RECEIVER NR4210 Series DESCRIPTION The NR4210 Series products consist of InAIAs-APD (avalanche photo diode) ROSAs (Receiver Optical Sub-Assembly) with internal pre-amplifiers IN U designed for 10 Gb/s long-reach optical transceivers such as the ED InAlAs APD RECEIVER WITH INTERNAL PRE-AMPLIFIER FOR 10 Gb/s APPLICATIONS XENPAK/X2/XFP. These modules are ideal as receivers for IEEE 10G BASE and SONET OC-192 systems. FEATURES * XMD-MSA compliant ROSA O NT * 10 Gb/s high sensitivity InAlAs-APD * +3.3 V SiGe transimpedance pre-amplifier * Minimum receiver sensitivity Pr = -28 dBm * Operating case temperature TC = -5 to +85C * Transimpedance Zt = 2 000 (Single-ended) * Cut-off frequency fc = 8 GHz DI SC * With flexible printed circuit Document No. PL10637EJ01V0DS (1st edition) Date Published September 2006 NS CP(K) 2006 NR4210 Series PACKAGE DIMENSIONS (UNIT: mm) NR4210TF 7.00.1 4.640.05 11.51+0.1 -0.15 6.60.1 ED OFF-SET (0.2) 5.50.02 O NT 4.70.1 (2.51) 2.40.1 16.50.3 IN U OPTICAL REFERENCE PLANE 5.6 MAX. 16.2 5.6 2.0 13.2 3.0 Preliminary Data Sheet PL10637EJ01V0DS 6-0.35 Rth 5.8 2 5-0.79 Vapd 0.27 DI SC BOTTOM VIEW NC GND DATA N DATA P GND VCC NR4210 Series NR4210TG 5.00.1 5.150.05 0.550.03 1.35 OPTICAL REFERENCE PLANE 3.50.02 5.6 MAX. IN U 1.3 14.00.3 8.7+0.1 -0.15 4.05 2.920.01 ED OFF-SET (0.2) 5.50.02 O NT 16.2 5-0.79 Rth 2.0 13.2 Preliminary Data Sheet PL10637EJ01V0DS NC GND DATA N DATA P GND VCC 6-0.35 5.8 5.6 Vapd 0.27 DI SC BOTTOM VIEW 3.0 3 NR4210 Series NR4210TK 5.00.1 3.80.02 5.50.02 5.6 MAX. ED 2.990.01 5.150.05 0.550.03 OPTICAL REFERENCE PLANE IN U 12.70.3 7.5 4.05 OFF-SET (0.2) O NT 20.2 5.8 4 5-0.79 5.6 Vapd Rth 2.0 17.2 Preliminary Data Sheet PL10637EJ01V0DS 3.0 6-0.35 0.27 DI SC BOTTOM VIEW NC GND DATA N DATA P GND VCC NR4210 Series NR4210TL 5.00.1 3.50.02 IN U 5.6 MAX. ED 0.550.03 1.35 OPTICAL REFERENCE PLANE 1.3 14.00.3 8.7+0.1 -0.15 4.05 2.920.01 5.150.05 OFF-SET (0.2) 5.50.02 O NT 20.2 5.8 5-0.79 5.6 Vapd Rth 2.0 17.2 Preliminary Data Sheet PL10637EJ01V0DS NC GND DATA N DATA P GND VCC 6-0.35 0.27 DI SC BOTTOM VIEW 3.0 5 NR4210 Series NR4210TP 5.00.1 ED 5.150.05 2.990.01 0.550.03 OPTICAL REFERENCE PLANE 3.80.02 IN U 12.70.3 7.5 4.05 OFF-SET (0.2) 5.50.02 5.6 MAX. O NT 16.2 6 5-0.79 Rth 2.0 13.2 Preliminary Data Sheet PL10637EJ01V0DS 3.0 6-0.35 5.8 5.6 Vapd 0.27 DI SC BOTTOM VIEW NC GND DATA N DATA P GND VCC NR4210 Series NR4210TX 7.00.1 6.60.1 4.640.05 11.51+0.1 -0.15 ED OFF-SET (0.2) IN U (2.51) 2.40.1 16.50.3 OPTICAL REFERENCE PLANE 4.70.1 5.50.02 O NT 5.6 MAX. 16.2 5-0.79 Rth 2.0 13.2 Preliminary Data Sheet PL10637EJ01V0DS NC GND DATA N DATA P GND VCC 6-0.35 5.8 5.6 Vapd 0.27 DI SC BOTTOM VIEW 3.0 7 NR4210 Series BLOCK DIAGRAM Flexible Printed Circuit 0.01F ED Vapd 100 pF GND GND GND APD IN U DATA P TIA 0.1F 100 pF GND GND Rth DI SC O NT VCC 8 DATA N Preliminary Data Sheet PL10637EJ01V0DS GND Rth NR4210 Series ORDERING INFORMATION Receptacle Type Flexible PCB Type NR4210TF-AZ SC, Zirconia Standard NR4210TG-AZ LC, Electrically Isolated Standard NR4210TK-AZ LC, Zirconia Long NR4210TL-AZ LC, Electrically Isolated Long NR4210TP-AZ LC, Zirconia Standard NR4210TX-AZ SC, Metal Standard ABSOLUTE MAXIMUM RATINGS Symbol APD Reverse Voltage VR APD Reverse Current IR (peak) IC Supply Voltage VCC Operating Case Temperature TC Storage Temperature Tstg Lead Soldering Temperature Tsld Unit VBR V 4 mA 0 to +4 V -5 to +85 C -40 to +85 C 350 (3 sec.) C DI SC O NT (Flexible Printed Circuit) Ratings IN U Parameter ED Part Number Preliminary Data Sheet PL10637EJ01V0DS 9 NR4210 Series ELECTRO-OPTICAL CHARACTERISTICS (TC = -5 to +85C, VCC = +3.3 V, = 1 550 nm, unless otherwise specified) Symbol APD Sensitivity S APD Breakdown Voltage Conditions MIN. TYP. = 1 310 nm, M = 1 0.75 0.9 = 1 550 nm, M = 1 0.75 0.9 ID = 10 A VBR *1 TC = +25 to +85C APD Dark Current ID VR = VBR x 0.9, TC = +25C Transimpedance Zt Single-ended Vclip Single-ended Temperature Coefficient of APD Maximum Output Voltage Swing Cut-off Frequency 35 V 0 0.02 0.05 V/C 0.7 A 800 2 000 3 000 100 125 200 mVpp 9 M = 9, Pin = -24 dBm 7 Lower Cut-off Frequency fCl Peaking DPK 1G-BW, M = 9, Pin = -24 dBm Group Delay GD 1G-6G, M = 9, Pin = -24 dBm Minimum Receiver Sensitivity 9.95 Gb/s, BER = 10 -28 , Mopt, GHz 8 -50 -12 Pr A/W 30 M = 3, Pin = -24 dBm fC Unit 25 IN U Breakdown Voltage MAX. ED Parameter 100 kHz 2 dB +50 ps -26.5 dBm PRBS = 2 -1, ER = 13 dB, NRZ 31 9.95 Gb/s, BER = 10- , M = 3, 12 PO O NT Overload -5 dBm PRBS = 2 -1, ER = 13 dB, NRZ 31 RF Output Return Loss IC Supply Current IC Supply Voltage Optical Return Loss Thermistor Resistance Thermistor B Constant VBR T C 1G-6G, M = 9, Single-ended 10 -6 dB ICC 40 55 75 mA VCC +3.1 +3.3 +3.5 V = 1 310 nm -27 dB = 1 550 nm -27 ORL Rth 9.5 10 10.5 k B 3 350 3 450 3 550 K DI SC *1 = S22 Preliminary Data Sheet PL10637EJ01V0DS NR4210 Series REFERENCE Document Name Opto-Electronics Devices Pamphlet Document No. *1 PX10160E DI SC O NT IN U ED *1 Published by the former NEC Compound Semiconductor Devices, Ltd. Preliminary Data Sheet PL10637EJ01V0DS 11 ED NR4210 Series DI SC O NT IN U * The information in this document is current as of September, 2006. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. * NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. * NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E 02. 11-1 12 Preliminary Data Sheet PL10637EJ01V0DS NR4210 Series Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. ED 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth. Optical Fiber A glass-fiber is attached on the product. Handle with care. * When the fiber is broken or damaged, handle carefully to avoid injury from the damaged part or fragments. DI SC O NT IN U Caution For further information, please contact NEC Compound Semiconductor Devices Hong Kong Limited E-mail: contact@ncsd-hk.necel.com Hong Kong Head Office TEL: +852-3107-7303 FAX: +852-3107-7309 Taipei Branch Office TEL: +886-2-8712-0478 FAX: +886-2-2545-3859 Korea Branch Office TEL: +82-2-558-2120 FAX: +82-2-558-5209 NEC Electronics (Europe) GmbH http://www.eu.necel.com/ TEL: +49-211-6503-0 FAX: +49-211-6503-1327 California Eastern Laboratories, Inc. http://www.cel.com/ TEL: +1-408-988-3500 FAX: +1-408-988-0279 Compound Semiconductor Devices Division NEC Electronics Corporation URL: http://www.ncsd.necel.com/ 0604 D 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 UE Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. IN CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Lead (Pb) Mercury < 1000 PPM Concentration contained in CEL devices -A Not Detected < 1000 PPM Not Detected < 100 PPM Not Detected SC O Cadmium Concentration Limit per RoHS (values are not yet fixed) NT Restricted Substance per RoHS Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. DI Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.