Multi-Turn Surface Mount
Miniature 1/4" Square Cermet Trimmers, Fully Sealed
www.vishay.com For technical questions, contact: sfer@vishay.com Document Number: 51011
30 See also: Application notes Revision: 01-Aug-06
TS63
Vishay Sfernice
FEATURES
0.25 Watt at 85 °C
Industrial grade
Multi-turn operation
A low contact resistance variation (down to 2 % Rn)
Low end contact resistance (1 Ω typical)
Full sealing
Tests according to CECC 41 000
The TS63 multiturn trimmer has been designed for use in
PCB surface mounting applications.
Three variations are available according to the positioning of
the control screw and contact positions.
The cermet track gives a high stability performance with an
extended ohmic capacity of 10 Ω to 2 MΩ.
DIMENSIONS in millimeters
TS63X
TS63Z
TS63Y
b
c
Ø 0.45
slot 0.5 x 0.5
0.25
5.8 ± 0.10
ÿ 1.8
0.7
6.85 max
6.85 max
0.20
2.54
2.54
5 max
1 ± 0.10
6.7 max
Ø 1.8
1.3 ± 0.1
7.6 max
2.54
2.54
Ø 0.45
6.85 max
0.25
slot 0.5 x 0.5
6.85 max
5 max
1 ± 0.1
8.85 max
5.3 max
c
b
1.3 ± 0.1
1 ± 0.10
Ø 0.45
a
6.85 max
0.3
Ø 1.8
8 max
slot 0.5 x 0.5
2.54
2.54
6.85 max
5 max
6.85 max
6.7 max
RECOMMENDED
SOLDERING AREAS
1
2.54
2.54
7.5
c
b
a
3
b
ca
9.3
2.54 2.54
1
2.54
2.54 1
7.5
c
b
a
3
CIRCUIT DIAGRAM
ac
bcw
(
2
)
(3)
(1)
RoHS
COMPLIANT
Tolerance unless otherwise specified ± 0.5
Document Number: 51011 For technical questions, contact: sfer@vishay.com www.vishay.com
Revision: 01-Aug-06 See also: Application notes 31
TS63
Multi-Turn Surface Mount
Miniature 1/4" Square Cermet Trimmers, Fully Sealed Vishay Sfernice
ELECTRICAL SPECIFICATIONS
Resistive Element Cermet
Electrical Travel 13 turns ± 2
Resistance Range 10 Ω to 2 MΩ
Standard Series 1 - 2 - 5
Tolerance Standard ± 10 %
On request ± 5 %
Power Rating Linear 0.25 W at 85 °C
Logarithmic not applicable
Temperature Coefficient See Standard Resistance Element Data
Limiting Element Voltage (Linear Law) 250 V
Contact Resistance Variation 2 % Rn or 2 Ω
End Resistance (Typical) 1 Ω
Dielectric Strength (RMS) 1000 V
Insulation Resistance 106 MΩ
MECHANICAL SPECIFICATIONS
Mechanical Travel 15 turns ± 5
Operating Torque (max. Ncm) 1.5
End Stop Torque clutch action
Unit Weight (max. g) 0.5
Wiper (actual travel)
Positioned at approx. 50 %
ENVIRONMENTAL SPECIFICATIONS
Temperature Range - 55 °C to + 155 °C
Climatic Category 55/125/56
Sealing sealed container
solder immersion IP67
POWER RATING CHART
050 100 155
0.25
0
AMBIENT TEMPERATURE IN DEGREES CELSIUS
POWER IN WATT
85 125
PERFORMANCE
CECC 41100 TYPICAL VALUES AND DRIFTS
TESTS CONDITIONS ΔRT
RT (%) REQUIREMENTS ΔR1-2
R1-2 (%) ΔRT
RT (%) ΔR1-2
R1-2 (%)
Climatic Sequence
Phase A dry heat 125 °C
Phase B damp heat
Phase C cold - 55 °C
Phase D damp heat 5 cycles
± 2 % ± 3 % ± 0.5 % ± 1 %
Long Term Damp Heat 56 days
40 °C 93 % RH
± 2 % ± 3 % ± 0.5 % ± 1 %
Dielectric strength: 250 V RMS
Insulation resistance: > 100 MΩ
Dielectric strength: 1000 V RMS
Insulation resistance: > 104 MΩ
Rotational Life
(Electrical, Mechanical) 200 cycles at rated power ± 2 % ± 2 %
Contact res. variat.: < 3 % Rn Contact res. variat.: < 1 % Rn
Load Life 1000 h at rated power
90’/30’ - ambient temp. 85 °C
± 2 % ± 4 % ± 1 % ± 2 %
Contact res. variat.: < 3 % Rn Contact res. variat.: < 1 % Rn
Thermal Shock 5 cycles
- 55 °C to + 125 °C ± 1.5 % ΔV1-2
V1-3 ± 1 % ± 0.5 % ΔV1-2
V1-3 < ± 1 %
Shock
50 g at 11 ms
3 successive shocks
in 3 directions
± 1 % ± 2 % ± 0.1 % ± 0.2 %
Vibration
10 - 55 Hz
0.75 mm or 10 g
for 6 hours
± 1 % ΔV1-2
V1-3 ± 2 % ± 0.1 % ΔV1-2
V1-3 < ± 0.2 %
www.vishay.com For technical questions, contact: sfer@vishay.com Document Number: 51011
32 See also: Application notes Revision: 01-Aug-06
TS63
Vishay Sfernice Multi-Turn Surface Mount
Miniature 1/4" Square Cermet Trimmers, Fully Sealed
MARKING
Printed: VISHAY trademark, model, style, ohmic value (in Ω,
kΩ, MΩ), tolerance (in %) only if non standard, manufacturing
date, marking of terminal 3.
SOLDERING RECOMMENDATION
Soldering cycle: 10 s at 220 °C max or with an 40 W iron:
3 s at 350 °C
Soldering is recommended by reflow or vapour phase.
STANDARD RESISTANCE ELEMENT DATA
STANDARD
RESISTANCE
VALUES
LINEAR LAW TCR
- 55 °C
+ 125 °C
MAX.
POWER
AT 85 °C
MAX.
WORKING
VOLTAGE
MAX. CUR.
THROUGH
WIPER
ΩWV mAppm/°C
10
20
50
0.25 1.58
2.23
3.53
158
112
77
0
+ 200
100
200
500
1K
2K
5K
10K
20K
25K
50K
100K
200K
250K
500K
1M
2M
0.25
0.25
0.13
0.06
0.03
5.00
7.07
11.2
15.8
22.3
35.3
50.0
70.7
79.0
112
158
224
250
250
250
250
50
35
22
15.8
11.2
7.1
5.0
3.5
3.2
2.2
1.6
1.1
1.1
0.50
0.25
0.125
± 100
PACKAGING
- X, Y and Z types: on tape and reel (Dia. 330 mm) of 500 pieces, code TR500.
- On request in magazine pack by 50 pieces (Tube) code TU.
ORDERING INFORMATION
TS63
MODEL
Y
STYLE
500 kΩ
OHMIC VALUE
± 10 %
TOLERANCE
TR500
PA CK A G I N G
e3
LEAD FINISH
TR500: Tape and reel
On request: TU50: Tube
e3: pure Sn
SAP PART NUMBERING GUIDELINES
TS63Y504 KR10
MODEL STYLE OHMIC
VALUE TOL PACKAGING
CODE
SPECIAL
(IF APPLICABLE)
See the end of this data book for conversion tables
Legal Disclaimer Notice
Vishay
Document Number: 91000 www.vishay.com
Revision: 08-Apr-05 1
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.