink snugly over the component to be covered.
Special order sizes are available upon request.
Standard packaging On plastic spools, double-bagged.
Ordering description Specify product name, size and color (for example, MT3000 1/4-0).
Product Dimensions
Ordering Information
Inside Diameter Recovered Wall Thickness*
Size Minimum Expanded Maximum Recovered
as Supplied After Heating After Heating
3/64 1.17 [0.046] 0.58 [0.023] 0.25 ± 0.05 [0.010 ± 0.002]
1/16 1.6 [0.063] 0.8 [0.031] 0.25 ± 0.05 [0.010 ± 0.002]
3/32 2.4 [0.093] 1.2 [0.046] 0.25 ± 0.05 [0.010 ± 0.002]
1/8 3.2 [0.125] 1.6 [0.062] 0.25 ± 0.05 [0.010 ± 0.002]
3/16 4.7 [0.187] 2.4 [0.093] 0.25 ± 0.05 [0.010 ± 0.002]
1/4 6.4 [0.250] 3.2 [0.125] 0.30 ± 0.05 [0.012 ± 0.002]
3/8 9.5 [0.375] 4.7 [0.187] 0.30 ± 0.05 [0.012 ± 0.002]
1/2 12.7 [0.500] 6.4 [0.250] 0.30 ± 0.05 [0.012 ± 0.002]
3/4** 19.1 [0.750] 9.5 [0.375] 0.43 ± 0.08 [0.017 ± 0.003]
1** 25.4 [1.000] 12.7 [0.500] 0.48 ± 0.08 [0.019 ± 0.003]
*Wall thickness will be less if tubing recovery is restricted during shrinkage.
**Nonstandard size; available by special order only.
1-55
Catalog 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 01-09 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
MT5000
RAYCHEM Tubing Products
1
Heat-shrinkable Tubing
Altera Medical-Grade,
USP Class VI, Flexible,
Polyolefin Tubing
Product Facts
■2:1 shrink ratio
■Flexibility; variety of colors
■Excellent electrical
insulation properties
■Inner adhesive lining
optional (MT5000A)
■USP Class VI material,
no heavy metals
■Plastic spools and
double-bagged packaging
■Compatibility with gamma
and ETO sterilization
■RoHS compliant
Specifications/Approvals Series Material Master File Number Raychem
MT5000 USP Class VI MAF-469 MT5000 SCD
MT5000A USP Class VI MAF-800 MT5000A SCD
Applications
Especially suitable for
applications requiring
excellent electrical
insulation performance
and resistance to abrasion
and harmful solvents such
as electrosurgical
instruments. Also used for
strain relief, color coding,
and identification of many
medical components and
devices.
Installation
Minimum shrink
temperature: 90°C [194°F]
Minimum full recovery
temperature: 110°C [230°F]
Operating Temperature Range
-70°C to 105°C
[-94°F to 221°F]
Available in: Americas Europe Asia Pacific
■■■
1-56
RAYCHEM Tubing Products
Catalog 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 01-09 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
MT5000 (Continued)
Color Standard Black (-0), clear (-X), and blue (-6)
Nonstandard White (-9), red (-2), yellow (-4), green (-5)
Size selection Always order the largest size that will shrink snugly over the component to be covered.
Special order sizes are available upon request.
Standard packaging On plastic spools, double-bagged.
Ordering description Specify product name, size and color (for example, MT5000-1/4-0).
Specify MT5000A for adhesive-lined constructions (special order).
Product Dimensions
Ordering Information
Inside Diameter Recovered Wall Thickness*
Size Minimum Expanded Maximum Recovered
as Supplied After Heating After Heating
3/64 1.17 [0.046] 0.58 [0.023] 0.40 ± 0.08 [0.016 ± 0.003]
1/16 1.6 [0.063] 0.8 [0.031] 0.43 ± 0.08 [0.017 ± 0.003]
3/32 2.4 [0.093] 1.2 [0.046] 0.51 ± 0.08 [0.020 ± 0.003]
1/8 3.2 [0.125] 1.6 [0.062] 0.51 ± 0.08 [0.020 ± 0.003]
3/16 4.8 [0.187] 2.4 [0.093] 0.51 ± 0.08 [0.020 ± 0.003]
1/4 6.4 [0.250] 3.2 [0.125] 0.64 ± 0.08 [0.025 ± 0.003]
3/8 9.5 [0.375] 4.8 [0.187] 0.64 ± 0.08 [0.025 ± 0.003]
1/2 12.7 [0.500] 6.4 [0.250] 0.64 ± 0.08 [0.025 ± 0.003]
3/4** 19.1 [0.750] 9.5 [0.375] 0.76 ± 0.08 [0.030 ± 0.003]
1** 25.4 [1.000] 12.7 [0.500] 0.89 ± 0.12 [0.035 ± 0.005]
*Wall thickness will be less if tubing recovery is restricted during shrinkage.
**Nonstandard size; available by special order only.
1-57
Catalog 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 01-09 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
MT6000
RAYCHEM Tubing Products
1
Heat-shrinkable Tubing
Available in: Americas Europe Asia Pacific
■■■
Series Material Raychem
MT6000 USP Class VI MT6000 SCD
MT6000A USP Class VI MT6000A SCD
Altera Medical-Grade, USP
Class VI, High Shrink Ratio,
Polyolefin Tubing
Product Facts
■4:1 shrink ratio or greater
■Custom and larger shrink
ratios available
■Flexible; variety of colors
■Excellent electrical
insulation properties
■Inner adhesive lining
optional (MT6000A)
■USP Class VI material, no
heavy metals
■Plastic spools and double-
bagged packaging
■Compatibility with gamma
and ETO sterilization
■RoHS compliant
Specifications/Approvals
Applications
Designed for applications
that need 4:1 or larger
shrink ratios. Provides
excellent electrical insula-
tion performance and
resistance to abrasion and
harmful solvents. Also used
for strain relief, color
coding, identification of
components and devices,
and process aid.
Installation
Minimum shrink
temperature: 90°C [194ºF]
Minimum full recovery
temperature: 110°C [230ºF]
Operating Temperature Range
-70°C to 90°C
[-94ºF to 194ºF]
1-58
RAYCHEM Tubing Products
Catalog 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 01-09 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
MT6000 (Continued)
Color Standard Black (-0), clear (-X)
Nonstandard Blue (-6), red (-2), white (-9), yellow (-4), green (-5)
Size selection Always order the largest size that will recover snugly over the substrate.
Special order sizes are available upon request.
Standard packaging On plastic spools, double-bagged
Ordering description Specify product name, size and color (for example, MT6000-3/16-X)
Specify MT6000A for adhesive-lined constructions (special order)
Product Dimensions
Ordering Information
As Supplied Recovered
Size Inside Diameter (D) Inside Diameter (d) Wall Thickness (W)
Minimum Maximum Nominal
in. in. in.
1/16 .063 [1.60] .015 [0.38] .016 ± .003 [0.40 ± .007]
3/32 .093 [2.36] .023 [0.58] .016 ± .003 [0.40 ± .007]
1/8 .125 [3.18] .031 [0.79] .017 ± .003 [0.43 ± .007]
3/16 .187 [4.75] .046 [1.17] .020 ± .003 [0.50 ± .007]
1/4 .250 [6.35] .062 [1.58] .020 ± .003 [0.50 ± .007]
3/8 .375 [9.53] .093 [2.36] .020 ± .003 [0.50 ± .007]
1/2 .500 [12.7] .125 [3.18] .025 ± .003 [0.64 ± .007]
1-59
Catalog 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 01-09 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
MT-FEP (Heat-Shrinkable Fluorinated Ethylene Propylene)
RAYCHEM Tubing Products
1
Heat-shrinkable Tubing
Available in: Americas Europe Asia Pacific
■■■
Series Material Raychem
MT-FEP USP Class VI MT-FEP SCD
Altera Medical-Grade, USP
Class VI, Heat-Shrinkable
FEP Tubing
Product Facts
■Standard 1.6:1 shrink ratio
■Tight control of longitudinal
change, standard +/- 5%
■Custom ratios, sizes, and
longitudinal change
percentages available
■High temperature, low
friction, non-reactive
material
■Excellent electrical
insulation, mechanical
protection, and chemical
resistance
■Cut pieces, double bagged
■Transparent and resistant to
UV damage
■USP Class VI material, no
heavy metals
■Compatible with autoclave
sterilization; ethylene oxide,
steam, and dry-heat
■RoHS compliant
Specifications/Approvals
Applications
Designed specifically to
meet the demanding needs
of the catheter and medical
device industry. Well-suited
for process aid as well
as electrical insulation,
mechanical protection,
and chemical resistance.
Installation
Minimum shrink
temperature: 190°C [374°F]
Minimum full recovery
temperature: 210°C [410°F]
1-60
RAYCHEM Tubing Products
Catalog 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 01-09 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
MT-FEP (Continued)
As Supplied Recovered
Reference Chart Size Approximate Inside Inside Wall
Customer’s to Size for Diameter (D) Diameter (d) Thickness (W)
Substrate Order Reference Minimum Maximum Nominal
FR OD (in.) Fractional mm. in. in. in.
3 0.039 042 3/64 1.0 0.042 0.030 0.008 ± 0.002
4 0.053 062 1/16 1.5 0.062 0.040 0.008 ± 0.002
5 0.066 079 5/64 2.0 0.079 0.050 0.008 ± 0.002
6 0.079 100 3/32 2.5 0.100 0.062 0.008 ± 0.002
7 0.092 115 7/64 3.0 0.115 0.072 0.010 ± 0.002
8 0.105 136 1/8 3.5 0.136 0.084 0.010 ± 0.002
9 0.118 149 9/64 3.8 0.149 0.092 0.010 ± 0.002
10 0.131 166 11/64 4.2 0.166 0.102 0.010 ± 0.002
11 0.144 187 3/16 4.7 0.187 0.115 0.010 ± 0.002
12 0.158 200 13/64 5.0 0.200 0.122 0.010 ± 0.002
13 0.170 215 7/32 5.5 0.215 0.131 0.010 ± 0.002
14 0.184 233 15/64 6.0 0.233 0.142 0.010 ± 0.002
15 0.197 250 1/4 6.3 0.250 0.150 0.010 ± 0.002
16 0.210 266 17/64 6.7 0.266 0.160 0.010 ± 0.002
17 0.223 282 9/32 7.2 0.282 0.170 0.012 ± 0.003
18 0.236 299 19/64 7.5 0.299 0.180 0.012 ± 0.003
19 0.249 315 5/16 8.0 0.315 0.190 0.012 ± 0.003
20 0.263 335 21/64 8.5 0.335 0.200 0.012 ± 0.003
22 0.288 355 23/64 9.0 0.355 0.220 0.012 ± 0.003
24 0.315 397 25/64 10.0 0.397 0.240 0.015 ± 0.003
26 0.341 430 7/16 11.0 0.430 0.260 0.015 ± 0.003
28 0.367 462 15/32 11.7 0.462 0.280 0.015 ± 0.003
30 0.393 500 1/2 12.7 0.500 0.300 0.015 ± 0.003
32 0.419 533 17/32 13.5 0.533 0.320 0.015 ± 0.003
34 0.445 566 9/16 14.4 0.566 0.340 0.015 ± 0.003
Product Dimensions
Size selection Order the appropriate FEP size based on your substrate.
Example, 6F catheter has a 0.079” OD, order MT-FEP-100-X
Standard packaging Cleaned and packaged in a clean room
Cut pieces (actual length in inches) or spooled (plastic spool);
all variations are double-bagged in anti-static bags
Ordering Information
Part Numbering System
Packaging
Cut pieces (IN) or spooled (SP)
Color
Clear (-X) - Standard
Custom colors available on request
Recovered ID (IN)
Used for non-standard sizes only
Size
Size chart for standard sizes
Expanded ID (IN) for non-standard sizes
Product Name
MT-FEP - _ - _ - _ - _
Example of standard product, MT-FEP-115-X-60IN
Example of non-standard product, MT-FEP-.081-.078-X-36IN
1-61
Catalog 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 01-09 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
MT-LWA
RAYCHEM Tubing Products
1
Heat-shrinkable Tubing
Altera Medical Grade,
Laser-Welding Application
Process Aid, Polyolefin
Tubing
Product Facts
■3:1 shrink ratio, custom
ratios and sizes available
■Flexible; forms to irregular
shapes
■Good clarity needed for laser
welding and other bonding
operations
■Excellent electrical
insulation properties
■Removes easily after
application, good axial tear
propagation
■On plastic spools double bag
packaging
■USP Class VI, no heavy
metals
■RoHS compliant
Applications
Well-suited for laser-welding
operations of stents and
balloons, hot jaw bonding
or other secondary value-
added processes. Heat-
shrinkable product will hold
joints in place during opera-
tion and removes easily
without residue or damage
to the end product.
Installation
Minimum shrink
temperature: 95°C [203°F]
Minimum full recovery
temperature: 121°C [250°F]
Specifications/Approvals Series Raychem
MT-LWA MT-LWA SCD
Available in: Americas Europe Asia Pacific
■■■
1-62
RAYCHEM Tubing Products
Catalog 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 01-09 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
MT-LWA (Continued)
Product Dimensions As Supplied Recovered
Size Inside Diameter (D) Inside Diameter (d) Wall Thickness (W)
Minimum Maximum Nominal
in. in. in.
016 0.016 0.008 0.008 ± 0.002
032 0.032 0.011 0.010 ± 0.002
047 0.047 0.015 0.013 ± 0.002
063 0.063 0.016 0.016 ± 0.003
078 0.078 0.025 0.016 ± 0.003
094 0.094 0.031 0.020 ± 0.003
110 0.110 0.034 0.020 ± 0.003
Color Clear (-X) Only
Size selection Always order the largest size that will recover snugly over the substrate.
Special order sizes are available upon request.
Standard packaging On plastic spools (SP), double-bagged
Ordering description Specify product name and size (for example, MT-LWA-032-X-SP)
For non-standard sizes specify expanded ID and recovered ID
(for example, MT-LWA-.045-.024-X-SP)
Ordering Information
1-63
Catalog 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 01-09 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
MT-PBX (D*)
RAYCHEM Tubing Products
1
Heat-shrinkable Tubing
Available in: Americas Europe Asia Pacific
■■■
Series Material Raychem
MT-PBX(D*) USP Class VI MT-PBX(D*) SCD
MT-PBX(D*A) USP Class VI MT-PBX (D*A) SCD
Altera Medical-Grade, USP
Class VI, Heat Shrink
Polyether Block Amide
(PEBA) Tubing
D* = Durometer of material
Product Facts
■2:1 shrink ratio
■Tough robust material in a
variety of colors
■Flexible to semi-rigid; Shore
D Durometer dependent
■Excellent mechanical
protection properties
■Inner adhesive lining
optional [MT-PBX(D*A)]
■USP Class VI material, no
heavy metals
■Plastic spools and double-
bagged packaging
■Can withstand repeated
autoclave sterilization;
sterilization by Gamma
Radiation, Ethylene Oxide,
steam, and dry-heat
■RoHS compliant
Specifications/Approvals
Applications
Engineered for applications
requiring excellent
mechanical protection and
resistance to abrasion as
well as good electrical
insulation performance.
Also used for catheter
shafts, strain relief, identifi-
cation of components and
devices, and process aid.
Installation
Minimum shrink
temperature: 130°C to 150°C
[226°F to 302°F]
Minimum full recovery
temperature: 180°C to 190°C
[356°F to 374°F]
* = Durometer dependent
Operating Temperature Range
-70°C to 130°C
[-94°F to 226°F]
1-64
RAYCHEM Tubing Products
Catalog 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 01-09 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
MT-PBX (D*) (Continued)
Product Dimensions As Supplied Recovered
Size Inside Diameter (D) Inside Diameter (d) Wall Thickness (W)
Minimum Maximum Nominal
in. in. in.
014 0.014 [0.36] 0.007 [0.17] 0.002 ± 0.0005 [0.05 ± 0.01]
024 0.024 [0.60] 0.012 [0.30] 0.002 ± 0.0005 [0.05 ± 0.01]
040 0.040 [1.00] 0.020 [0.50] 0.004 ± 0.001 [0.102 ± 0.025]
060 0.060 [1.52] 0.030 [0.89] 0.004 ± 0.001 [0.102 ± 0.025]
100 0.100 [2.54] 0.050 [1.27] 0.004 ± 0.001 [0.102 ± 0.025]
120 0.120 [3.04] 0.060 [1.52] 0.004 ± 0.001 [0.102 ± 0.025]
Size selection Always order the largest size that will recover snugly over the substrate.
Special order sizes are available upon request.
Standard packaging On plastic spools, double-bagged
Ordering Information
Part Numbering System
Packaging
Spool, cut pieces length, sticks
Color
Black (-0), Clear (-X) - Standard
Blue (-6), Green (-5), White (-9), Yellow (-4)
Recovered ID (IN)
Used for non-standard expansion ratio only
Expanded ID (IN)
Durometer
25, 35, 40, 55, 63, and 72
A for adhesive lining option
Product Name
MT-PBX _-_-_-_-_
Example of standard product, MT-PBX72-100-X-6IN
Example of non-standard product with adhesive lining, MT-PBX55A-120-080-X-SP
1-65
Catalog 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 01-09 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
NT
RAYCHEM Tubing Products
1
Heat-shrinkable Tubing
Flexible, General Purpose
Modified Elastomeric
Tubing
Product Facts
■Remains flexible at
temperatures as low as
-55˚C [-67˚F]
■Offers good resistance to
abrasion and physical abuse
while providing the
flexibility and strain relief
needed in general-purpose
harnessing applications
■Resistant to most common
fluids and solvents
■RoHS compliant
Installation
Minimum shrink
temperature: 90°C [194°F]
Minimum full recovery
temperature: 135°C [275°F]
Operating Temperature Range
-55°C to 90°C
[-67°F to 194°F]
Specifications/Approvals
Applications
Widely used for insulation,
strain relief, and abrasion
protection on cable
harnesses and wire
bundles in the commercial
electronics industries where
a reliable general-purpose
tubing is needed. Suitable
for applications requiring
some exposure to common
fluids and solvents.
Available in: Americas Europe Asia Pacific
■■■
Series Raychem
NT RT-510
1-66
Catalog 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 01-09 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
NT (Continued)
RAYCHEM Tubing Products
Product Dimensions
Ordering Information
Inside Diameter Recovered Wall Thickness**
Size Minimum Expanded Maximum Recovered
as Supplied After Heating After Heating
1/8 3.2 [0.125] 1.6 [0.061] 0.69 ± 0.20 [0.027 ± 0.008]
3/16 4.8 [0.187] 2.5 [0.100] 0.84 ± 0.25 [0.033 ± 0.010]
1/4 6.4 [0.250] 3.6 [0.143] 0.89 ± 0.25 [0.035 ± 0.010]
3/8 9.5 [0.375] 5.5 [0.214] 1.01 ± 0.25 [0.040 ± 0.010]
1/2 12.7 [0.500] 7.3 [0.286] 1.21 ± 0.38 [0.048 ± 0.015]
5/8 15.9 [0.625] 9.1 [0.357] 1.32 ± 0.38 [0.052 ± 0.015]
3/4 19.1 [0.750] 10.9 [0.428] 1.44 ± 0.38 [0.057 ± 0.015]
7/8 22.2 [0.875] 12.7 [0.500] 1.65 ± 0.38 [0.065 ± 0.015]
1 25.4 [1.000] 14.5 [0.570] 1.77 ± 0.51 [0.070 ± 0.020]
1 1/4 31.8 [1.250] 18.1 [0.714] 2.20 ± 0.51 [0.087 ± 0.020]
1 1/2 38.1 [1.500] 21.8 [0.857] 2.41 ± 0.51 [0.095 ± 0.020]
1 3/4 44.5 [1.750] 25.4 [1.000] 2.71 ± 0.51 [0.107 ± 0.020]
2 50.8 [2.000] 29.0 [1.140] 2.79 ± 0.51 [0.110 ± 0.020]
3 76.2 [3.000] 43.4 [1.710] 3.17 ± 0.51 [0.125 ± 0.020]
4 101.6 [4.000] 57.9 [2.280] 3.55 ± 0.51 [0.140 ± 0.020]
**Wall thickness will be less if tubing recovery is restricted during shrinkage.
Color Standard Black (-0)
Size selection Always order the largest size that will shrink snugly over the component to be covered.
Special order sizes are available upon request.
Standard packaging On spools.
Ordering description Specify product name, size and color (for example, NT 1/4-0).
1-67
Catalog 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 01-09 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
RAYCHEM Tubing Products
1
Heat-shrinkable Tubing
NT-MIL
Available in: Americas Europe Asia Pacific
■■■
Applications
Widely used for insulation,
strain relief and abrasion
protection on cable
harnesses and wire
bundles in the military and
aerospace industries where
a reliable rugged tubing is
needed. Especially suitable
for applications requiring
exposure to common fluids
and solvents.
Installation
Minimum shrink
temperature: 90°C [194°F]
Minimum full recovery
temperature: 135°C [275°F]
Series Military Raychem
NT-MIL AMS-DTL-23053/1*, Classes 1 & 2 RW-3030
*Formerly MIL-I-23053/1 and MIL-DTL-23053/1
Flexible, Rugged,
Modified Elastomeric
Tubing
Product Facts
■Remains flexible at
temperatures as low as
-70°C [94°F] without
cracking
■Withstands heat shock at
200°C [392°F] without
dripping, flowing or cracking
■Offers outstanding
resistance to abrasion
and physical abuse while
providing flexibility and
strain relief needed in
rugged harnessing
applications
■Resistant to most fluids and
solvents, including aviation
and ground vehicle fuels,
lubricating oil, and hydraulic
fluids
■Meets the stringent
requirements of
SAE-AMS-DTL-23053/1,
Classes 1 and 2
■RoHS compliant
Specifications/Approvals
Operating Temperature Range
-70°C to 121°C
[-94°F to 250°F]
1-68
Catalog 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 01-09 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
RAYCHEM Tubing Products
NT-MIL (Continued)
Product Dimensions
Ordering Information
Inside Diameter Recovered Wall Thickness*
Size Minimum Expanded Maximum Recovered
as Supplied After Heating After Heating
1/8 3.2 [0.125] 1.6 [0.061] 0.69 ± 0.20 [0.027 ± 0.008]
3/16 4.8 [0.187] 2.5 [0.100] 0.84 ± 0.25 [0.033 ± 0.010]
1/4 6.4 [0.250] 3.6 [0.143] 0.89 ± 0.25 [0.035 ± 0.010]
3/8 9.5 [0.375] 5.4 [0.211] 1.01 ± 0.25 [0.040 ± 0.010]
1/2 12.7 [0.500] 7.3 [0.286] 1.21 ± 0.38 [0.048 ± 0.015]
5/8 15.9 [0.625] 9.1 [0.357] 1.32 ± 0.38 [0.052 ± 0.015]
3/4 19.1 [0.750] 10.9 [0.428] 1.44 ± 0.38 [0.057 ± 0.015]
7/8 22.2 [0.875] 12.7 [0.500] 1.65 ± 0.38 [0.065 ± 0.015]
1 25.4 [1.000] 14.5 [0.570] 1.77 ± 0.51 [0.070 ± 0.020]
1 1/4 31.8 [1.250] 18.1 [0.714] 2.20 ± 0.51 [0.087 ± 0.020]
1 1/2 38.1 [1.500] 21.8 [0.857] 2.41 ± 0.51 [0.095 ± 0.020]
1 3/4 44.5 [1.750] 25.4 [1.000] 2.71 ± 0.51 [0.107 ± 0.020]
2 50.8 [2.000] 29.0 [1.140] 2.79 ± 0.51 [0.110 ± 0.020]
3 76.2 [3.000] 43.4 [1.710] 3.17 ± 0.51 [0.125 ± 0.020]
4 101.6 [4.000] 57.9 [2.280] 3.55 ± 0.51 [0.140 ± 0.020]
*Wall thickness will be less if tubing recovery is restricted during shrinkage.
Color Standard Black (-0)
Size selection Always order the largest size that will shrink snugly over the component to be covered.
Special order sizes are available upon request.
Standard packaging On spools.
Ordering description Specify product name, size and color (for example, NT-MIL 1/4-0).
1-69
Catalog 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 01-09 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
RAYCHEM Tubing Products
1
Heat-shrinkable Tubing
NTFR
Very Flexible, Rugged
Neoprene Elastomer
Tubing
Product Facts
■Remains flexible at low
temperatures without
cracking
■Offers outstanding
resistance to abrasion and
physical abuse while
providing the flexibility and
strain relief needed for
rugged applications
■Resistant to most fluids and
solvents, including aviation
and ground-vehicle fuels,
lubricating oil, and hydraulic
fluids (see Raychem
Specification RT-511)
■Performance exceeds the
stringent requirements of
SAE-AMS-DTL-23053/1,
Class 2
■System 20
■RoHS compliant
Specifications/Approvals Series Military Agency Raychem
NTFR SC-X-15112 AMS 3623 RT-511
Available in: Americas Europe Asia Pacific
■■■
Applications
Widely used for insulation,
strain relief, and abrasion
protection on cable
harnesses and wire
bundles in the military
and aerospace industries.
Especially suitable for
applications requiring
exposure to fluids and
solvents at elevated
temperatures.
Installation
Minimum shrink
temperature: 90°C [194°F]
Minimum full recovery
temperature: 135°C [275°F]
Operating Temperature Range
-70°C to 121°C
[-94°F to 250°F]
1-70
Catalog 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 01-09 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
RAYCHEM Tubing Products
NTFR (Continued)
Product Dimensions
Ordering Information
Inside Diameter Recovered Wall Thickness**
Size Minimum Expanded Maximum Recovered
as Supplied After Heating After Heating
1/8 3.2 [0.125] 1.6 [0.061] 0.69 ± 0.20 [0.027 ± 0.008]
3/16 4.8 [0.187] 2.5 [0.100] 0.84 ± 0.25 [0.033 ± 0.010]
1/4 6.4 [0.250] 3.6 [0.143] 0.89 ± 0.25 [0.035 ± 0.010]
3/8 9.5 [0.375] 5.5 [0.214] 1.01 ± 0.25 [0.040 ± 0.010]
1/2 12.7 [0.500] 7.3 [0.286] 1.21 ± 0.38 [0.048 ± 0.015]
5/8 15.9 [0.625] 9.1 [0.357] 1.32 ± 0.38 [0.052 ± 0.015]
3/4 19.1 [0.750] 10.9 [0.428] 1.44 ± 0.38 [0.057 ± 0.015]
7/8 22.2 [0.875] 12.7 [0.500] 1.65 ± 0.38 [0.065 ± 0.015]
1 25.4 [1.000] 14.5 [0.570] 1.77 ± 0.51 [0.070 ± 0.020]
1 1/4 31.8 [1.250] 18.1 [0.714] 2.20 ± 0.51 [0.087 ± 0.020]
1 1/2 38.1 [1.500] 21.8 [0.857] 2.41 ± 0.51 [0.095 ± 0.020]
1 3/4 44.5 [1.750] 25.4 [1.000] 2.71 ± 0.51 [0.107 ± 0.020]
2 50.8 [2.000] 29.0 [1.140] 2.79 ± 0.51 [0.110 ± 0.020]
3 76.2 [3.000] 43.4 [1.710] 3.17 ± 0.51 [0.125 ± 0.020]
**Wall thickness will be less if tubing recovery is restricted during shrinkage.
Color Standard Black (-0)
Size selection Always order the largest size that will shrink snugly over the component to be covered.
Special order sizes are available upon request.
Standard packaging On spools.
Ordering description Specify product name, size and color (for example, NTFR 1/4-0).
1-71
Catalog 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 01-09 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
PD Caps
RAYCHEM Tubing Products
1
Heat-shrinkable Tubing
Available in: Americas Europe Asia Pacific
■■■
Series UL Raychem
PD Caps E85381 PD Caps SCD
600 V, 125°C
Semirigid,
Encapsulant-Lined,
Polyolefin Caps
Product Facts
■3:1 shrink ratio
■Permanent or temporary way
to terminate wires
■Rapid, simple installation
■Rugged protection against
abrasion, vibration, and
flexing
■PD caps provide a splash-
resistant, moisture-resistant
covering (but not intended
for use where immersion in
fluids is required)
■RoHS compliant
Specifications/Approvals
Applications
PD Caps offer an improved,
inexpensive way to
encapsulate crimped
electrical connections,
including those on motor
coils. Their encapsulant
lining melts and flows to fill
surface irregularities of the
substrate. These vibration-
proof caps are used to
insulate and terminate
dead-end electrical
cables, fixtures,
connectors, and other
electrical components.
Installation
Minimum shrink
temperature: 125°C [257°F]
Minimum full recovery
temperature: 135°C [275°F]
Operating Temperature Range
-55°C to 110°C
[-67°F to 230°F]
1-72
Catalog 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 01-09 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
PD Caps (Continued)
RAYCHEM Tubing Products
Color Standard Black (-0)
Size selection Always order the largest size that will shrink snugly over the component to be covered.
Special order sizes are available upon request.
Standard packaging In pieces.
Ordering description Specify product name, size and color (for example, PD Caps 1/4-0).
Product Dimensions
Ordering Information
Length Inside Diameter Recovered
Size Nominal Minimum Open Minimum Maximum Wall Thickness**
Overall as Barrel as Expanded Recovered Total Wall
Supplied Supplied* as Supplied After Heating After Heating
1/8 25.4 [1.00] 12.7 [0.50] 3.18 [0.125] 0.58 [0.023] 1.22 ± 0.15 [0.048 ± 0.006]
3/16 25.4 [1.00] 15.2 [0.60] 4.75 [0.187] 1.52 [0.060] 1.57 ± 0.20 [0.062 ± 0.008]
1/4 28.4 [1.12] 15.2 [0.60] 6.35 [0.250] 2.03 [0.080] 1.98 ± 0.25 [0.078 ± 0.010]
3/8 31.8 [1.25] 18.3 [0.72] 9.53 [0.375] 2.29 [0.090] 2.08 ± 0.25 [0.082 ± 0.010]
1/2 38.1 [1.50] 21.6 [0.85] 12.70 [0.500] 2.29 [0.090] 2.54 ± 0.25 [0.100 ± 0.010]
*See glossary for definition of “barrel.”
**Wall thickness will be less if recovery is restricted during shrinkage.
1-73
Catalog 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 01-09 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
PTCM
RAYCHEM Tubing Products
1
Heat-shrinkable Tubing
Very High-Shrink-Ratio,
Dual Wall, Flexible Heat-
Shrinkable Tubing
Product Facts
■6:1 shrink ratio
■Exceptional abrasion and cut
through resistance
■Low shrink temperature for
rapid installation
■Excellent mechanical
strength
■RoHS compliant
Applications
PTCM is a flexible, heat-
shrinkable, dual wall tubing
with an integrally bonded
meltable adhesive liner.
PTCM offers outstanding
mechanical and environ-
mental protection to wire
splices and terminals and is
used for moisture proof
encapsulation of a wide
variety of components. In
particular, it adheres well to
PVC. With an impressive
6:1 expansion ratio, one
product can protect and
insulate a wide range of
applications. PTCM also
offers exceptional clarity for
protection of substrates that
may need to be inspected
during service.
Installation
Minimum shrink
temperature: 60°C [140°F]
Minimum full recovery
temperature: 80°C [176°F]
Operating Temperature Range
-40°C to 85°C
[-40°F to 185°F]
Specifications/Approvals Series Raychem
PTCM RK-6768
Available in: Americas Europe Asia Pacific
■
1-74
Catalog 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 01-09 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
PTCM (Continued)
RAYCHEM Tubing Products
Product Dimensions
Ordering Information
Inside Diameter Recovered Wall Thickness*
Size Minimum Expanded Maximum Recovered
as Supplied After Heating After Heating
9/1.5 9.0 [0.354] 1.5 [0.059] 1.60 ± 0.20 [0.062 ± 0.008]
*Wall thickness will be less if tubing recovery is restricted during shrinkage.
Color Standard Clear (-X)
Size selection Always order the largest size that will shrink snugly over the component to be covered.
Standard packaging On spools.
Ordering description PTCM-9/1.5-X-SP
