Shell Plating Contact Plating ROHS
10 μ" Gold over Nickel 10 μ" Gold over Nickel
www.mill-max.com
DATA SHEET
PRODUCT NUMBER: 1706-0-15-15-35-14-04-0
DESCRIPTION
Receptacle With A Standard Tail
Durability:
1,000 Cycles Minimum
Current Rating:
3A @ 10°C Temperature Rise
Contact Resistance:
10 mΩ Max
Operating Temperature Range:
-55/+125° C
Vibration:
No Elect. Discontinuity > 1μs @ 10-2000HZ, 20 G
Shock:
No Elect. Discontinuity > 1μs @ 50g
Accepts .015"-.026" (0,381-0,660mm) diameter
leads.
Mounting Feature:
Press-Fit into a Non-Plated Through Hole (NPTH) or
Insulator
Tail Type: Soldertail
Mounting Hole: .057" (1,448mm)
Tail Diameter: .020" (0,508mm)
Packaging: 15 - Packaged in Bulk
CONTACT:
Product Number 1706-0-15-15-35-14-04-0 Data Sheet mill-max.com Updated 1/2/21 6:36 PM EST - Page 1 of 3
Pin Diameter Range .015"-.026" (0,381-0,660mm)
Material Beryllium Copper Current Rating (amps) 3.00
Fingers 6Compliancy .008" (0,203mm)
Length .080" (2,032mm) Group Code C
CONTACT MATERIAL:
BERYLLIUM COPPER ALLOY 172 (UNS C17200) per ASTM B 194
Properties of BERYLLIUM COPPER:
Chemical composition: Cu 98.1%, Be 1.9%
Hardness: 36-43 Rockwell C
Density: .298 lbs/in3
Electrical Conductivity: 22% IACS*
Resistance: 10 mΩ Max
Operating Temperature: -55°C/+125°C
Melting point: 980°C/865°C (liquidus/solidus)
Stress Relaxation : 96% of stress remains after 1,000 hours @ 100 °C; 70% of stress remains after 1,000 hours @ 200 °C
*International Annealed Copper Standard, i.e. as a % of pure copper.
Since BeCu loses its spring properties over time at high temperatures; it is rated for continuous use up to 150°C. For applications up to
300°C, Mill-Max offers other materials. Contact Tech Support for more info.
†
†
STANDARD TOLERANCES ON PCB TERMINAL PINS & RECEPTACLES
Diameters +/-.002"
Lengths +/-.005"
Angles +/- 2°
STANDARD TOLERANCES ON SPRING-LOADED PINS
Diameters +/-.002"
Lengths +/-.006"
Angles +/- 2°
ADDITIONAL NOTES & SPECIFICATIONS
In the interest of improved design, quality and performance , Mill-Max reserves the right to make changes in its specifications without prior
notice. Specifications and tolerances are provided wherever possible. The tolerance on dimensions of critical to function features is typically
held tighter than the stated standard tolerances, such as press-fits, holes and lengths affecting the coplanarity of SMT products. Due to the
Product Number 1706-0-15-15-35-14-04-0 Data Sheet mill-max.com Updated 1/2/21 6:36 PM EST - Page 2 of 3
wide variety of interconnects Mill-Max offers, the specific tolerances vary from product to product. If you need information regarding the
tolerance of a particular part, please contact Technical Services.
© 2021 Mill-Max Mfg. Corp.
190 Pine Hollow Rd , Oyster Bay, NY 11771, USA
Phone: 516.922.6000
Product Number 1706-0-15-15-35-14-04-0 Data Sheet mill-max.com Updated 1/2/21 6:36 PM EST - Page 3 of 3
