M12 Accessories Identification Part number Drawing M12-male moving load A-coding Circular Connectors 21 03 030 1400 HARTING M12 T-Coupler Profibus 21 03 321 9400 A-coding 21 03 319 9501 Crimping tool for M12 Crimp 09 99 000 0501 Accessories M12 Crimp D-Sub contacts Part number Locator for D-Sub contacts 09 99 000 0531 for contact 21 01 100 9020 61 03 600 0023 AWG Tool settings 18 6 09 67 000 3x76 20 6 22 5 09 67 000 8x76 20, 22, 24 6 09 67 000 5x76 22, 24, 26 6 D-Sub single contacts (500 mating cycles) turned male contacts AWG 22 - 18 / 0.33 - 0.82 mm AWG 24 - 20 / 0.25 - 0.52 mm AWG 26 - 22 / 0.13 - 0.33 mm AWG 28 - 24 / 0.09 - 0.25 mm 09 67 000 3576 09 67 000 8576 09 67 000 5576 09 67 000 7576 turned female contacts AWG 22 - 18 / 0.33 - 0.82 mm AWG 24 - 20 / 0.25 - 0.52 mm AWG 26 - 22 / 0.13 - 0.33 mm AWG 28 - 24 / 0.09 - 0.25 mm 09 67 000 3476 09 67 000 8476 09 67 000 5476 09 67 000 7476 turned male contact for 8 pole connectors, A-coding, AWG 26 - 22 21 01 100 9020 M12 dynamometric screwdriver Tightening torque 0.6 Nm 03 54 for M12-S SW 13 09 99 000 0382 for M12 Slim design SW 15 09 99 000 0646 for M12-L SW 17 09 99 000 0384 Further information and data sheets see www.HARTING.com AWG 22 - 18 AWG 24 - 20 AWG 26 - 22 a 1.34 1.13 0.88