www.mill-max.com DATA SHEET PRODUCT NUMBER: 1706-0-15-15-35-14-04-0 DESCRIPTION Receptacle With A Standard Tail Durability: 1,000 Cycles Minimum Current Rating: 3A @ 10C Temperature Rise Contact Resistance: 10 m Max Operating Temperature Range: -55/+125 C Vibration: No Elect. Discontinuity > 1s @ 10-2000HZ, 20 G Shock: No Elect. Discontinuity > 1s @ 50g Accepts .015"-.026" (0,381-0,660mm) diameter leads. Mounting Feature: Press-Fit into a Non-Plated Through Hole (NPTH) or Insulator Tail Type: Soldertail Mounting Hole: .057" (1,448mm) Tail Diameter: .020" (0,508mm) Packaging: 15 - Packaged in Bulk Shell Plating Contact Plating 10 " Gold over Nickel 10 " Gold over Nickel ROHS CONTACT: Product Number 1706-0-15-15-35-14-04-0 Data Sheet mill-max.com Updated 1/2/21 6:36 PM EST - Page 1 of 3 Pin Diameter Range .015"-.026" (0,381-0,660mm) Material Beryllium Copper Current Rating (amps) 3.00 Fingers 6 Compliancy .008" (0,203mm) Length .080" (2,032mm) Group Code C CONTACT MATERIAL: BERYLLIUM COPPER ALLOY 172 (UNS C17200) per ASTM B 194 Properties of BERYLLIUM COPPER: Chemical composition: Cu 98.1%, Be 1.9% Hardness: 36-43 Rockwell C Density: .298 lbs/in3 Electrical Conductivity: 22% IACS* Resistance: 10 m Max Operating Temperature: -55C/+125C Melting point: 980C/865C (liquidus/solidus) Stress Relaxation: 96% of stress remains after 1,000 hours @ 100 C; 70% of stress remains after 1,000 hours @ 200 C *International Annealed Copper Standard, i.e. as a % of pure copper. Since BeCu loses its spring properties over time at high temperatures; it is rated for continuous use up to 150C. For applications up to 300C, Mill-Max offers other materials. Contact Tech Support for more info. STANDARD TOLERANCES ON PCB TERMINAL PINS & RECEPTACLES Diameters +/-.002" Lengths +/-.005" Angles +/- 2 STANDARD TOLERANCES ON SPRING-LOADED PINS Diameters +/-.002" Lengths +/-.006" Angles +/- 2 ADDITIONAL NOTES & SPECIFICATIONS In the interest of improved design, quality and performance , Mill-Max reserves the right to make changes in its specifications without prior notice. Specifications and tolerances are provided wherever possible. The tolerance on dimensions of critical to function features is typically held tighter than the stated standard tolerances, such as press-fits, holes and lengths affecting the coplanarity of SMT products. Due to the Product Number 1706-0-15-15-35-14-04-0 Data Sheet mill-max.com Updated 1/2/21 6:36 PM EST - Page 2 of 3 wide variety of interconnects Mill-Max offers, the specific tolerances vary from product to product. If you need information regarding the tolerance of a particular part, please contact Technical Services. (c) 2021 Mill-Max Mfg. Corp. 190 Pine Hollow Rd , Oyster Bay, NY 11771, USA Phone: 516.922.6000 Product Number 1706-0-15-15-35-14-04-0 Data Sheet mill-max.com Updated 1/2/21 6:36 PM EST - Page 3 of 3