TS63 Vishay Sfernice Multi-Turn Surface Mount Miniature 1/4" Square Cermet Trimmers, Fully Sealed FEATURES * 0.25 Watt at 85 C RoHS * Industrial grade COMPLIANT * Multi-turn operation The TS63 multiturn trimmer has been designed for use in PCB surface mounting applications. Three variations are available according to the positioning of the control screw and contact positions. The cermet track gives a high stability performance with an extended ohmic capacity of 10 to 2 M. * A low contact resistance variation (down to 2 % Rn) * Low end contact resistance (1 typical) * Full sealing * Tests according to CECC 41 000 DIMENSIONS in millimeters RECOMMENDED SOLDERING AREAS TS63X slot 0.5 x 0.5 5.8 0.10 5 max 0.25 1 1 0.10 y 1.8 2.54 c c 0.7 b O 0.45 b a 2.54 2.54 6.85 max 2.54 7.5 6.7 max 0.20 6.85 max TS63Z 6.85 max O 1.8 slot 0.5 x 0.5 3 1.3 0.1 b 5 max 9.3 7.6 max 0.25 6.85 max a c 1 0.1 8.85 max 1 2.54 O 0.45 5.3 max 2.54 2.54 2.54 6.85 max TS63Y c 2.54 6.85 max 0.3 1.3 0.1 b c 5 max slot 0.5 x 0.5 b a a O 0.45 2.54 6.85 max 2.54 2.54 1 3 7.5 O 1.8 6.7 max 1 0.10 8 max CIRCUIT DIAGRAM Tolerance unless otherwise specified 0.5 www.vishay.com 30 a c (1) (3) b (2) cw For technical questions, contact: sfer@vishay.com See also: Application notes Document Number: 51011 Revision: 01-Aug-06 TS63 Multi-Turn Surface Mount Vishay Sfernice Miniature 1/4" Square Cermet Trimmers, Fully Sealed ELECTRICAL SPECIFICATIONS Resistive Element Cermet Electrical Travel 13 turns 2 10 to 2 M Resistance Range Standard Series 1-2-5 Tolerance Standard 10 % On request Power Rating 5% Linear 0.25 W at 85 C Logarithmic not applicable Temperature Coefficient See Standard Resistance Element Data Limiting Element Voltage (Linear Law) 250 V 2 % Rn or 2 Contact Resistance Variation End Resistance (Typical) 1 Dielectric Strength (RMS) 1000 V Insulation Resistance 106 M Mechanical Travel Operating Torque (max. Ncm) End Stop Torque Unit Weight (max. g) Wiper (actual travel) POWER RATING CHART 15 turns 5 1.5 clutch action 0.5 Positioned at approx. 50 % ENVIRONMENTAL SPECIFICATIONS Temperature Range Climatic Category Sealing - 55 C to + 155 C 55/125/56 sealed container solder immersion IP67 0.25 POWER IN WATT MECHANICAL SPECIFICATIONS 0 50 0 85 100 155 125 AMBIENT TEMPERATURE IN DEGREES CELSIUS PERFORMANCE CECC 41100 TESTS Climatic Sequence CONDITIONS Phase A dry heat 125 C Phase B damp heat Phase C cold - 55 C Phase D damp heat 5 cycles Long Term Damp Heat 56 days 40 C 93 % RH Rotational Life (Electrical, Mechanical) Load Life Thermal Shock Shock Vibration Document Number: 51011 Revision: 01-Aug-06 TYPICAL VALUES AND DRIFTS RT (%) REQUIREMENTS RT R1-2 (%) R1-2 RT (%) RT R1-2 (%) R1-2 2% 3% 0.5 % 1% 2% 3% 0.5 % 1% Dielectric strength: 250 V RMS Insulation resistance: > 100 M Dielectric strength: 1000 V RMS Insulation resistance: > 104 M 200 cycles at rated power 2% Contact res. variat.: < 3 % Rn 2% Contact res. variat.: < 1 % Rn 1000 h at rated power 90'/30' - ambient temp. 85 C 2% Contact res. variat.: < 3 % Rn 5 cycles - 55 C to + 125 C 1.5 % 50 g at 11 ms 3 successive shocks in 3 directions 1% 10 - 55 Hz 0.75 mm or 10 g for 6 hours 1% V1-2 V1-3 V1-2 V1-3 For technical questions, contact: sfer@vishay.com See also: Application notes 4% 1% 2% Contact res. variat.: < 1 % Rn 1% 0.5 % 2% 0.1 % 2% 0.1 % V1-2 V1-3 <1% 0.2 % V1-2 V1-3 < 0.2 % www.vishay.com 31 TS63 Vishay Sfernice Multi-Turn Surface Mount Miniature 1/4" Square Cermet Trimmers, Fully Sealed MARKING STANDARD RESISTANCE ELEMENT DATA STANDARD RESISTANCE VALUES LINEAR LAW MAX. MAX. MAX. CUR. POWER WORKING THROUGH AT 85 C VOLTAGE WIPER W V mA ppm/C 10 20 50 0.25 1.58 2.23 3.53 158 112 77 0 + 200 5.00 7.07 11.2 15.8 22.3 35.3 50.0 70.7 79.0 112 158 224 250 250 250 250 50 35 22 15.8 11.2 7.1 5.0 3.5 3.2 2.2 1.6 1.1 1.1 0.50 0.25 0.125 100 200 500 1K 2K 5K 10K 20K 25K 50K 100K 200K 250K 500K 1M 2M 0.25 0.25 0.13 0.06 0.03 Printed: VISHAY trademark, model, style, ohmic value (in , k, M), tolerance (in %) only if non standard, manufacturing date, marking of terminal 3. TCR - 55 C + 125 C SOLDERING RECOMMENDATION Soldering cycle: 10 s at 220 C max or with an 40 W iron: 3 s at 350 C Soldering is recommended by reflow or vapour phase. 100 PACKAGING - X, Y and Z types: on tape and reel (Dia. 330 mm) of 500 pieces, code TR500. - On request in magazine pack by 50 pieces (Tube) code TU. ORDERING INFORMATION TS63 MODEL Y STYLE 500 k OHMIC VALUE 10 % TOLERANCE TR500 PACKAGING e3 LEAD FINISH TR500: Tape and reel On request: TU50: Tube e3: pure Sn SAP PART NUMBERING GUIDELINES T S MODEL 6 3 Y 5 STYLE 0 OHMIC VALUE 4 K TOL R 1 PACKAGING CODE 0 SPECIAL (IF APPLICABLE) See the end of this data book for conversion tables www.vishay.com 32 For technical questions, contact: sfer@vishay.com See also: Application notes Document Number: 51011 Revision: 01-Aug-06 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1